1、INCH-POUNDMIL-STD-40076 (MI)17 December 1997SUPERSEDINGMIL-P-45213E (MI)8 August 1989DEPARTMENT OF DEFENSESTANDARD PRACTICEPRESERVATION AND PACKING OF ROCKET ANDMISSILE SYSTEMS EQUIPMENT FOR SHIPMENTAMSC N/A AREA-PACKDISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.Pr
2、ovided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-iiFOREWORD1. This standard is approved for use by the U.S. Army Aviation and Missile Command,Department of the Army, and is available for use by all Departments and Agencies of theDepartment of Defense.2.
3、 This standard details the general requirements for preservation, packing, and loading forshipment of rocket and missile systems ground support equipment and hazardous items forworldwide movement and storage.3. Beneficial comments (recommendations, additions, deletions) and any pertinent datawhich m
4、ay be of use in improving this document should be addressed to: Commander, U.S.Army Aviation and Missile Command, ATTN: AMSAM-RD-SE-TD-ST, Redstone Arsenal, AL35898-5000 by using the Standardization Document Improvement Proposal (DD Form 1426) atthe end of this document, or by letter.Provided by IHS
5、Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-40076 (MI)iiiCONTENTSPARAGRAPH PAGEFOREWORD ii1. SCOPE1.1 Scope.12. APPLICABLE DOCUMENTS2.1 General12.2 Government documents 12.2.1 Specifications, standards, and handbooks.12.3 Non-Government publications22.4
6、 Order of preference .23. DEFINITIONS3.1 Chemical agent resistant coating (CARC)23.2 Camouflage pattern painting (CPP) 23.3 Desiccant.33.4 Drawdown.33.5 Exterior pack.33.6 Hazardous materials33.7 Intermediate pack33.8 Levels of protection 33.8.1 Level A33.8.2 Level B33.9 Marking.33.10 Packaging33.11
7、 Packing33.12 Preservation.33.13 Skid base .43.14 Static load43.15 Unit pack.44. GENERAL REQUIREMENTS4.1 General requirements 44.1.1 Class I Ozone Depleting Chemicals (ODCs)44.1.2 Recycled, recovered, or environmentally preferable materials.44.2 Packaging data sheets .44.3 Packaging44.4 Preparation
8、prior to processing .44.5 Reprocessing of equipment with controlled humidity 4Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-40076 (MI)ivCONTENTSPARAGRAPH PAGE4.6 Dehumidified equipment 54.7 CARC/CPP .54.8 Tags.54.9 Sealing tape.54.10 Barrie
9、r material .54.11 Blocking, bracing, anchoring, cushioning, and waterproofing.54.12 Palletization 54.13 Containers .65. DETAILED REQUIREMENTS5.1 Preservation.65.1.1 Level A65.1.1.1 Cleaning 65.1.1.2 Preservative applications 65.1.1.3 Disassembled parts65.1.1.4 Shelters and van bodies.65.1.1.4.1 Inte
10、rior.65.1.1.4.2 Exterior .75.1.1.5 Wheeled and tracked vehicles.75.1.1.6 Equipment requiring controlled ventilation 75.1.1.7 Basic issue items.75.1.1.8 Engines85.1.1.9 Air compressors 85.1.1.10 Electric cables .85.1.1.11 Other equipment85.1.1.12 Hazardous items85.1.2 Level B85.2 Packing85.2.1 Level
11、A85.2.1.1 Shelters85.2.1.2 Engines85.2.1.3 Air compressors 85.2.1.4 Electric cables .95.2.1.5 Other equipment95.2.1.6 Hazardous items95.2.1.7 Container Construction .95.2.2 Level B95.2.2.1 Shelters9Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-
12、STD-40076 (MI)vCONTENTSPARAGRAPH PAGE5.2.2.2 Engines95.2.2.3 Air compressors 95.2.2.4 Electric cables .95.2.2.5 Other equipment95.2.2.6 Performance oriented packing (POP) for hazardous materials.95.2.2.7 Containers .105.3 Marking.105.3.1 Markings for vehicle carried equipment .105.3.2 Markings for s
13、helters and van bodies .105.3.3 Hazardous item markings .105.3.4 Missile and rocket ammunition containers .105.3.4.1 General105.3.4.2 Required markings105.4 Loading .145.4.1 Rail shipment 145.4.2 Highway shipment 145.4.3 Aircraft shipment 146. NOTES6.1 Intended use 156.2 Issue of DODISS.156.3 Subjec
14、t term (keyword) listing156.4 Metric equivalents.15FIGURE1. Marking of cylindrical containers.122. Marking of rectangular containers 133. Marking of drums .14TABLEA-I Desiccant requirements for free breather system 17A-II Water vapor computation for obtaining two grains 18Provided by IHSNot for Resa
15、leNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-40076 (MI)viCONTENTSAPPENDIXA INSTALLATION OF A STATIC-FREE BREATHER DEHUMIDIFICATION SYSTEM.16B PROCEDURAL REQUIREMENTS FOR THE PRESERVATION AND PACKAGING OF REPAIR PARTS AND SPARE PARTS20CONCLUDING MATERIAL .29Provided
16、by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-40076 (MI)11. SCOPE1.1 Scope. This standard establishes the general requirements for preservation, packing, andloading for shipment of rocket and missile systems ground support equipment and hazardousite
17、ms for worldwide movement and storage.2. APPLICABLE DOCUMENTS2.1 General. The documents listed in this section are specified in sections 3, 4, and 5 of thisstandard. This section does not include documents cited in other sections of this standard orrecommended for additional information or as exampl
18、es. While every effort has been made toensure the completeness of this list, document users are cautioned that they must meet allspecified requirements cited in sections 3, 4, and 5 of this standard, whether or not they arelisted.2.2 Government documents.2.2.1 Specifications, standards, and handbook
19、s. The following standards and handbooksform a part of this document to the extent specified herein. Unless otherwise specified, the issuesof these documents are those listed in the issue of the Department of Defense Index ofSpecifications and Standards (DODISS) and supplement thereto, cited in the
20、solicitation (see6.2).STANDARDSFEDERALFED-STD-101 Test Procedures for Packaging MaterialsFED-STD-191 Textile Test MethodsMILITARYMIL-STD-129 Standard Practice for Military MarkingMIL-STD-709 Standard Practice for Ammunition Color CodingMIL-STD-2073 Standard Practice for Military Packaging HANDBOOKSM
21、IL-HDBK-129 Military MarkingMIL-HDBK-774 Palletized Unit Loads(Unless otherwise specified, copies of the above federal and military specifications,standards, and handbooks are available from the Department of Defense Single Stock Point(DODSSP), Standardization Documents Order Desk, 700 Robbins Avenu
22、e, Bldg. 4D,Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-40076 (MI)2Philadelphia, PA 19111-5094.)2.3. Non-Government publications. The following documents form a part of this documentto the extent specified herein. Unless otherwise specifi
23、ed, the issue of the documents which areDoD adopted are those listed in the issue of the DODISS cited in the solicitation. Unlessotherwise specified, the issue of a document not listed in the DODISS is the issue of thedocument cited in the solicitation (see 6.2).AMERICAN SOCIETY FOR TESTING AND MATE
24、RIALS (ASTM)ASTM D 3330 Standard Methods for Peel Adhesion of Pressure Sensitive Tape at 180 Degree AnglesASTM D3816 Standard Test Method for Water Penetration Rate of Pressure Sensitive TapeASTM D 3654 Standard Test Method for Holding Power of Pressure Sensitive TapeASTM D 3759 Standard Test Method
25、 for Tensile Strength and Elongation of Pressure Sensitive Tape(Application for copies should be addressed to the American Society for Testing andMaterials, 1916 Race Street, Philadelphia, PA 19103-1187.)TECHNICAL ASSOCIATION OF PULP AND PAPER INDUSTRY (TAPPI)TAPPI T 414 Internal Tearing ResistanceT
26、APPI T 456 Wet Tensile Breaking Strength of Paper Board(Application for copies should be addressed to the Technical Association of Pulp and PaperIndustry, 15 Technology South Parkway, Norcross, GA 30092)2.4 Order of precedence. In the event of a conflict between the text of this document and therefe
27、rences cited herein, the text of this document takes precedence. Nothing in this document,however, supersedes applicable laws and regulations unless a specific exemption has beenobtained.3. DEFINITIONS3.1 Camouflage pattern painting (CPP). Camouflage painting for combat support equip-ment. Any combi
28、nation of colors that will render an item “invisible” to an enemy by blendingwith the environment3.2 Chemical agent resistant coating (CARC). Coatings that are approved for combatequipment, combat support equipment, tactical wheeled vehicles, aircraft, and essential groundsupport equipment.3.3 Desic
29、cant. A soluble or insoluble chemical substance that has such a great affinity forProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-40076 (MI)3water that it will withdraw water from a great many fluid materials. A bagged, chemically inert,dehyd
30、rating agent.3.4 Drawdown. Reduction of the moisture content of air by withdrawing water throughdehumidification or desiccant use.3.5 Exterior pack. A container, bundle, or assembly which is sufficient by reason ofmaterial, design, and construction to protect material during shipment and storage. Th
31、is can bethe unit pack or a container with any combination of unit or intermediate packs.3.6 Hazardous materials. A material, substance, or waste which has been determined by theSecretary of Transportation to be capable of posing an unreasonable risk to health, safety, andproperty when transported i
32、n commerce and which has been so designated.3.7 Intermediate pack. A wrap, box, or bundle which contains two or more unit packs ofidentical items.3.8 Levels of protection. The levels of protection which apply equally to preservation andpacking are detailed in the following paragraphs.3.8.1 Level A.
33、Level A designates the maximum level of preservation and packing requiredto meet the most severe worldwide shipping, handling, and storage conditions. Preservation andpacking will be designed to protect material against direct exposure to extremes of climate,terrain, operational, and transportation
34、environments without protection other than that providedby the pack.3.8.2 Level B. Level B designates the intermediate level of preservation or packing requiredfor the protection of materiel against physical damage and deterioration under anticipatedfavorable conditions during worldwide shipping, ha
35、ndling, and storage. Preservation andpacking will be capable of protecting material not directly exposed to extremes of climate,terrain, and operational transportation environments.3.9 Marking. Application of numbers, letters, labels, tags, symbols, or colors for handling oridentification during shi
36、pment and storage.3.10 Packaging. The processes and procedures used to protect material from deterioration,damage, or both, and includes cleaning, drying, preserving, packaging, marking, and unitization.3.11 Packing. Assembling of items into a unit, intermediate, or exterior pack with necessaryblock
37、ing, bracing, cushioning, weatherproofing, reinforcement, and marking.3.12 Preservation. Application of protective measures, including cleaning, drying,preservative materials, barrier materials, cushioning, and containers when necessary.3.13 Skid base. A wood or metal platform support on wheels, leg
38、s, or runners used forhandling and moving material.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-40076 (MI)43.14 Static load. A nonvarying load; exerted by a mass at rest.3.15 Unit pack. A first tie, wrap, or container applied to a single i
39、tem or a quantity thereof,or to a group of items of a single stock number, preserved or unpreserved, which constitutes acomplete or identifiable package. The unit pack shall be overpacked for shipment unless the unitcontainer is specifically designed to provide shipping protection.4. GENERAL REQUIRE
40、MENTS4.1 General requirements.4.1.1 Class I Ozone Depleting Chemicals (ODCs). Use of Class I Ozone DepletingChemicals (ODCs) shall be avoided.4.1.2 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, orenvironmentally preferable materials should be used to the maximum
41、extent possible providedthat the material meets or exceeds the operational and maintenance requirements, and promoteseconomically advantageous life cycle costs.4.2 Packaging data sheets. When packaging data sheets are available for specified items ofequipment, the requirements of this standard shall
42、 apply to the extent referenced therein. Pro-cessing instructions supplemental or additional to the requirements of this standard may also beincluded in packaging data sheets.4.3 Packaging. Packaging shall provide the maximum practical protection, either level A orB, as designated, by means of the s
43、pecified processing, against corrosion, deterioration, orphysical functional damage during shipment and storage. Tape, or method of sealing, shall beuniformly applied.4.4 Preparation prior to processing. Repairs and tests shall have been completed prior toprocessing. Associated equipment shall be in
44、stalled and all adjustments shall be made to permitthe item to be operated or shipped. Any painted surface (interior or exterior) that has defective ordamaged paint film shall be repainted with materials of the same type and quality as the originalapplication. Repainted spots shall blend inconspicuo
45、usly with surrounding areas.4.5 Reprocessing of equipment with controlled humidity. Shelters and van bodies processedfor controlled humidity shall be reprocessed when the humidity indicator shows a relative humid-ity (RH) of 30 percent or more within 24 hours. Readings shall be documented and enclos
46、edwith the record forms secured to the exterior of processed unit(s) (see 5.5).4.6 Dehumidified equipment. Free-breather systems, desiccant charges, and humidityindicators shall be properly installed and all sealing shall be adequate to ensure protection fromdamage due to corrosion.Provided by IHSNo
47、t for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-40076 (MI)54.7 CARC/CPP. Chemical agent resistant coatings (CARC) shall be used for all combatequipment, combat support equipment, tactical wheeled vehicles, aircraft, and essential groundsupport equipment. Thre
48、e color camouflage pattern painting (CPP) shall be used when patternsare available. When patterns are not available, base coats of polyurethane paint in colors thatcontribute to camouflage shall be applied.4.8 Tags. Tags required for equipment processing shall be made of paper and not metalbound; ho
49、wever, tags used in controlled humidity areas may be metal bound.4.9 Sealing tape. When required, sealing tape shall perform within a temperature range of-54 to 52C (Celsius) -65 to 125 F (Fahrenheit) and shall not require any preparation prior toapplication. The tape should also display the following:a. Tensile strength (lbs/in width) 10 minimumb. Elongation (percentage) 3
