1、MIL-R-45777 (LI LO 7777706 0307777 2 s-3m3 MIL-R-45979 (AR) AMENDENT 1 18 August 1986 MILITARY SPECIFICATION RIFLE, 7.62MM: M14, NATIONAL MATCH This Amendment forms a part of Military Specification MIL-R-45979, dated 24 September 1976, and is approved for use within the US Army Armament Munitions an
2、d Chemical Command, and is available for use by all Departments and Agencies of the Department of Defense. PAGE 8 3.2.16.6, Delete in its entirety and substitute: “3.2.16.6 Swivels. The butt swivel shall be fastened securely to the stock by the long butt plate screw. The sling swivel assembly shall
3、be fastened securely to the stock by rivets. There shall be no relative movement of these parts.“. 3.2.19, Delete in its entirety and substitute: “3.2.19 Headspace. After proof firing, the headspace shall be 1.6330 inches minimum to 1.6360 inches maximum. Testing shall be as specified in 4.5.10.4.“.
4、 3.3.2, Delete in its entirety and substitute: “3.3.2 Trigger pull. The trigger pull shall be free of creep and shall be within the range of 4 1/2 to 4 3/4 pounds. rough movement between the time the trigger slack is taken up and the hammer is released. Testing shall be as specified in 4.5.10.5.“. C
5、reep shall be interpreted to mean any perceptible PAGE 9 3.3.5.1 and 3.3.5.2, Delete in their entirety and substitute: “3.3.5.1 The average extreme spread for three consectutive ten shot groups shall not exceed six (6) inches at a ranges of 300 meters using caliber 7.62mm M852 match ammunition.“. AM
6、SC NA 1 of 2 FSC 1005 DISTRIBU ION STATEMENT A. Approved for public release; distribution is unlimited. Licensed by Information Handling ServicesMIL-R-45777 (1) LO = 7777706 0307778 4 MIL-R-45979 (AR) AMNDMENT i PAGE 21 4.6.3 Headspace test: Delete the first sentence and substitute the following: .“
7、Rifles shall be gaged for headspace (see 4.5.10.4) after proof firing, prior to acceptance, using government approved standard test measuring equipment.“ PAGE 22 4.6.7 Function and targeting and accuracy firing test: Delete the first sentence and substitute the following: “Testing of rifles for func
8、tioning and targeting and accuracy at a range of 300 meters (see 4.5.10.6) shall be accomplished with the rifles held in a targeting jack simulating shoulder firing and conforming to drawing F6511841.“ Custodian: Army-AR Preparing activity: (Project 1005-A655) Army-AR 2 Licensed by Information Handling Services
