1、MIL-S-70536 (2) W 9999906 Lb44bb3 53T W I INCH-POUND I MIL-S-70536 (AR) . AMENDMENT 2 12 Februar-y 1993 SUPERSEDING AMENDMENT 1 O1 July 1990 MILITARY SPECIFICATION SIMULATOR, TARGET KILL, PARTS FOR AND LOADING, ASSEMBLING AND PACKING This amendment forms a part of military specification MIL-S-70536(
2、AR) dated 5 May 1986 and is approved for use by the U.S. Army Armament, Munitions and Chemical Command, and is available for use by all Departments and Agencies of the Department of Defense. PAGE 2 2 .l .l other Government documents, drawings and publications. Add the following drawing to “Product a
3、nd Packaging Drawings“: “8837375 - ARRADCOM Environmental Testing Criteria for OCONUS Shipping Containers,“ PAGE 3 3.3.1 Visual signature. Delete a(1-5 knots)“ and substitute (0-5 knots) relative wind indication. a 3a3.2 Delete and substitute: 3.3.2 Functioning, The target kill sirnulator shall fire
4、 when subjected to a power source of 12 volts, current limited to 1.2 amps. Add the following paragraphs: “3.4.6 Five foot drop test. The simulator shall not detonate nor split but remain operable when tested as specified - in 4.5.4.78“ “3.5 Packaging tests. The packaged simulators shall not functio
5、n when tested as epecified in 4.5.5.“ 3a5 First article inspection. Change “3.5“ to “3.6“. AMSC N/A 1 of 14 FSC 1370 P-. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-S-7053b (2) m 99999Ob
6、 L844bb4 47b m MIL-S-70536 (AR) AMENDMENT 2 PAGE 4 3.6 Workmanship. Change “3.6“ to “3.7“. Add the following paragraph 3.8 “3.8 Electric match no fire test. The electric match assembly shall not fire when subjected to the applicable current specified on Dwg. 9354515. 4 . 3.1 Submission : Add to list
7、: “Spring, short Circuit, 12953395“. Delete from list: “Cap, short Circuit, 9342157“. PAGE 5 Table I Cap, Short Circuit: Delete in its entirety and substi tute: “Spring, Short Circuit (DWg. 12953395) Examination for defects 32 3.2 4.4.2.3“ PAGE 6 under Table I First article inspection, delete “Nonse
8、quential“ tests and .Sequential“ tests in their entirety and substitute - - the following: # of Para. Ref. - “Examination of Test Samples AQL Req. Para Seauential test - Leakage test Seven foot drop Transportation vibration Loose cargo Five foot drop (Note 1) Hot Cold Ambient Leak test (Note 2) Jumb
9、le Function 1 box 1 box 1 box 1 box 20 20 20 60 30 30 2 3.4.4 4.5.4.4 3.5 4.5.5.1 3 05 4.5.5.2 3.5 4.5.5.3 3.4.6 4.5.4.7 3.4.6 4.5.4.7 3.4.6 4.5.4.7 3.4.3 4.5.4.3 3.4.5 4.5.4.6 3.3 4.5.4.214.5.3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-* * * M
10、IL-S-70536 (2) 9999906 LB44665 302 MIL-S-70536 (AR) AMENDMENT 2 Delete Note 1 in its entirety and substitute the following: “1. Twenty items to be conditioned at each temperature prior to five foot drop test followed by functioning. 2. Leak tested items to be used for jumble test and ambient functio
11、ning. PAGE 8 4.4.2.1 Minor 201. Change “3.6“ to “3.7“. Add Major “105 Pull test, spring to pins 30, 0-1, 3.2, Gage“, PAGE 9 4.4.2.2 Add the following: Major 102, Outside diameter base crimp, max., 0.40%, 3.2, Gage“ Major 103, Finish missing or Improperly applied, 0.40%, 3.2, visual“ Minor 201. Chang
12、e “3.6“ to “3.7“. PAGE 10 4.4.2.3: Delete in its entirety and substitute new 4.4.2.3 included. PAGE 11 4.4-2.4 Minor 201. Change “3.6“ to “3.7“. PAGE 12 4.4.2.5 Add Major 103. “103 NO-Fire Test 50, 0-1 3.8, 4.5.6“. Minor 201: Change “3.6 to “3.7“. PAGE 13 4-4.2.6 Delete Major 102 In Its entirety. 3
13、Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-rl 8 rl E It - L JJ d i: Li d u JJ Li O c VI m e 4 Li a VI h MIL-S-70536 (2) = 999990b L844bbb 249 = r( (d dPdPdPde o000 dP *e O O000 d . aJ Provided by IHSNot for ResaleNo reproduction or networking pe
14、rmitted without license from IHS-,-,-MIL-S-70536 (AR) AMENDMENT 2 PAGE 15 4.4.2.8 Delete Majors 105 to 111 in their entirety and subs ti tu te the f o1 lowi ng : Req. Para. Ref. - # Units AQL Para. - - a Cr i ti ca 1 * 1 Jumble (Note 1) 32 0-1 3.4.5 4.5.4.6 * 2 Leakage of explosive or evidence of lo
15、ose powder on exterior of assembly - 100% 3.2 Visual Major 105 Leakage Test 1 box 0-1 3.4.4 4 -5 -4 -4 106 Leak Test (Note 1) 182 0-1 3.4.3 4.5.4.3 108 Five Foot Drop (Note 2) * 107 (Deleted from previous amendment) Hot 50 3.4.6 4.5 -4 -7, Cold 50 3.4.6 4.5.4.7, 4.4.5.1 4.4.5.2 4.4.5.1 Ambient 50 3.
16、4.6 4.5.4.7, 109 Height of Assembly, max. 0.40% 3.2 Gage extent that powder may leak 0.40% 3.2 Visual * 110 Assembly damaged to the Minor 201 Change “3.6“ to 3.7“. NOTE 1. Delete in its entirety and substitute the following: 1. Leak tested items used for Jumble test and Five foot drop test. 2. Items
17、 to be conditioned at appropriate temperatures prior to Five foot drop followed by functioning.“ PAGE 16 4a4a2.9: Minor 203: Change “3.6“ to “3.7. PAGE 17 4.4.2.10: Minor 203: Change “3.6“ to “3.7“. 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-M
18、IL-S-7053b (2) W 999990b L44bb8 OLL W MIL-S-70536 (AR) AMENDMENT 2 4.4.2-11: 4.4.2,12: 4.4,2.13: 4.4.2.14: 4.4.2-15: 4.4.2.16: * 4.4.2-17: PAGE 18 Minor 206: Change “3.6“ to “3.7“, PAGE 18A Add new page 18A included, PAGE 18B Add new page 18B included. PAGE 18C Add new page 18C included. PAGE 18D Ad
19、d newpage 18D included. PAGE 183 Add new page 18E included. PAGE 18F Add new page 18 included. PAGE 19 4.4a3.1 Moisture Content, Under Table II, delete lines 2 and 3, “Composition, Black Smoke“ and “Paper and paper products“ .in its entirety, PAGE 20 4,5,2,1 Composition, ignition, In line 3, delete
20、“Method 101.2“ and substitute “Method 101.2.1“. PAGE 21 4-5.2.2 Delete in its entirety, 4.5-3.2 Delete in its entirety and substitute: “4.5.3.2 “Functioning. The target kill simulator assembly shall function when subjected to the conditions specified in 3.3.2. Observation shall be made for complianc
21、e with the applicable requirement.“ 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-8 rl 8 rl 6 f $.( P E aJ W m a: 0 9 rl PI a, +, Q c Li a, u rl U CYN NI- c3m mm a. dpdp dP O0 In* ww wo O0 Orl e. .e .cr oa a, O c Q)L( rl rra VI CE a, Q -4 ! Provi
22、ded by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-m 1 !;1 “ NI- mm mm ea, e O0 In* wo * em O0 04 5 Q, c 4 VI Q, 5 Q, c 8 A u) Q, rl O c a Ea 4-64 S4.G Urn c Ua 0)- U0 c3 Q, Zab4 aro WO &o( Y O.E Provided by IHSNot for ResaleNo reproduction or networking per
23、mitted without license from IHS-,-,-MIL-S-7053b (2) E c E d 9 Li O u u Q) c c 8 4 c 4 n4 4 m Ncv NI- mm mm *e dpdp dp O0 dp0 * vO w* o0 .FI iu CJUI Q) O& a 4 c UV) -4 c rla “Y Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-H B U W pi cn z W U z 4 r:
24、 E O k z O U sr B H la 4 3 Q W MIL-S-7053b (2) 3 E x 5 Y 8 E f 9999906 L844b72 542 Q, Li 5 v) O rl U m 7 rl pi a u (II c Li o, u FI 4 - FI (II *do dPdP O00 O0 *w wo O00 04 . 5 0) c 4 W o 5 Q, C O z a 4 OZ SV1 rlc aca E WY ou O DILI CO ao lapi s3 rl (III U o Y, 3 al o o O c h c E c - U .C c - 3 cc) c
25、x) C. 3 c e Y z O LL U lO( 18D) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-z O m & co z H wl V z R E er: H 2 8 V sr m CI a R 3 CY E t MIL-S-7053b (2) 99999Ob 1844673 lt89 al U4 CO als XC o)P -3 90 Sb JJC U u O Urn rp hal dLi Cil ll(18E) o u cn o
26、 Y O C *r c E o c - U .C c 3 c? a) E 3 c L c . O o .i- O I& CI o c - s Y, c H o o 4 o o c a M 6 o LL c - 4 ci Y # c O LL P Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-, 8 4 O rr Li O sl Li a $.i E Y 4 n MIL-S-70536 (2) 0b L844b74 315 4 RI 3 u) sl
27、 hl m a, O O 4 aa cc O0 zz 12(18F) ! Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NIL-S-70536 (2) D 9999906 1844675 251 MIL-S-70536 (AR) AMENDMENT 2 PAGE 22 4-5.4.3 Leak test, Delete in its entirety and substitute the following : “4.5.4.3 Leak tes
28、t, The simulators shall be tested for leakage by submersing them in water (at 70 + 5OF) contained in a vacuum chamber. A vacuum differential of at least 6 inches of mercury shall be drawn and held for 30 seconds while observing for air bubbles, A steady stream or recurring stream from any surface or
29、 seam shall constitute a failure. The cartridges shall be wiped dry prior to functioning, (Non-Destructive Test)“. Add the following paragraphs: “4.5.4.7 Five foot drop test, The simulators shall be tested in accordance with MIL-STD-331, Test 111 -1, Procedure 2, 1.5 Meter Drop test. The simulators
30、shall be dropped at each of the five orientations as required in the procedure after temperature conditioning in accordance with 4.5.4.1 and 4D5.4.2 The simulators shall be functioned in accordance with 4.5.3 following the drop, Observations shall be made for compliance with applicable requirements
31、. (Destructive Test) . “4.5.5 Packaging tests. (First article only). A total of one(1) fully packed wood box containing 60 simulators shall be subjected to tests specified in 4.5.5.1, 4.5.5.2 and 4.5.5-3 at ambient temperature. II “4.5.5.1 Seven foot drop test, The wood box shall be tested in accord
32、ance with ARDEC drawing 8837375 test number 13, with the exception that the box be dropped in only one (1) orientation, bottom down. Observations shall be made for compliance with applicable requirements. a “4 .5.5.2 Transportation vibration, The wood box shall be subjected to secured cargo vibratio
33、n as specified in MIL-STD-810, Method 514.3 Category 1 Figures 514.3-4 through 514.3-6. Observations shall be made for compliance with applicable requirements, (I “4.5.5.3 Loose cargo vibration. The wood box shall be tested in accordance with ARDEC drawing 8837375 test number 14, Observations shall
34、be made for compliance with applicable requirements . 13 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-S-70536 (2) D Ob L844b7b L8 D MIL-S-70536 (AR) AMENDMENT 2 “4.5.6 Electric match no fire test, The electric match assembly shall b e tested f
35、or the no-fire condition by applying the current specified on Dwg, 9354515, Observation shall be made for compliance with applicable requirements. (Non-destructive test)“, The margins of this amendment are marked with an asterisk or vertical lines to indicate where changes (additions, modifications,
36、 corrections, deletions) from the previous amendment were made, This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous amendment. Cu s to di a n Army-AR Preparing activity Army-AR (Project 1370-A 34 5) 14 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
