1、AMSC N/A FSC 5910 INCH-POUND MIL-PRF-55514/10E 6 September 2013 SUPERSEDING MIL-PRF-55514/10D 18 October 2005 PERFORMANCE SPECIFICATION SHEET CAPACITORS, FIXED, PLASTIC DIELECTRIC, DC, IN NONMETAL CASES, ESTABLISHED RELIABILITY, STYLE CFR15 This specification sheet is approved for use by all Departm
2、ents and and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-PRF-55514. NOTES: 1. Dimensions are in inches. 2. Millimeters are in parentheses. 3. Metric equivalents are given for general information
3、only. FIGURE 1. Style CFR15 capacitors. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-55514/10E 2 TABLE I. Capacitor characteristics. Characteristic K, style CFR15 capacitors Part or identifying number (PIN) 1/ Capacitance (F) Capacitance t
4、olerance available dc Voltage at +105C (volts) Voltage at +85C at 20 kHz (volts) dv/dt volt/s (volts) D L .062 CFR15AKC123- .012 J, K, M 200 60 300 .179 (4.55) .047 (1.19) .750 (19.05) CFR15AKC153- .015 J, K, M 200 60 300 .197 (5.00) .047 (1.19) .750 (19.05) CFR15AKC183- .018 J, K, M 200 60 300 .212
5、 (5.39) .047 (1.19) .750 (19.05) CFR15AKC223- .022 J, K, M 200 60 300 .232 (5.89) .047 (1.19) .750 (19.05) CFR15AKC273- .027 J, K, M 200 60 300 .251 (6.38) .062 (1.57) .750 (19.05) CFR15AKC333- .033 J, K, M 200 60 300 .263 (6.68) .062 (1.57) .750 (19.05) CFR15AKC393- .039 J, K, M 200 60 300 .242 (6.
6、15) .062 (1.57) .938 (23.83) CFR15AKC473- .047 J, K, M 200 60 300 .261 (6.63) .062 (1.57) .938 (23.83) CFR15AKC563- .056 J, K, M 200 60 300 .270 (6.86) .062 (1.57) .938 (23.83) CFR15AKC683- .068 J, K, M 200 60 300 .297 (7.54) .062 (1.57) .938 (23.83) CFR15AKC823- .082 J, K, M 200 40 300 .259 (6.58)
7、.062 (1.57) 1.250 (31.75) CFR15AKC104- .10 J, K, M 200 40 300 .284 (7.21) .062 (1.57) 1.250 (31.75) CFR15AKC124- .12 J, K, M 200 40 300 .310 (7.87) .062 (1.57) 1.250 (31.75) CFR15AKC154- .15 J, K, M 200 40 300 .345 (8.76) .062 (1.57) 1.250 (31.75) CFR15AKC184- .18 J, K, M 200 40 300 .377 (9.58) .062
8、 (1.57) 1.250 (31.75) CFR15AKC224- .22 J, K, M 200 40 300 .416 (10.57) .062 (1.57) 1.250 (31.75) CFR15AKC274- .27 J, K, M 200 40 300 .389 (9.88) .062 (1.57) 1.688 (42.88) CFR15AKC334- .33 J, K, M 200 40 300 .427 (10.85) .062 (1.57) 1.688 (42.88) CFR15AKC394- .39 J, K, M 200 40 300 .462 (11.74) .062
9、(1.57) 1.688 (42.88) CFR15AKC474- .47 J, K, M 200 40 300 .501 (12.73) .093 (2.36) 1.688 (42.88) CFR15AKC564- .56 J, K, M 200 40 300 .635 (16.13) .093 (2.36) 1.688 (42.88) CFR15AKC684- .68 J, K, M 200 40 300 .706 (17.93) .093 (2.36) 1.688 (42.88) CFR15AKC324- .82 J, K, M 200 40 300 .675 (17.15) .093
10、(2.36) 2.063 (52.40) CFR15AKC105- 1.00 J, K, M 200 40 300 .748 (19.00) .093 (2.36) 2.063 (52.40) CFR15AKE682- .0068 J, K, M 400 95 400 .217 (5.51) .047 (1.19) .750 (19.05) CFR15AKE822- .0082 J, K, M 400 95 400 .230 (5.84) .047 (1.19) .750 (19.05) CFR15AKE103- .01 J, K, M 400 95 400 .232 (5.89) .047
11、(1.19) .750 (19.05) CFR15AKE123- .012 J, K, M 400 95 400 .250 (6.35) .047 (1.19) .750 (19.05) CFR15AKE153- .015 J, K, M 400 95 400 .260 (6.60) .062 (1.57) .750 (19.05) CFR15AKE183- .018 J, K, M 400 95 400 .243 (6.17) .047 (1.19) .938 (23.83) CFR15AKE223- .022 J, K, M 400 95 400 .262 (6.66) .062 (1.5
12、7) .938 (23.83) CFR15AKE273- .027 J, K, M 400 95 400 .275 (6.98) .062 (1.57) .938 (23.83) CFR15AKE333- .033 J, K, M 400 95 400 .301 (7.65) .062 (1.57) .938 (23.83) CFR15AKE393- .039 J, K, M 400 50 400 .261 (6.63) .062 (1.57) 1.250 (31.75) CFR15AKE473- .047 J, K, M 400 50 400 .284 (7.21) .062 (1.57)
13、1.250 (31.75) CFR15AKE563- .056 J, K, M 400 50 400 .307 (7.80) .062 (1.57) 1.250 (31.75) CFR15AKE683- .068 J, K, M 400 50 400 .336 (8.53) .062 (1.57) 1.250 (31.75) CFR15AKE823- .082 J, K, M 400 50 400 .367 (9.32) .062 (1.57) 1.250 (31.75) CFR15AKE104- .1 J, K, M 400 50 400 .404 (10.26) .062 (1.57) 1
14、.250 (31.75) CFR15AKE124- .12 J, K, M 400 50 400 .441 (11.20) .062 (1.57) 1.250 (31.75) CFR15AKE154- .15 J, K, M 400 50 400 .491 (12.47) .062 (1.57) 1.250 (31.75) CFR15AKE184- .18 J, K, M 400 50 400 .456 (11.58) .062 (1.57) 1.688 (42.88) CFR15AKE224- .22 J, K, M 400 50 400 .500 (12.73) .062 (1.57) 1
15、.688 (42.88) CFR15AKE274- .27 J, K, M 400 50 400 .533 (13.54) .093 (2.36) 1.688 (42.88) See footnote at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-55514/10E 3 TABLE I. Capacitor characteristics - Continued. Characteristic K
16、, style CFR15 capacitors Part or identifying number (PIN) 1/ Capacitance (F) Capacitance tolerance available dc Voltage at +105C (volts) Voltage at +85C at 20 kHz (volts) dv/dt volt/s (volts) D L .062 CFR15AKE334- .33 J, K, M 400 50 400 .591 (15.01) .093 (2.36) 1.688 (42.88) CFR15AKE394- .39 J, K, M
17、 400 50 400 .643 (16.33) .093 (2.36) 1.688 (42.88) CFR15AKE474- .47 J, K, M 400 50 400 .708 (17.98) .093 (2.36) 1.688 (42.88) CFR15AKE564- .56 J, K, M 400 50 400 .749 (19.02) .093 (2.36) 2.438 (61.93) CFR15AKE684- .68 J, K, M 400 50 400 .818 (20.78) .093 (2.36) 2.438 (61.93) CFR15AKE824- .82 J, K, M
18、 400 50 400 .901 (22.89) .093 (2.36) 2.438 (61.93) CFR15AKE105- 1.00 J, K, M 400 50 400 .998 (25.35) .093 (2.36) 2.438 (61.93) CFR15AKF102- .001 J, K, M 600 110 500 .243 (6.17) .047 (1.19) .750 (19.05) CFR15AKF122- .0012 J, K, M 600 110 500 .253 (6.53) .062 (1.57) .750 (19.05) CFR15AKF152- .0015 J,
19、K, M 600 110 500 .261 (6.63) .062 (1.57) .750 (19.05) CFR15AKF182- .0018 J, K, M 600 110 500 .299 (7.60) .062 (1.57) .750 (19.05) CFR15AKF222- .0022 J, K, M 600 110 500 .257 (6.53) .062 (1.57) .750 (19.05) CFR15AKF272- .0027 J, K, M 600 110 500 .265 (6.73) .062 (1.57) .750 (19.05) CFR15AKF332- .0033
20、 J, K, M 600 110 500 .240 (6.10) .047 (1.19) .750 (19.05) CFR15AKF392- .0039 J, K, M 600 110 500 .253 (6.43) .062 (1.57) .750 (19.05) CFR15AKF472- .0047 J, K, M 600 110 500 .258 (6.55) .062 (1.57) .750 (19.05) CFR15AKF562- .0056 J, K, M 600 110 500 .265 (6.73) .062 (1.57) .750 (19.05) CFR15AKF682- .
21、0068 J, K, M 600 110 500 .268 (6.81) .062 (1.57) .750 (19.05) CFR15AKF822- .0082 J, K, M 600 110 500 .257 (6.53) .062 (1.57) .938 (23.83) CFR15AKF103- .01 J, K, M 600 110 500 .267 (6.78) .062 (1.57) .938 (23.83) CFR15AKF123- .012 J, K, M 600 110 500 .290 (7.37) .062 (1.57) .938 (23.83) CFR15AKF153-
22、.015 J, K, M 600 110 500 .320 (8.13) .062 (1.57) .938 (23.83) CFR15AKF183- .018 J, K, M 600 110 500 .347 (8.81) .062 (1.57) .938 (23.83) CFR15AKF223- .022 J, K, M 600 110 500 .381 (9.68) .062 (1.57) .938 (23.83) CFR15AKF273- .027 J, K, M 600 110 500 .328 (8.33) .062 (1.57) 1.250 (31.75) CFR15AKF333-
23、 .033 J, K, M 600 110 500 .358 (9.09) .062 (1.57) 1.250 (31.75) CFR15AKF393- .039 J, K, M 600 65 500 .387 (9.83) .062 (1.57) 1.250 (31.75) CFR15AKF473- .047 J, K, M 600 65 500 .421 (10.69) .062 (1.57) 1.250 (31.75) CFR15AKF563- .056 J, K, M 600 65 500 .457 (11.61) .062 (1.57) 1.250 (31.75) CFR15AKF6
24、83- .068 J, K, M 600 65 500 .501 (12.73) .093 (2.36) 1.250 (31.75) CFR15AKF823- .082 J, K, M 600 65 500 .516 (13.11) .093 (2.36) 1.250 (31.75) CFR15AKF104- .1 J, K, M 600 65 500 .571 (14.50) .093 (2.36) 1.250 (31.75) CFR15AKF124- .12 J, K, M 600 65 500 .501 (12.73) .093 (2.36) 1.688 (42.88) CFR15AKF
25、154- .15 J, K, M 600 65 500 .559 (14.20) .093 (2.36) 1.688 (42.88) CFR15AKF184- .18 J, K, M 600 65 500 .613 (15.57) .093 (2.36) 1.688 (42.88) CFR15AKF224- .22 J, K, M 600 65 500 .677 (17.20) .093 (2.36) 1.688 (42.88) CFR15AKF274- .27 J, K, M 600 60 500 .706 (17.93) .093 (2.36) 2.063 (52.40) CFR15AKF
26、334- .33 J, K, M 600 60 500 .783 (19.89) .093 (2.36) 2.063 (52.40) CFR15AKF394- .39 J, K, M 600 60 500 .854 (21.69) .093 (2.36) 2.063 (52.40) CFR15AKF474- .47 J, K, M 600 60 500 .939 (23.85) .093 (2.36) 2.063 (52.40) CFR15AKF564- .56 J, K, M 600 60 500 .908 (23.06) .093 (2.36) 2.438 (61.93) CFR15AKF
27、684- .68 J, K, M 600 60 500 1.003 (25.48) .093 (2.36) 2.438 (61.93) CFR15AKF824- .82 J, K, M 600 60 500 1.005 (28.07) .093 (2.36) 2.438 (61.93) CFR15AKF105- 1.00 J, K, M 600 60 500 1.223 (31.06) .093 (2.36) 2.438 (61.93) See footnote at end of table. Provided by IHSNot for ResaleNo reproduction or n
28、etworking permitted without license from IHS-,-,-MIL-PRF-55514/10E 4 TABLE I. Capacitor characteristics- Continued. Characteristic K, style CFR15 capacitors Part or identifying number (PIN) 1/ Capacitance (F) Capacitance tolerance available dc Voltage at +105C (volts) Voltage at +85C at 20 kHz (volt
29、s) dv/dt volt/s (volts) D L .062 CFR15AKL562- .0056 J, K, M 800 405 600 .201 (5.10) .047 (1.19) 1.250 (31.75) CFR15AKL682- .0068 J, K, M 800 405 600 .217 (5.51) .047 (1.19) 1.250 (31.75) CFR15AKL822- .0082 J, K, M 800 405 600 .236 (5.99) .047 (1.19) 1.250 (31.75) CFR15AKL103- .01 J, K, M 800 405 600
30、 .251 (6.38) .062 (1.57) 1.250 (31.75) CFR15AKL123- .012 J, K, M 800 405 600 .264 (6.71) .062 (1.57) 1.250 (31.75) CFR15AKL153- .015 J, K, M 800 405 600 .294 (7.47) .062 (1.57) 1.250 (31.75) CFR15AKL183- .018 J, K, M 800 405 600 .321 (8.15) .062 (1.57) 1.250 (31.75) CFR15AKL223- .022 J, K, M 800 405
31、 600 .354 (8.99) .062 (1.57) 1.250 (31.75) CFR15AKL273- .027 J, K, M 800 405 600 .392 (9.96) .062 (1.57) 1.250 (31.75) CFR15AKL333- .033 J, K, M 800 405 600 .433 (11.00) .062 (1.57) 1.250 (31.75) CFR15AKL393- .039 J, K, M 800 140 600 .380 (9.65) .062 (1.57) 1.688 (42.88) CFR15AKL473- .047 J, K, M 80
32、0 140 600 .414 (10.51) .062 (1.57) 1.688 (42.88) CFR15AKL563- .056 J, K, M 800 140 600 .451 (11.46) .062 (1.57) 1.688 (42.88) CFR15AKL683- .068 J, K, M 800 140 600 .501 (12.73) .093 (2.36) 1.688 (42.88) CFR15AKL823- .082 J, K, M 800 140 600 .523 (13.28) .093 (2.36) 1.688 (42.88) CFR15AKL104- .1 J, K
33、, M 800 140 600 .579 (14.71) .093 (2.36) 1.688 (42.88) CFR15AKL124- .12 J, K, M 800 85 600 .582 (14.78) .093 (2.36) 2.063 (52.40) CFR15AKL154- .15 J, K, M 800 85 600 .652 (16.56) .093 (2.36) 2.063 (52.40) CFR15AKL184- .18 J, K, M 800 85 600 .716 (18.19) .093 (2.36) 2.063 (52.40) CFR15AKL224- .22 J,
34、K, M 800 85 600 .793 (20.14) .093 (2.36) 2.063 (52.40) CFR15AKL274- .27 J, K, M 800 85 600 .779 (19.79) .093 (2.36) 2.438 (61.93) CFR15AKL334- .33 J, K, M 800 85 600 .863 (21.42) .093 (2.36) 2.438 (61.93) CFR15AKL394- .39 J, K, M 800 85 600 .940 (23.88) .093 (2.36) 2.438 (61.93) CFR15AKL474- .47 J,
35、K, M 800 85 600 1.034 (26.26) .093 (2.36) 2.438 (61.93) CFR15AKL564- .56 J, K, M 800 85 600 1.131 (28.73) .093 (2.36) 2.438 (61.93) 1/ The complete PIN will include additional symbols to indicate capacitance tolerance and product level (C, M, P, R, and S). REQUIREMENTS: Design and construction: Dime
36、nsions and configuration: See figure 1 and table I. Case: Non-hermetic. Dielectric: Normally polypropylene, foil. Capacitance (cap.) value: See table I. Cap. Tolerance: See table I. Rated voltage: See table I. dv/dt: See table I. Operating temperature range: -55C to +105C for dc operation. Provided
37、by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-55514/10E 5 Product level: Non-established reliability - C; Established reliability - M, P, R or S. Preconditioning: Not applicable. Burn-in: In accordance with MIL-PRF-55514 except for the following con
38、ditions: a. DC burn-in voltage shall be 140 percent of the dc rated voltage applied for 48 hours minimum at +105C, +4C, -0C. b. AC burn-in: Not applicable. Dielectric withstanding voltage (DWV): In accordance with MIL-PRF-55514, except charge time 2 minutes maximum at 200 percent rated dc voltage. I
39、nsulation resistance: In accordance with MIL-PRF-55514, except test voltage to be 100 V dc. Dissipation factor (DF): Not more than 0.1 percent when measured in accordance with MIL-PRF-55514. Low temperature conditioning and capacitance change with temperature: In accordance with MIL-PRF-55514. Resis
40、tance to soldering heat: Method 210 of MIL-STD-202, condition B. Cap: Maximum of 0.25 percent. Life (at +105C): In accordance with MIL-PRF-55514. Accelerated condition: 140 percent of 105C rated voltage. Rated condition: 100 percent of +105C rated voltage. IR (at +25C terminal to terminal): Not less
41、 than 50.0 percent of initial requirement. Cap (at +25C): Maximum of 2.0 percent. DF (at +25C) after life: .12 percent maximum. AC conditioning: In accordance with MIL-PRF-55514. AC conditioning for qualification shall be at the rated ac voltage at +85C and 20 kHz shall be run on test samples in acc
42、ordance with table II herein at 12-month intervals. TABLE II. AC conditioning test samples. 1/ Each test sample shall contain at least one capacitor of the highest and lowest capacitance value of each voltage group manufactured during the 12-month period. DC rated voltage (volts) Sample size Cap ran
43、ge for selection of sample 1/ (F) 200 400 600 800 24 24 24 24 .012 to 1.0 .0068 to 1.0 .001 to 1.0 .0056 to 0.56 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-55514/10E 6 Changes from previous issue: The margins of this specification are ma
44、rked with vertical lines to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document ba
45、sed on the entire content irrespective of the marginal notations and relationship to the last previous issue. Referenced documents. In addition to MIL-PRF-55514, this document references MIL-STD-202. Custodians: Preparing activity: Army - CR Army - CR Navy - EC Air Force - 85 Agent: DLA - CC DLA - C
46、C Review activities: (Project 5910-2013-023) Navy - AS, MC, OS Air Force - 19, 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
