1、a c - . - a d h a NIL-G-51375 13 9999906 0333998 b m- MIL-E51375 (EA) MILITARY SPECIFICATION GRENADE, HAND: RIOT, CS, E47 This specification is approved for use by all Departments and Agencies of the Department of Defense. 1, SCOPE 1.1 This specification coyers one type grenade. 2. APPLICABLE DOCUIJ
2、ENTS 2.1 Government documenfx. The following documents of the issue in effect on date of invitation for bids or request for proposal, form a part of this specification to the extent specified herein: SPECIFICATIONS FEDERAL TT-W-572 - Wood Preservative, Water Repellent. PPP-B-601 - Boxes, Wood, Cleat
3、ed-Plywood. PPP-B-621 - Boxes, Wood, Nailed and Lock-Corner. PPP-F-320 - Fiberboard; Corrugated and Solid, Sheet Stock PPP-T-97 - Tape, Pressure Sensitive Adhesive, Filament Reinforced. (Container Grade) and Cut Shapes. MILITARY MIL-P- - Preservation, Methods of. MIL-B-117 - Bags, Sleeves and Tubing
4、, Interior Packaging. MIL-B-2427 - Boxes, Ammunition Packing; Wood, Bailed. MIL-B-46506 - Box, Ammunit ion Packing , Wood, Wirebound. STANDARDS MILITARY MIL-STD-105 - Sampling Procedures and Tables for Inspection MIL-STD-129 - Marking for Shipment and Storage. by Attributes. FSC 1330 THIS DOCUMENT C
5、ONTAINS kf PAGES. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-G-51375 13 a 7777706 0333779 W MIL-m-i168 - Lot Numbering of Ammunition. DRAWINGS us ARMY AFuumm COMMAND EDEWOOD ASF;NAL D13-25-70 - Grenade, Hand, Riot, CS, M47. (Copies. of speei
6、ficatioris , standards, drawings and publications required by suppliers in connection with specific procurement functions should be obtained from the procuring activity or as directed by the contracting officer . ) 3. REQUIRESIENTS 3.1 Material and components. 3.1.1 Material. All material cited on D
7、rawing D13-25-70 or on the subsidiary drawings shall conform to the specifications listed thereon or to the spectfic characteristics set forth on the drawings. 3.1.2 Cmponents. All components of the grenade shall conform to the specifications and drawings lisked on Drawing D13-25-70 and subsidiary d
8、rawings. 3.1.3 CS riot mixture. (a) Volatile content. Volatile content of the final mix (when loaded into the munition) shall not be more than 0.5 percent by weight when tested as specified in 4.4.4.i(a) (see 6.4). (b specified in Granulation. 4.4.4 ,i (b 1. The final mixture shall meet the requirem
9、ent s 3.2 Assembly. 3.3 Functionin The grenade shall perform as follows when tested The grenade shall be assembled as shown on drawing Dl3-25-70, as specified -; m .4.2. (a) The fuze shall function and cause the fill to ignite and emit a continuous cloud under continuous pressure for no less than 5
10、seconds and no more than 25 seconds. Flaming (see 6.5) shall not occur for more than 10 percent of the emission time 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-G-51375 13 m 9799906 033qOOO 9 MIL-G-51375 (EA) (b) The time measured from audi
11、ble functioning of the fuze to first smoke emission under pressure shall be no less than 0.5 seconds and no more than 4.0 seconds. on the ground. The primer shal function prior to impact (c) The grenade shall move/skitter on the ground during at least 50 per- cent of the smoke emission time when fun
12、ctioning on a hard level surface. 3.4 Immersion. The grenade shall not have any evidence of leakage after water immersion and shall conform to the requirements of 3.3 when tested as specified in 4.4.4.2, 3.5 Preproduction. Prior to the start of regular production, a pre- production lot of grenades s
13、hall be produced in accordance with this specification for examination and tests. 3.6 Workmanshi . “he grenade shall be free from foreign matter (oil or grease Il-E and damage such as cracks, breaks or deformation which could affect its intended use. 4. QUALITY ASSWCE PROVISIONS 4.1 Responsibility f
14、or inspection, 4 J.1 Supplier Is responsibility. Unless otherwise specified in the contract or purchase order, the supplier is responsible for the perfor- mance of all inspection requirements as specified herein. otherwise specified in the contract or order, the supplier may use his own or any other
15、 facilities suitable for the performance of the inspec- tion requirements specified herein, unless disapproved by the Government, The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and serv
16、ices conform to specified requirements. Except; as 4.1.2 Objective evidence. The supplier shall provide objective evi- dence acceptable to the contracting officer that the requirements of 3.1 and section 5 for which specific inspection has not been provided in this specification have been satisfied.
17、 4.2 Classification of inspections. (a) (b ) Preproduction inspection (see 4.3 ) . mality conformance inspection (see 4.4 ) . 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-G-51375 13 777970b 033L1001 O MIL-G-51375 (EA) 4.3 Preproduction inspe
18、ction, 4.3.3 Lot. - A preproduction lot of 250 grenades shall be produced using the same methods, materials, equipment and processes as will be used during regular production . 4.3.2 Inspection. procedure. 4.3.2.1 For examination and tests. The grenades and components shall be randomly sampled and i
19、nspected in accordance with table I, Table I. Preproduction sampling, inspection and acceptance/rejection criteria * t Quantity : Requirement : Test : Accept : Reject : : from each batch (see 6.3) : 3.1.3 : 4.4.4.1 : o: 1 : 65 grenades 3.2 4.4.3.4 : 1: 2 -l. 3.3 4.4.4.2 : *i : 2 : 1/2 pound CS/Pyro
20、mix : er impact of grenade on ground) Duci (fize fails to function or CS pyrotechnic mix fails to ignite ) Failure to emit a cbntinuous cloud for the required time (5 to 25 seconds) Delay incorrect (0.5 to 4.0 seconds) 5. PREPARATION FOR DELIVERY 5.1 Packaging, level A. Four grenades shall be packag
21、ed in a two-section foamed plastic container conforming to Drawing D13-25-81. shall be secured together with two bands of 3/4-inch-wide pressure-sensitive tape conforming to PPP-T-97, type I applied girthwise in the provided grooves. The container shall then be placed within a barrier bag measuring
22、i5 inches wide by i5 inches long, conforming to type I, Class E, style I of MIL-B-117, in accordance with method lX-8 of MIL-P-I., except that the backing material shall be spunbonded polyolefin or nylon. The barrier bag shall be closed by heat sealing and evacuating the included air volume within t
23、he sealed bag sufficiently to conform to the bagged item. The barrier bag shall be sub- sequently tested for leakage in accordance with the leak test requirements The two sections of MIL-P-116. 5.2 Paoking, level A. Five packages of grenade (20 grenades) packaged in accordance with 5.1 shall be pack
24、ed in an overseas type or Class box conforming to PPP-B-601, PPP-B-621 or type I, Class 2, Grade A of MIL-B-46506, &side dimensions of the box in inches shall be approximately 22 3/4 long by 8 3/4 wide by 9 deep. thereof, shall be immersed for a minimum of one minute in wood preservative conforming
25、to Composition A of Fi-W-572. boxes treated with wood preservative, the box shall meet the dryness require- ments for preservative as specified in MIL-B-2427. ing to type CF, variety SW, grade W5c of PPP-F-320, shall be used between the sides, ends, top and bottom of the box and contents. Additional
26、 pads shall be used as required to make a tight pack. accordance with the appendix of the applicable box specification. Prior to loading, the box or all wood components Prior to packing the item in the Fiberboard -pads conform- The box shall be closed in 5.3 Palletization. When required by the contr
27、act or order, grenades packed as specified in 5.2 shall be palletized in accordance with Drawing DL3-25-75. 5.4 Marking. or order, unit packages shall be marked in aceordance with MIL-STD-l29 to include “Lot Number“. Drawing D13-25-74. In addition to any special marking required by the contract Shipping containers shall be marked in accordance with 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
