1、A MIL-T-1432W 23 m 7977906 OL79L2 5 = .- L-4 2-15 MI L-T- 14 38 2 W 2 March 1988 SUPERS EDING MIL-T-14382V 22 March 1985 Beneffat ions , addit ions , delet ions) and any pertinent. data vhlsh may be of use in improving thls document should be addressed to: US Army Tank-Automot ive Command, ATTN: MIS
2、TA-UED, blarren, Pl1 48397-5000, by using the self-addressed Standardization Document Improvement Proposal (DD FOKm 1426) appearing ad the end of, MILITARY SPECIFICATION TRUCKS, AMBULANCE: DIESEL OR GASOLINE ENGINE DRIVEN, 10,000 POUNDS GVW, 4x4, specification are commercial items which shall be war
3、ranted by the manufacturer as specified in acquisition do curnent s . 2. APPLICjBLE DOCUMENTS 2.1 Govertirnent documents. - 2.1.1 Specifications and standards. The following specifications and standards form a part of this specification to the extent specified - herein. Unless otherwise specifled, t
4、he issues of these documents shall be those listed in that Bssue of the Department of Defense Index of SpecifBcations and Standards (DoDISS), and supplement thereto, clted in the SQl%Cata%gOn. SPECIFICATIONS FEDERAL $1-B-131 - Battery, Storage: Vehicular, Ignition, zz-T-381. - Tires Prieumat fe Vehi
5、cular (Highway) o Lighting and St art ing o MlSC NIA IFSC-2 3 101 DISTRIBUTION STATEMENT A. Approved for publlc release; distribution is unlimited o Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-L4382W 23 W 777770b 0387733 7 MILITARY MIL-P-5
6、14 MIL-B-46176 STANDARDS FEDERAL FED-STD-237 FEW STD- 59 5 MILITARY MIL-STD-1223 MS3112 MS3116 MS51317 iS5 13 35 DRAWINGS MILITARY 11658584 MIL-T-14382W - Plates, Identification, Instruction and . Marking, Blank. - Brake Fluid, Silicone, Automotive Ai1 Weather, Operational and Preservative. - Rustpr
7、oofing of Commercial (Nontactical) - Colors. Vehicles. - Nontactical Wheeled Vehicles Treatment, Painting, Identification Marking and Data Plate Standards. - Connectors, Receptacle, Electric. - Connectors, Plug, Electric. - Light, Warning, Vehicular, Rotating, D.C. - Pintle Assembly, Towing. - Strap
8、 Assembly. 2.1.2 Other Government documents. The following other Government documents form a part of this specification to the extent specified herein. Unless otherwise specified, the issues shall be those in effect on the date of the solicitation. DEPARTMENT OF TRANSPORTATION (DOT) Federal Motor Ca
9、rrier Safety Regulations. Federal Motor Vehicle Safety Standards. (Application for copies of DOT publications should reference the Code of Federal Regulations, 49 CFR, and the Federal Register and should be addressed to the Superintendent of Documents, U.S. Government Printing Office, Washington, D.
10、C. 20402 ,) ENVIRONMENTAL PROTECTION AGENCY (EPA) Control of Air Pollution from New Motor Vehicles and New Noise Emission Standards for Transportation Equipment - Motor Vehicle Engines. Medium and Heavy Trucks. (Application for copies of EPA publications should reference the Code of Federal Regulati
11、ons, 40 CFR, and the Federal Register and should be addressed to the Superintendent of Documents, U.S. Government Printing Office, Washington, D.C. 20402.) 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-14382W 23 7777906 038773 7 a l l i t M
12、IL-T- 14382 (Copies of specifications, standards and other Government documents required by contractors in connection with specific acquisition functions should be obtained from the contracting activity or as directed by the contracting officer.) 2.2 Other publications. The following documents form
13、a part of this specification to the extent specified herein. Unless otherwise specified, the issues of the documents which are DoD adopted shall be those listed in the issue of the DoDISS specified in the solicitation. Unless otherwise specified, the issues of documents not listed in the DoDISS shal
14、l be the issue of the non-Government document which is current on the date of the solicitation. SAE, INC. SAE Standards and Recommended Practices 5537 - Storage Batteries. J551 - Performance Levels and Methods of Measurement of Electromagnetic Radiation from Vehicles and Devices (30-1000 MHz). for T
15、ruck-Trailer Jumper Cable. 55 60 - Seven-Conductor Electrical Connector 5706 - Rating of Winches. 51349 - Engine Power Test Code - Spark Ignition and Diesel. (Application for copies of SAE publications should be addressed to SAE, Inc., 400 Commonwealth Drive, Warrendale, PA 15096.) THE TIRE AND RIM
16、ASSOCIATION, INC. Yearbook. (Application for copies of Tire and Rim Association publications should be addressed to The Tire and Rim Association, Inc., 3200 W. Market Street, Akron, OH 44313.) 2.3 Order of precedence. In the event of a conflict between the text of this specification and the referenc
17、es cited herein (except for associated detail specifications, specification sheets or MS standards), the text of this specification shall take precedence. Nothing in this specification, however, shall supersede applicable laws and regulations unless a specfffc exemption has been obtained. 3. REQUIRE
18、MENTS 3.1 Standard vehicle riad accessories. Except as specified in 3.1.1 through 3.1.1.11, the vehicle, components, assemblies, and accessories to be delivered under the contract shall be standard or 3 . / Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS
19、-,-,-MIL-T-L4382W 23 W 999990b 03899115 O W : MI L-T- 14 38 2W optional items, which meet or exceed the requirements of this specification. All chassis items shall be as represented in the chassis manufacturers technical data, and special bodies or mounted equipment shall be as represented in the bo
20、dy and equipment manufacturers technical data. Technical data shall be limited to specifications and technical material identical to that furnished to the authorized company representatives for selection of vehicle models and components, and shall be available to the engineering offices of the procu
21、ring activity prior to delivery of the item. The chassis model furnished shall be not older than the chassis manufacturers current model on the date of invitation for bids. 3.1.1 Special requirements. In addition to the standard vehicle -. and components specified in 3.1, the vehicle shall be furnis
22、hed with sp9cial equipment as specified herein. 3.1.1.1 Painting and marking. Treatment, painting, marking and data plates shall be in accordance with MIL-STD-1223. The exterior color and identification markings shall be in accordance with the requirements of MIL-STD-1223 for the military service id
23、entified by the procuring activity (see 6.2). markings shall be furnished. ambulance markings for all vehicle colors shall be furnished as follows: When specified (see 6.2), concealed Unless otherwise specified (see 6.2), (a) On the front, where space permits, the word “AMBULANCE“ shall be displayed
24、 in mirror image, in letters three inches high, centered above the windshield. A three-inch high red cross on a four-inch square white field shall be located both to the left and to the right; and in line with the word “AMBULANCE“ above the windshield On the rear, a six-inch high red cross on an eig
25、ht-inch square white field shall be centered on each rear door panel, approximately eight to ten inches below the window, depending on the vehicle configuration On the sides, a 36-inch red cross on a 48-inch square white field shall be centered between the front door and the rear corner On the top,
26、a 36-inch red cross on a 48-inch square white field shall be applied The color of the markings for the crosses shall be gloss red matching color chip No. 11136 of FED-STD-595. The color of each white field shall be gloss white matching color chip No. 17886 of FED-STD-595. The color of the word “AMBU
27、LANCE“ shall be En contrast to the vehicles exterior color and shall be either gloss white matchfng the color of the white field, or the manufacturers standard gloss black. (b) (c) (d) (e) t 1 l ./ I I I 4 i I 1 I I 1 I I 1 1 I I 4 Provided by IHSNot for ResaleNo reproduction or networking permitted
28、 without license from IHS-,-,-MIL-T-L432W 23 W 7977906 0389736 2 W MIL-T- 14 382W 3.1.1.2 No smoking signs. Signs reading “NO SMOKING IN MEDICAL VEHICLES“ shall be prominently displayed, one in the drivers and one in the patients compartment. The signs shall be not less thn 3-1/2 inches high and 5 i
29、nches wide. The letters shall be red. on a contrasting background. 3.1.1.3 Identification and instruction plates. All operating controls for equipment in the patients Compartment and for ambulance equipment shall be provided with ident if icat ion plates and , as appropriate, with caution, warning a
30、nd instruction plates. Plates shall conform to composition A (class 1 or 2) or composition C of MIL-P-514. . 3.1.1.4 Rustproofing. When specified (see 6.21, the vehicle shall be rustproofed in accordance with FED-STD-297. When specified (see 6.2), tropical rustproofing in accordance with FED-STD-297
31、 shall be furnished. 3.1.1.5 Towing devices. Not less than two hooks, loops, or pins for towing the vehicle shall be furnished on the front of the vehicle. 3.1.1.6 Wood treatment. Wood shall be treated in accordance with MIL-STD-1223. 3.1.1.7. Brushguard. The vehicle shall be equipped with a radiato
32、r O and headlamp brus hguard . 3.1.1.8 Drive hubs. Unless interaxle compensating devices between front and rear axles are furnished, manual or automatic drive hubs, for disengaging the front wheels from the power train, shall be provided. 3.1.1.9 Trailer towing package. bhen specified (see 6.2), a t
33、railer towing package consisting of a pintle, safety chain attachment devices, a lighting receptacle, .and associated reinforcements and wiring shall be installed on the rear-of the vehicle. The pintle shall be of the fixed type conforming to/MSS1335-2 and shall be installed on the chassis frame wit
34、h reinforcements to transfer a vertical tongue load of not less than 1,800 pounds and a horiAmta1 drawbar load of not less than 18,000 pounds directly to the chasss sails. The rearmost portion of the pintle shall be forward but not more than four inches forward of the rearmost part of Che vehiele. T
35、wo trailer safety chain attachment devices, one adjacent eo each side of the pintle, shall be provided. Each attachment device shall provide an ultimate strength at least equal to the GVW of- the truck furnished. The attachment devices shall be capable of accommodating a standard grab hook (2-3/16 i
36、nches wide, 47/64 inch thick, arid 31/64-inch throat width) or a 3/8-inch chain. The lighting receptacle, conforming to SAE 5560 with its conductors connected and color coded as specified therein, shall be mounted in a readily accessible location near the pintle. 5 . P Provided by IHSNot for ResaleN
37、o reproduction or networking permitted without license from IHS-,-,-MIL-T-34382W 23 W 9999906 0389937 LI W MIL-T-14382W 3.1.1.10 Winch. When specified (see 6.2), a winch assembly to be used for assisting the truck in negotiating difficult terrain shall be provided on the front of the vehicle, The wi
38、nch shall conform to SAE 5706. The winch shall have forward and reverse drum drive and a drum clutch to permit free-spooling of the cable, mechanically or hydraulically driven and may be powered from either the transmission or the transfer case power takeoff. wound with not less than 150 feet of wir
39、e rope and shall be furnished with an end chain and hook. The winch single line pull rating on the bare drum and nominal breaking strength of the wire rope, chain and hook shall be not less than the chassis manufacturers GVW rating. rope shall be of improved plow steel, six-strand, 37-wire, hemp cor
40、e, preformed, regular lay hoisting rope, with cable loop formed at the end. A four-way roller guide shall be furnished. The bumper shall be mounted forward of the winch. The open area on either side of the winch shall be covered by a plate. The winch may be The winch shall be The wire 3.1.1.11 Silic
41、one brake fluid. When specified (see 6.2), and if available as the manufacturers standard or optional brake fluid, brake fluid conforming to MIL-B-46176 shall be provided in the hydraulic brake system, “CAUTION: USE SILICONE BRAKE FLUID ONLY, MIL-B-46176.“ A tag shall be placed near the master cylin
42、der stating: . 3.2 General design. 3.2.1 Federal Motor Vehicle Safety Standards. The vehicle and furnished accessories shall comply with all Federal Motor Vehicle Safety Standards in effect on the date of manufacture, 3.2.2 Air pollution control. The vehicle shall comply with EPA Regulations governi
43、ng Control of Air Pollution from New Motor Vehicles and Mew Motor Vehicle Engines in effect on the date of manufacture, In addition, vehicles destined for California shall comply with State of California regulations governing air pollution control in effect on the date of manufacture. 3.2.3 Sound le
44、vel. The interior sound level shall conform to Federal Motor Carrier Safety Regulation 393.94. sound level shall conform to EPA Noise Emission Standards for Transportation Equipment - Medium and Heavy Trucks. The vehicle exterior 3.2.4 Curb weight. The curb weight shall include the weight of the cha
45、ssis, ntegral cab and body, with all attachments, accessories, equipment, and a full complement f fuel, lubricants and-coolant. 6 - -. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-14382W 3.2.5 Gross vehicle weight. The gross vehicle weight (
46、GVW) shall consist of the curb weight, the driver and the assistant driver weights (175 pounds each), and a payload, evenly distributed over the load area, to provide not less than 10,000 pounds GVW. In addition, the actual GVFI of the vehicle furnished shall exceed the 10,000 pounds GVW when requir
47、ed to provide a payload of not less than 1,600 pounds. 3.2.6 Dimensions. The wheelbase shall be not less than 135 inches. The vehicle height shall be not more than 105 inches, exclusive of the warning light(s). The overall width of the vehicle, exclusive of mirrors, lights and reflectors, shall be n
48、ot more than 84 inches. The patients compartment floor shall be not more than 39 inches from the ground when the vehicle is without payload and is in a level position. 3.2.7 Standard frame and driveline. The chassis frame and driveline shall be the chassis manufacturers standard and shall not be spl
49、iced to extend the wheelbase. 3.2.8 Accessibility. The design of the vehicle and optional equipment shall permit access for routine servicing and shall permit access for replacement and adjustment of component parts and access- ories with minimal disturbance of other components and systems. 3.3 Performance. 3.3.1 Speeds and gradeability. High and low speed requirements shall be met with the vehicle loaded to specified
