1、p MIL-P-5133 (1) 13 797970b 0333752 7 MILITmY SPECIFICATION PROJECTILE, 105MM SMOKE, wp, 1460131; FILLING ASSEMBLY This amendment forms a part of Military Specification i-L-P-51338(), 20 my 1969. MIL-P- 51338(m) AME-1 12 October 1970 Page 1 2.1: Add the following, after MIL-STD-105: “MIL-STD- - Lot
2、Numbering of Ammunition.“ Page 3 4.2.1: Delete in its entirety and substitute the following: “4.2.1 Lotting. Each lot shall be identified and controlled in accordance with MIL-sTD-. tiUed projectiles, no more than one interfix number from one manu- facturer of the following components is permitted:
3、Contained in any one interfix number of (a) Projectile bodies (b) Burster casings“. Paffe 5 4.2.4.2: Delete in its entirety and substitute the following: “4.2.4.2 Leakage. The projectile shall be placed in an oven in a vertical, filling-end-down position and maintained at 160 + 5 F tem- perature for
4、 the required time. Alternate method: The projctile shall be placed in an oven at 207 to 212 F in a vertical fillin -end-down perature of the projectiles shall be measured by thermocouples or ther- mometers in the burster wells of at least two projectiles in each oven batch. position for the require
5、d time. When testing at 207 b to 212 % F the tem- Leakage shall be determined by visual examination. I 6.4 In first sentence delete “and wire brushes“ and place a period after “lances. I Custodian: Army-w Preparing activity: Army - MmN FSC 1315 f? U. S. GOVERNMENT PRINTING OFFICU 1970.&f& -. i Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
