1、MIL-M-63375 13 m 7777906 03q7254 5 m 3 - 37-1 9 MIL-M-63375(AR) 16 MARCH 1981 MILITARY SPECIFICATION MOTOR-DETONATOR ASSEMBLY , ROCKET , INERT FOR DEMOLITION KIT, CRATERING, TRAINING, XM270, LOADING, ASSEMBLING AND PACKING This specification is approved for use by US Army Armament Research and Devel
2、opment Command and is available for use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 This specification covers the loading, assembling and packing for one type of Motor-detonator assembly designated as Motor-detonator Assembly, Rocket, Inert for Demolition Kit, Craterin
3、g, Training, XM270. 2. APPLICABLE DOCUMENTS 2.1 Issues of documents. The following documents of the issue in effect on date of invitation for bids, or request for proposals, form a part of this specification to the extent specified herein. SPECIFICATIONS MILITARY MIL-A-48078 - Amnunition, Standard Q
4、uality Assurance Provisions, General Specification For STANDARDS MILITARY MIL-STD-105 - Sampling Procedures and Tables for MIL-STD-1188- Commercial Packaging of Supplies and Equipment Inspection by Attributes FSC 1375 Provided by IHSNot for ResaleNo reproduction or networking permitted without licen
5、se from IHS-,-,-MIL-M-63375 13 706 03Li7255 7 d MIL-M-63375 (AR) DRAWINGS (See 6.5) U.S. ARMY RESEARCH AND DEVELOPMENT COMMAND 9331232 - Box, Packing, Wood, Nailed 9331651 - Rocket Motor Detonator Assembly (Inert) 9332620 - Packing and Marking for Box, Packing, Wood Nailed, for Demolition Kit, Crate
6、ring, Training, XM270 (inert) (Copies of specifications, standards, drawings and publications required by suppliers in connection with specific procurement functions should be obtained from the procuring activity or as directed by the Contracting Officer). 3. REQUIREMENTS 3.1 Material. Materials and
7、 parts shall be in accordance with applicable drawings and specifications. 3.2 Components, sub-assemblies and assemblies. The components, sub-assemblies and assemblies shall comply with all requirements specified on Dwg. 9331651 and associated drawings, and with all requirements specified in applica
8、ble specifications and standards. 3.3 First article Inspection. This specification contains technical provisions for first article inspection. the submission of first article samples by the contractor shall be as specified in the contract. Requirements for 3.4 Workmanship. All parts, sub-assemblies
9、and assemblies shall be free of burrs, chips, sharp edges, cracks, surface defects, dirt, grease, rust, scales, corrosion and other foreign matter. The cleaning method used shall not be detrimental to any of the parts nor shall the parts be contaminated by the cleaning agent. All required markings s
10、hall be neat and sharply defined. coatings shall be continuous except for a few light scratches which do not expose base material. components, sub-assemblies and assemblies shall be restored when such paintings and coatings have been marred or obliterated. Surface Paintings and coatings on all 4. QU
11、ALITY ASSURANCE PROVISIONS 4.1 Responsibility for inspection and. standard quality assurance provisions. Unless otherwise specified herein or in the contract, the provisions of MIL-A-48078 shall apply and are hereby made a part: of this detail specification. 2 Provided by IHSNot for ResaleNo reprodu
12、ction or networking permitted without license from IHS-,-,-MIL-M-63375 13 7797706 0347256 7 MIL-M-63 3 7 5 (.AR 4.2 Classification of inspections. The following types of inspection shall be conducted on this item: a. First Article Inspection be Quality Conformance Inspection 4.3 - First - article in
13、spection 4.3.1 Submission. The contractor shall submit a first article sample designated by the Contracting Officer for evaluation in accordance with provisions of 4.3.2, consist of the following items in.sample quantities as indicated below: The first article sample shall . Part Description Drawing
14、 Quantity Rocket Motor Detonator Assembly (Inert) 9331651 10 Detonator Assembly (Inert) 9331653 10 Rocket Motor Assembly (Inert) 9331652 10 Clamp Conduit 9244410 10 4.3,2 Inspections to be performed. See MIL-A-48078 and Table I specified herein. 4.3.3 Rejection. See MIL-A-48078. 3: Provided by IHSNo
15、t for ResaleNo reproduction or networking permitted without license from IHS-,-,-I I l l 1 I I r Y c MIL-M-63375 13 7777706 0347257 O d d B l-l I ._ n U k H 2 U h rl P B a, 01 4 b O U m u al P b O U C z Y “ -. : c d rl N b . 5 O 4 . c! ? .5 . r! N m m r! m N m I I I I O 4 O 4 O FI 8 rn 4 rn 4 Provid
16、ed by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-! MIL-M-63375 13 9999906 0349258 2 li 4.4 Quality conformance inspection 4.4.1 Inspection lot formation. Inspection lots shall comply with the lot formation provisions f MIL-A-48078. inspection lots of Rocket
17、 Motor Assemblies shall contain: In addition, a. Parts and assemblies from not more than one interfix lot number from one manufacturer. 4.4.2 Examination. See MIL-A-48078. a. Sampling plans. Unless otherwise specified .in the Classification of Defects and test tables, sampling plans with major and m
18、inor defects shall be in accordance with MIL-STD-105, Inspection Level II. 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- MIL-M-63375 13 m 7777706 0347257 Li w as w w w w ON 000000 rn 000000 O $e* W . X m e a .A i i k k O O a rcc O al u a I4 3 W
19、G 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-I I 1 I l r ul w c d r u n 8 Y w z O h rl P El al o) 4 al m (d u k O U E 5 r2 U al r 2 m N m w w O In d W O O . r: c rl k O O a W II .rl W 2 O O c o .A c W k al al al a U al aJ a (d .rl al 2 FI Fil
20、Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-M-63375 13 = 9999906 0349267 3 rl m a i! rld rl mm m 33 3 mm v rl *rl .rl 33 b- by w 0- O0 ln D O O0 . YP a .rl 5 E d & k O O a rCI O a, V 1J *rl 3 w 3 14 I Provided by IHSNot for ResaleNo reproduct
21、ion or networking permitted without license from IHS-,-,-P i ! MIL-M-63375 13 m 9999906 0349268 5- c, 4 u O rl . Y ? * a O00 O000 Cu cci k 1 m 1 owcci O0 u rl rd1 - 15 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-M-63375 13 = 7777906 0349269 7
22、 ii d B t d z n U k H h rl P B al v) 2 W 4 k O U (d U al R k O U g 8 2 U 3 d d . N 4 1 1 c E 88 .e. O0 O00 kiu oa 16 I -m Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- MIL-U-63375 23 W 7777906 03i.17270 3 I! I r( 8 r( B E a 2 w E Ya zz E k! w I A
23、a W a a 2 rl cd .e O000 O0 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-XIL-M- 6 3 3 7 5 (AR 4.4.3 Testing. Testing is described in the First Article and Quality Conformance Inspection Tables. 4.4.4 Inspection equipment, The inspection equipment r
24、equired to perform the inspections and tests prescribed in this specification is identified in the Paragraph Reference/Inspection Yethod column in the tables starting with paragraph 4.4.2.1, The contractor shall submit for approval, inspection equipment designs in accordance with the terms of the co
25、ntract, See section 6 of YIL-A-48078 and 6.3 herein. 4.5 Test method and procedures 4.5.1 Yaterials, Components and processes. Compliance with all requirements of Section 3 of this specification shall be ascertained cy current and continuing examination of inspection and test data to determine that
26、all components (parts, subassemSlies, and materials) have been inspected and tested and found to comply with their respective drawing and specification requirements, and that all specified manufacturing processes have been followed. 4.5.1.1 Visual and mecharrical inspections. The visual, manual and
27、mechanical inspections and tests shall verify compliance with requirements of Sections 3 and 5 of this specification in accordance with 4.L1.2 herein and Table I. 5. 2ACKAGIEIG 5.1 Preservation and packaging. Packaging shall be in I accordaxe with YIL-STD-1188. 5.2 Packing. Packing shall be in accor
28、dance with drawing 9332620. 5.3 Marking. Harking shall Se in accordance with drawing 9332620. 6. NOES 6.1 Intended use, The booster assembly covered by this specification is used in the Rocket Yotor Assembly and is a component of the Demulition Kit Cratering, Training, XX270. 6.2 Ordering data. See
29、YIL-A-48078, 6.3 Submission of inspection equipment designs for approval. See MIL-A-48078. Submit equipment designs as required to Commander, V.S, Army Research and Development Cormand, ATTN: DRDAR-QU-I, Dover, hew Jersey 07801. 18 t . -. - . . . . . - . -. Provided by IHSNot for ResaleNo reproducti
30、on or networking permitted without license from IHS-,-,-I . . MIL-M-63375 13 7777706 0347272 7 W MIL-M- 6 3 3 7 5 (AR 6.4 Distribution of amunition data cards Distribution of data cards shall include the following: Commander, ARRADCOM, ATTN: DRDAR-QAA-M, Dover, New Jersey 07801. 6.5 Drawings. Drawin
31、gs listed in Section 2 of this specification under the heading U.S. Army Armament Research and Development Command (ARRADCOM) may also include drawings prepared by, and identified as Edgewood Arsenal, Frankford Arsenal, Rock Island Arsenal or Picatinny Arsenal drawings . Technical data originally prepared by these activities is now under the compliance of ARRADCOM . . Custodian: Amy-AR Preparing Activity: Army-AR Project No.: 1375-A-140 *U.S. GOVERNMENT PRINTING OFFICE: 1981-703-023/i436 I 19 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-