1、MIL-P-5532bA 58 W 7779706 OLb55L7 O W ,di - MIL-P-55326A (CR) Superseding MIL-A-55326(EL) 21 January 1971 11. July 1978 MILITARY SPECIFICATION PRINTED CIRCUIT BOARD PL-l208/VRC This specification is approved for use by the US Army Communi- cations Research and Development Command, Department of the
2、1. SCOPE 1.1 Scope. This specification covers one type of Printed Circuit Board designated PL-l208/VRC which is used in vehicular communications systems utilizing TSEC/KY-8 units (See 6.1) 2, APPLICABLE DOCUMENTS 2.1 Issues of documents. The following documents, of the issue in effect on date of inv
3、itation for bids, form a part of this specification to the extent specified herein. SPECIFICATIONS Federal NN-P-71 Pallet, Material Handling, Wood Stringer Construction, 2-Way and $-Way (Partial) QQ- S- 7 8 1 Strapping, Steel, Flat and Seals Improvement Proposal (DD Form 1426) appearing at the end o
4、f this document or by letter. FSC-5810 pHI$ DOCUMENT CONTABNS PPP-B-621, style 4, class 2; or PPP-B-585, style 2 or 3, class 3. When the gross weight exceeds 200 pounds, or the container length and width is 48 x 24 inches or more and the weight exceeds 100 pounds, 3 x 4 inch skids, laid flat, shall
5、be applied in accordance with the requirements of the container specification, or if not specified in the specification, in a manner which will adequately support the item and facilitate the use of material handling equipment. Closure and strapping shall be in accordance with the applicable containe
6、r specifica- tion or appendix thereto except that metal strapping shall conform to QQ-S-781, type I, finish A. 5.2.2 Level B. A quantity of Printed Circuit Board PL-l208/VRC, unit packed as specified in 5.1, shall be packed within a close-fitting box conforming to PPP-B-640, class 2, style E, or PPP
7、-B-636, type CF, class weather-resistant. The gross weight of boxes conforming to PPP-B-640 shall not exceed 250 pounds. Closure shall be in accordance with the appendix of the applicable box specification. Reinforcing shall be by pressure-sensitive filament tape banding or nonmetallic strapping con
8、forming to PPP-T-97 and PPP-S-760, respectively: selection of the material and application shall be in accordance with the appendix of the applicable box specification. When the gross weight exceeds 200 pounds, or the container length and 23 a-.,- Licensed by Information Handling ServicesMIL-P-55326
9、A (CR) width is 48 x 24 inches or more and the weight exceeds 100 pounds, containers will be pallet-mounted on pallets conforming to NN-P-71, group I or II woods. The load shall be “bonded“ to the pallet by strapping conforming to QQ-S-781, type I, finish A, or shrink film. 5.2.3 Commercial packing.
10、 Packing shall be in accordance with MIL-STD-1188. 5.3 Marking. 5.3.1 Military marking. In addition to any special marking required by the contract or order, interior packs and exterior shipping containers shall be marked in accordance with MIL-STD-129. 5.3.2 Commercial marking. In addition to any s
11、pecial marking required by the contract or order, interior packs and exterior shipping containers shall be marked in accordance with MIL-STD-13.8 8, 24 Licensed by Information Handling ServicesMIL-P-55326A 58 7979706 Olb5.541 m MIL-P-5 5326A (CR) 6. NOTES 6.1 Intended use. Printed Circuit Board PL-l
12、208/VRC is intended primarily for use in a vehicular communication system. The unit is normally used with the TSEC/KY-8 and HYL-3/TSEC. (See 1.1) 6.2 Ordering data. Procurement documents should specify the following:. a. Title, number, and date of this specification and any amendment thereto. b. Typ
13、e required. c. Level A, level B or Commercial preservation and packing. (See Section 5). d. First article pack(s) as follows: Makeup of pack (s) . Number of each kind of pack to be submitted. Inspection to be performed thereon. e. Marking and shipping of samples. f. When rough handling test is requi
14、red. g. Size data. Size limitations cited herein are based on the dimensions of the equipment for which these requ,ire- ments were established. Requests to exceed these limitations must be supported by data indicating why limitation cannot be met and recommend a revised limitation. 25 Licensed by In
15、formation Handling ServicesMIL-I?- 5 53 2 6A(CR) 6.3 Definit,ions. 6.3.1 Branching. Branching is a connected arrangement of ilaments (hyphae) formed by shoots or secondary stems growing from the main stem or filament (hypha). 6.32 Growth colonization. Growth colonization is a mass o individual plant
16、s, generally of one species, living together: or a group of hyphae which is formed from one spore or cell and may be one individual plant. covers the surface of the nutrient material constitutes abundant growth. Colonization which completely 6.3.3 Microbial growth. Microbial growth is the growth o v
17、ery minute orqanisms. Such organisms when present in large number; may proviide a colony visible to the naked eye. 6.3.4 Sporulation. Sporulation is the formation of minute unicellular reproductive or dormant bodies, called spores . 6.3.5 Tubular germination. Tubular germination is partial growth by
18、 the production of hyphae, which are tubular shaped fkngal filaments. individual spore growth not proceeding to colonization. Tubular germination constitutes restricted 26 Licensed by Information Handling ServicesMIL-P-55326A 58 7797906 0365543 1 6.3.6 Equipment divisions. The terms used herein for
19、equipment divisions conform to MIL-STD-280. 6.3.7 Definitions of inspection terms. The inspection terms used herein conform to MIL-STD-109. The followinu are abbreviated definitions selected from those given therein for immediate reference. 6.3.7.1 Inspection. Inspection .is the examination or testi
20、ng or both, of supplies to determine compliance with applicable requirements. Sampling is an element of inspection. 6.3.7.2 Examination. Examination consists of simple, generally non-destructive determinations of compliance, without use of special testing equipment. 6.3.7.3 Testing. Testing consists
21、 of determinations of compliance, using technical means. 6.4 Humidity. Natural climatic extremes may include 100 percent relative humidity, with condensation, up to 4 hours at a time. This requirement (see 3.8.3) is specified by MIL-STD-210. The moisture resistance test, using MIL-STD-810, is a proc
22、edure that gives a practical test approximating the natural conditions. 6.5 Group C inspection. Approval to ship may be withheld, at the discretion of the Government, pending the decision from the contracting officer on the adequacy of corrective action (see 4.5.3.3). 6.6 Location of operational tes
23、ts. It is required that the operational tests be performed at a location that will minimize handling after this inspection is completed (see 4.7.7). 27 Licensed by Information Handling ServicesMIL-P-55326A (CR) 6.7 Environmental. Environmental pollution prevention measures axe contained in the packa
24、ging material specifications referenced herein, preparing activity for recommended disposability methods. Refer to material specifications or 6.8 Changes from previous issue. Asterisks are not used in this revision issue, due to the extensiveness of the changes. to identify changes with respect to the previous CUSTODIAN: ARMY-CORADCOM 28 PREPARING ACTIVITY; ARMY-CORADCOM PROJECT NR. 5810-AO36 Licensed by Information Handling Services?b o Cu MIL-P-5 532 6A (CR) 29 Licensed by Information Handling Servicesd- “in,i a I v) “I 30 Licensed by Information Handling Services
