1、- 5-37-43 MIL-M-634q7 13 M 7779306 0350761 5 W MIL-M-63449 (AR) 11 MARCH 1982 MILITARY SPECIFICATION MINE, ANTI-TANK, TRAINING: M85 WITH FUZE, MINE, ANTI-TANK, TRAINING; PARTS FOR AND LOADING, ASSEMBLING AND PACKING This specification is approved for use by the U.S. Army Armament Research and Develo
2、pment Conmiand, and is available for use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 Scope. This specification covers quality assurance provisions and - preparation for delivery of the M85 Anti-Tank Training Mine. 2. APPLICABLE DOCUMENTS 2.1 Government-documents. 2.1.1
3、. Specifications-arid- standards. Unless otherwise specified (see 6.2), the following specifications and standards, of the issue listed in that issue of the Department of Defense Index of Specifications and Standards (DoDISS) specified in the solicitation, form a part of this specification to the ex
4、tent spec if ied herein. SPECIFICATIONS MILITARY MIL-M-45406 - Mine, Anti-Tank, M21, Parts For. MIL-F-45430 - Fuze, Mine AT, M607, Parts For. MIL-A-48078 - Ammunition, Standard Quality Assurance Provisions, General Specification For. STANDARDS MILITARY MIL-STD-105 - Sampling Procedures And Tables Fo
5、r Inspection By Attributes. Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improvin this document should be addressed to: Commander, US Army Armament desearch and Develo ment Command, Standardization Document Improvement Proposai (DD Form 14
6、26) appearing at the end of this document or by letter. Attn. DRDAR-QA, Dover, New Jersey 07801 by using t R e self-addressed Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-L flIL-fl-634L17 13 7777906 0350762 7 a MIL-M-63449 (AR) 2.1.2 ther-Governme
7、nt-documentsj-drawings;.and.pubications. The following other Government documents, drawings, and publications form a part of this specification to the extent specified herein. DRAWINGS (see 6.4) US ARMY ARMAMENT RESEARCH AND DEVELOPMENT COMMAND 9343033 - Mine, Anti-Tank, Training: M85 with Fuze, Min
8、e, Anti-Tank, Training. 9344288 - Packing and Marking for Mine, AT, Training: M85 (Copies of specifications, standards, drawings, and publications required by manufacturers in connection with specific acquisition functions should be obtained from the contracting activity or as directed by the contra
9、cting officer. ) 2.1.3 Order-of-precedence. of this specification and the references cited herein, the text of this specification shall take precedence. In the event of a conflict between the text 3. REQUIREMENTS 3.1 Materiais- and- parts. Materials and parts shall be in accordance with the applicab
10、le drawings, specifications and standards. 3.2 Mine- assemby. The mine assembly shall comply with all requirements specified on drawing 9343033, all associated drawings, and with all requirements specified in applicable specifications and standards. 3.3 First-artice-inspection. This specification co
11、ntains technical provisions for first article inspection. Requirements for the submission of first article samples by the contractor shall be as specified in the cont.ract. 3.4 Workmanship. The mine assembly shall be fabricated and finished in a thorough, workmanlike manner, It shall be free of burr
12、s, chips, sharp edges, cracks, unblended radii, surface defects, dirt, grease, rust, corrosion products, and other foreign matter. The cleaning method used shall not be injurious to the parts nor shall the parts be contaminated by the cleaning agents. All markings and stampings shall be neat and sha
13、rply defined. mine shall be manufactured and processed in such a manner as to be uniform in quality and free from defects that will affect life, configuration and serviceability. The 4. QUALITY ASSURANCE PROVISIONS 4.1 provisions, provisions of MIL-A-48078 shall apply and are hereby made a part of t
14、his detail spec if ication. Responsibility- for- inspection- and- standard-quality- assurance Unless otherwse specified herein or in the contract, the 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-M-634LI7 13 7777906 0350763 7 - MIL-M-63449 (
15、AR) 4.2 Classification of inspections. The following types of inspections shalL be conducted on this item: a. First article .inspection (see 4.3). b. Quality conformance inspection (see 4.4). 4.3 First article inspection, 4.3.1 Submission. The contractor shall submit a first article sample as The fi
16、rst article sample shall consist of the following designated by the Contracting Officer for evaluation in accordance with the provisions of 4.3.2. items in sample quantities as indicated below and Table 1. Part Des cr ip ti on Drawings Metal parts assembly 8831343 Body assembly 934709 2 Fuze, Mine,
17、AT, Training 9 3430 35 Mine, AT, Training - M85 9343034 Mine, AT, Training: M85 with Fuze, Mine, AT, Training 9343033 Quant it y 10 10 10 10 10 4.3.2 Inspections to be performed. See MIL-A-48078 and Table I specified herein. 4.3.3 Kejection. See MIL-A-48078. 3 Provided by IHSNot for ResaleNo reprodu
18、ction or networking permitted without license from IHS-,-,-8 4 MIL-M-b3llll7 13 77777Ob 03507bll O Wb - D - 4 N e Q m N 4- e cl m tw N m m N m N m u3 u u al W 9) -a k -0 mw m oc mO Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-tlIL-M-63LILI7 13 777
19、7906 0350765 2 = MIL-M- 6344 9 (AR) 4.4 Oiialty conformance inspection. _-._ -_.- 4.4;1 Inspection lot formation. Inspection lots shall comply with the lot formation provisions of MIL-A-48078. 4.4.2 Examination. See MIL-A-48078. Unless otherwise specified in the Classification of Defects and Tests T
20、ables, sampling plans for major and minor defects shall be in accordance with MIL-STD-105, Inspection Level II. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-W u 3 E O U E U I MIL-M-63447 13 7779706 0350766 4 - CJ CJ rn m n n m m W W CI .rl u4 al a
21、 $ u u a, al a v) i? h h n P a a al al k k .rl .FI 7 w 3 CT al al k k ln v) 4 4 al z d .rl a al k .rl al $4 v) m al ,.cl l4 l4 m 2 -fi m .rl k al u .rl 5 2 al u u a a, u u m u O 4 m 2 al I4 o .FI u 2 k U Fri KI .- . Provided by IHSNot for ResaleNo reproduction or networking permitted without license
22、 from IHS-,-,-MIL-M-634LI 13 7977906 0350767 b W c, H w U W W u E! c O u rl I U dl4l44t-4 cd(d(dmcd 53355 x M &O x N M x M O00 00000 N O i-( O00 00000 -? ? al u O 2 -. d .rl e n PI (d u al M Fi (d 5 wl O uv) O0 a d 4-1 O) a 2 I-l (dl Provided by IHSNot for ResaleNo reproduction or networking permitt
23、ed without license from IHS-,-,-4 b t I4 w alal cc - MIL-M-63447 13 77777Ob 0350770 b I- - I4 rlrlrl a amrd 353 .rl .A .rl .rl 3 333 m wrnw M OH M o InInM 4 amo o O04 . k O 2 60 (d TI 3 n k u o cdcdo dl 10 3 a i i Provided by IHSNot for ResaleNo reproduction or networking permitted without license f
24、rom IHS-,-,-MIL-M-63499 23 m 779770b 0350772 = 4.4.3 Testing. Testing is described in the First Article and Quality Conformance-inspection tables. . 5.4.4 - Inspection equipment. - The inspection equipment required to perform the inspections and tests prescribed herein is described in the Paragraph/
25、Inspection Method columnn in the tables starting with Paragraph 4.4.2.1. The contractor shall submit for approval inspection equipment designs i.n accordance with the terms of the contract. See Section 6 of MIL-A-48078 snd 6.3 herein. 5 PACKAGING I 5.1 Preservation - and packaging. The mines shall b
26、e preserved and packaged in accordance with Dwg. 9344288. 5.2 Packing. The mines, preserved and packaged, shall be packed for shipment in accordance with Dwg. 9344288. 5.3 .Marking. Marking of the carton shall comply with Dwg. 9344288. 5.4 Shipping. When mines of more than one lot are shipped as a c
27、arload, each lot shall be kept separate and the division between lots clearly indicated to prevent mixing of the lots in transit. 6. NOTES 6.1 Intended use. The mine covered by this specification is intended for tise as a training device. 6.2 Ordering data. See MIL-A-48078. 6.3 Submission of inspect
28、ion equipment designs For approval. (See 6.2 _-.-_._.-._l-_ll _I-p of MIL-A-48078). Equipment designs shal be submitted as required to:Co&nander, U.S. Army Armament Research and Development Command, ATTN: DRDAR-QAT-I, Dover, New Jersey 07801. Request letter of submittal .should state contractor, con
29、tract number, specification number, item nomenclature, and classification of defects and test paragraph number. 1 6.4 Drawings. - Drawings listed in Section 2 of this specification under the heading US Army Armament Research and Development Command (ARRADCOM) may also include drawings prepared by an
30、d identified as: Edgewood Arsenal, Frankford Arsenal, Rock Island Arsenal, or Picatinny Arsenal drawings. Technical data originally prepared by these activities are now under the cognizance of ARRADCQM. 6.5 Distribution of certificate of compliance. Distribution of the certificate of compliance for
31、each lot shall be sent to: Commander, ARRADCOM, ATTN: DRDAR-QAT-M, Dover, New Jersey 07801. 11 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-_ - MIL-M-634Ll7 13 W 7777906 0350772 T W MIL-M-63449 (AR) 6.6 Data cards. (See MIL-A-48078). Distribution of data cards shall include the address specified in 6.5. Cus t od ian : Preparing activity . Aw-AR Amy-AR Project 1345-A157 “ f? U.S. GOVERNMENT PRINTING OFFICE: le82 O - 505-02211844 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
