1、INCH POUND MIL-I-87097A (CG) Interim Amendment 1 21 April 2003 MILITARY SPECIFICATION INSIGNIA, EMBROIDERED (COAST GUARD) This amendment forms a part of Military Specification MIL-I-87097A, dated 18 May 1992, and is approved for use by the US Coast Guard, Department of Homeland Security, and is appr
2、oved for use by all Departments and Agencies of the Department of Defense. Page 1, 1.1 Scope. Line 2, add: “and collar” after “worn on the sleeve”. Page 1, 1.2, Classification Add “Type VII Shirt Collar, Petty Officer” Page 2, 2.1.1, Under the heading SPECIFICATIONS MILITARY Add: MIL-C-44436, class
3、1, dyed CG Blue 3362, Cloth, Camouflage Pattern, Wind Resistant Poplin, Nylon/ Cotton Blend. Page 4, 3.3.1, delete and substitute: “3.3.1 Background cloth. The background cloth for all embroidered designs except the petty officers shirt collar device shall conform to the requirements for type III, c
4、lass 3 of MIL-C-823. The background cloth for the petty officers collar device shall conform to the requirements specified in MIL-C-44436, class 1. The color of both fabrics shall match CG Blue 3362. Page 4, 3.3.5.1, Rayon yarn. Delete the second sentence and substitute: The white yarn for the Port
5、Securityman “PS” capital block letters, the shield of the petty office collar device, and the gold yarn for the chevrons of the petty officer collar device shall be 100/2 (+/-5) denier.” Page 4, 3.3.5.1.1 Colors. Add: “Gold Cable No. 67104”. FSC 8455 Distribution Statement A. Approved for public rel
6、ease; distribution is unlimited. 1Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-I-87097A(CG) Amendment 1 Page 4, 3.3.5.1.1 Colors. line one, after “ rayon” add: “or polyester”. Page 4, 3.3.5 Schiffli-Embroidery Yarns. Add new paragraph 3.3.5.2
7、Polyester yarn. Two-ply polyester yarn is authorized in lieu of rayon. The polyester face yarn for the white, scarlet, and emerald green shades shall be 70/2 denier Schiffli yarn. The white yarn for the Port Securityman “PS” capital block letters, the shield for the petty officer collar device, and
8、the gold yarn for the chevrons of the petty officer collar device shall be 90/2 denier. Testing shall be as specified in 4.4.1. Page 8, Table II Color and Material for Design. Add the following new requirements under their respective columns “ CG 07, Blue plain weave, N/A, N/A, Gold, N/A, N/A, N/A,
9、N/A, White. Page 9, Table III, Stitch Requirements. At the bottom of table and under their respective columns add the following: “Type VII, Collar device, Petty Officer First Class, 1029, Figure 16, 1-7/16 x 1-5/16, 16-1-525 Second Class, 842, Figure 16, 1-5/16 x 1-5/16, 16-1-525 Third Class, 645, F
10、igure 16, 1-3/16 x 1-5/16, 16-1-525”. Page 12, add: “3.6.8 Type VII. Collar device, Petty Officer (Schiffli construction)- The insignia shall be embroidered in accordance with the color and fabric requirements specified for CG-07 in Table II and the stitch requirements for Type VII in Table III. Edg
11、e stitching shall be approximately 1/16 inch from folded finished edge.” Page 17, 4.4.5, Table VIII, after “Rayon” add: “and Polyester” yarns. Page 18, Section 5, PACKAGING Add: “Type VII, Collar device, Petty Officer. The insignia shall be packaged in accordance with the industrys practice.” Page 3
12、7, Add Figure 16 Type VII, Collar Device, Petty Officer (encl 1). _ Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in preparing this document should be addressed to: US Coast Guard Clothing Design and Technical Office, PO Box 869, Natick, MA 01760._ Custodian: Preparing Activity: Coast Guard CDTO Coast Guard - CDTO 2Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
