1、1 li i* MIL-T-4b705E m 999990b L754947 089 m O I NOT MEASUREMENT SENSITIVE MIL-T-46705E 19 Februarv 1993 SUPERSEDING MIL-T-46705D 4 April 1986 MILITARY SPECIFICATION TRAILERS, STAKE: WAGON TYPE, 2270 AND 4540 KILOORAM (5,000 AND 10,000 POUND) CAPACITY, 4-WWEELI MODIFIED COMMERCIAL This specification
2、 is approved for use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 Scope. This specification covers 4-wheel, 2-wheel steerable, wagon type, stake and platform trailers for general purpose use. under this specification are commercial items that are required to be warrante
3、d by the manufacturer as specified in acquisition documentx. Vehicles procured 1.2 Classification. The trailer shall be one of the following types and classes, as specified (see 6.2). Type I - For limited use, 2270 kilograms (kg) (5,000 pounds) capacity. Type II - For highway use, 4540 kg (10,000 po
4、unds) capacity. Class A - Wood floor. Class B - Formed steel floor. Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: US Army Tank-Automotive Command, ATTN: AMSTA-UED, Warren, MI 48397-5000, by us
5、ing the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. AMSC NIA FSC-2 330 rn DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking p
6、ermitted without license from IHS-,-,-flIL-T-Vb705E 999990b L754948 TL5 MIL-T-46705E 2. APPLICABLE DOCUMENTS 2.1 GOVERNMENT DOCUMENTS. * 2.1.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein.
7、 Unless otherwise specified, the issues of these documents are those listed in the issue of the Department of Defense Index of Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation (see 6.2). SPECIFICATIONS FEDERAL * W-B- 13 1 * * MIL I TARY MIL-H-3912 STANDARDS FED
8、ERAL FED-STD-297 - Battery, Storage: Vehicular Ignition, Lighting and Starting . - Hardwood; Floorboards and Platforms: For Military Vehicles. - Rustproofing of Commercial (Nontactical) Vehicles. MIL I TARY MIL-STD-1223 - Nontactical Wheeled Vehicles Treatment, Painting, Identification Marking and D
9、ata Plate Standards. Aerospace Fusion Welders. Capacity, Manual Release. MIL-STD-1595 - Qualification of Aircraft, Missile and MS 51335 - Pintle Assembly, Towing, 18,000 Lbs. MS 51336 - Lunette-Coupler, Drawbar, Ring. . * * (Unless otherwise indicated, copies of federal and military specifications,
10、standards, and handbooks are available from the Naval Publications and Forms Center, Military Specifications and Standards, Bldg. 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094.) * 2.1.2 Other Government documents, drawings, and publications. The following other Government documents, drawings,
11、and publications form a part of this document to the extent specified herein. Unless otherwise specified, the issues are those cited in the solicitation. * DEPARTMENT OF DEFENSE Department of Defense Index of Specifications and Standards (DODISS). (Copies of the DODISS are available on a yearly subs
12、cription basis either from the Government printing office for hard copy, or microfiche copies are available from the Director, Navy Publications and Printing Service Office, 700 Robbins Avenue, Philadelphia, PA 19111-5093.) 2 Provided by IHSNot for ResaleNo reproduction or networking permitted witho
13、ut license from IHS-,-,-MIL-T-4b705E 999990b 1754949 951 m MIL-T-46705E I. DEPARTMENT OF TRANSPORTATION (DOT) Federal Motor Carrier Safety Regulations (FMCSR). Federal Motor Vehicle Safety Standards (FMVSS). * Federal Regulations, 49 CFR, and the Federal Register, and should be addressed to the Supe
14、rintendent of Documents, U.S. Government Printing Office, Washington, D.C. 20402.) (Application for copies of DOT publications should reference the code of * OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA) Code of Federal Regulations, 29 CFR. (Application for copies of OSHA publications should
15、reference the Code of Federal Regulations, 29 CFR, and the Federal Register and should be addressed to the Superintendent of Documents, U.S. Government Printing Office, Washington, D.C. 20402.) * 2.2 Non-Government publications. The following document6 form a part of this document to the extent spec
16、ified herein. Unless otherwise specified, the issues of the documents which are DoD adopted are those listed in the issue of the DODISS cited in the solicitation. Unless otherwise specified, the issues of the documents not listed in the DODISS are the issues of the documents cited in the solicitatio
17、n (see 6.2). * AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) ASME Boiler and Pressure Vessel Code (BPVC) Section IX - Qualification Standard for Welding and Brazing Procedures, Welders, Brazers, and Welding and Brazing Operators. (Application for copies of ASME publications should be addressed to
18、the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017.) * AMERICAN WELDING SOCIETY (AWS) AWS B2.1 - Standard for Welding Procedure and AWS D1.l - Structural Welding Code-Steel. Performance Qualifications. (Application for copies of AWS publ
19、ications should be addressed to the American Welding Society, 2501 NW 7th Street, Miami, FL 31025.) * THE EUROPEAN TYRE AND RIM TECHNICAL ORGANISATION (ETRTO) Standards Manual. (Application for copies of ETRTO publications should be addressed to the European Tyre and Rim Technical Organisation, 32,
20、Avenue Brugmann, 1060 Brussels, Belgium.) 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-qb705E 9999Ob 1754950 b73 MIL-T-46705E SOCIETY OF AUTOMOTIVE ENGINEERS, INC. (SAE) SAE Standards and Recommended Practices * 5537 - Storage Batteries. 5
21、560 - Seven Conductor Electrical Connector for 5682 - Rear Wheel Splash and Stone Throw Protec- 51067 - Seven Conductor Jacketed Cable for Truck- Truck-Trailer Jumper Cable. tion. (DOD Adopted). Trailer Connections. Coach Wiring. * J1292 - Automotive, Truck Tractor, Trailer and Motor (Application fo
22、r copies of CAE publications should be addressed to SAE, Inc., 400 Commonwealth Drive, Warrendale, PA 15096.) THE TIRE AND RIM ASSOCIATION, INC. Year Book. * (Application for copies of Tire and Rim Association publications should be addressed to The Tire and Rim Association, Inc., 175 Montrose West
23、Ave., Copley, OH 44321.) * (Non-Government standards and other publications are normally available from the organizations that prepare or distribute the documents. These documents also may be available in or through libraries or other informational services.) * 2.3 Order of precedence. In the event
24、of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS * 3.1 Standard vehicle and accesso
25、ries. Except as specified in 3.1.1 through 3.1.1.10, the vehicle, components, assemblies, and accessories to be delivered under the contract shall be the manufacturers standard or optional items, which meet or exceed the requirements of this specification. All vehicle items shall be as represented a
26、nd rated in the vehicle and equipment manufacturers technical data. Technical data shall be limited to specifications and technical material, identical to that furnished to the authorized company representatives for selection of vehicle models and components and shall be available to the engineering
27、 offices of the procuring activity, prior to shipment of the vehicle. The vehicle shall be a standard commercial trailer, of a model sold to a significant number of buyers other than the Government, in the course of normal business operations. The model furnished shall be not older than the manufact
28、urers current model on the date of invitation for bids. 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-VbOSE m 99999Ob LiSVSL SOT m MIL-T-46705E 3.1.1 Special requirements. In addition to the standard vehicle and components specified in 3.1,
29、 the vehicle shall be furnished with special O - equipment as specified herein. * 3.1.1.1 Treatment and painting. The vehicle shall be treated and painted in accordance with MIL-STD-1223. activity or the appropriate military service (see 6.2), the exterior color shall be in accordance with MIL-STD-1
30、223. As specified by the procuring * 3.1.1.2 Markings and data plates. As specified by the procuring activity for the appropriate military service (see 6.2), identification markings and data plates shall be in accordance with MIL-STD-1223. * 3.1.1.3 Rustproofing. The vehicle shall be rustproofed in
31、accordance with MIL-STD-297. * 3.1.1.4 Brake lights. At least one pair of brake lights shall override the four-way emergency flasher or the two systems shall be independent of each other. Modifications to the manufacturers standard product to accommodate this requirement shall not compromise conform
32、ance to any Federal Motor Carrier Safety Regulation referenced herein or to any Federal Motor Vehicle Safety Standard. If additional lights are added to the vehicle, the lights shall be selected from the chassis manufacturers standard matching hardware. * 3.1.1.5 Welders and welding. In addition to
33、the requirements of 3.24.4, all welders employed in the fabrication of the trailer shall be certified, before any welding is accomplished, in accordance with MIL-STD-1595; the welding qualifications of the ASME BPVC, Section IX; or AWS B2.1 or D1.l. The certification that the welders have passed the
34、 qualifications test shall be on file at the contractors facility and shall be available for review by the Government. * 3.1.1.6 Lubrication chart. An illustrated or schematic diagram type lubrication chart shall be provided on the trailer. attention to all lubrication fittings and specify the range
35、 and grade of lubricants required for critical temperatures. The chart shall be permanently attached to the trailer in a readily visible location. shall be inscribed on a plate conforming to composition A (class 1 or 2) or composition C of MIL-P-514. The chart shall direct The chart 0 * 3.1.1.7 Hard
36、wood. The platform on class A vehicles (see 3.16) qhall be floored with apitong, white or red oak, or white ash as specified in MIL-H-3912. Apitong is allowed for flooring only, provided the average weight shall be not less than 753 kilograms per cubic meter (kg/m3) (47 pounds per cubic foot (pcf),
37、with none of the individual pieces weighing less than 673 kg/m3 (42 pcf) , with no more than 15 percent moisture content at time of weighing. Flooring is to be Government source inspected. Wood racks (stakes and slats) (see 3.18) shall be solid or jointed stock hardwood, other than apitong, conformi
38、ng to MIL-H-3912. 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NIL-T-46705E m 9999906 1754952 44b m MIL-T-46705E 3.1.1.8 Wood treatment. Wood, including apitong, shall be treated with wood preservative in accordance with MIL-STD-1223. 3.1.1.9 Lu
39、nette. The trailer shall be equipped with a lunette conforming to MS 51336 and 3.11. * 3.1.1.10 Pintle. A pintle conforming to MS 51335-2 shall be furnished. Mounting shall include reinforcement to transfer pintle loads directly to the vehicle frame. The rearmost portion of the installed pintle shal
40、l be not more than 100 millimeters (mm) (4 inches) forward of the rearmost part of the vehicle. Two trailer safety chain attachment devices, one adjacent to each side of the pintle, shall be provided. an ultimate strength at least equal to the curb weight of the trailer plus the rated payload capaci
41、ty of the trailer. capable of accommodating a standard grab hook 56 mm (2-3/16 inches) wide, 18.7 mm (47/64 inch) thick and 12.3 mm (31/64 inch) throat width for a 9.5 mm (3/8 inch) chain. Each attachment device shall provide The attachment devices shall be 3.2 General design. 3.2.1 Federal Motor Ve
42、hicle Safety Standards. The vehicle and furnished accessories shall comply with all Federal Motor Vehicle Safety Standards in effect on the date of manufacture. * 3.2.2 1. The vehicle, with all furnished attachments, accessories and equipment, shall enable compliance by any user with all OSHA and FM
43、CSR user regulations that are vehicle or vehicle equipment dependent. commercial user of such a similar type, class and size of semitrailer for the same general use. See 6.1. Regulations shall be those that are applicable to a 3.2.3 Ratings. Vehicle ratings shall be the manufacturers published ratin
44、g. Component and vehicular ratings shall not be raised to meet the requirements of this specification. available, verification of ratings shall be available to the engineering office of the procuring activity. When published ratings are not * 3.2.4 Dissimilar metals. All dissimilar metals used throu
45、ghout the vehicle shall be insulated from one another to prevent galvanic or electrolytic action. * 3.2.5 Prohibited materials. Asbestos materials shall not be used in any form in any part of the vehicle. radioactive materials in which the specific activity is greater than 0.002 microcurie per gram
46、or activity per item equals or exceeds 0.01 microcuries. No item, part or assembly shall contain * 3.2.6 Accessibility. The design of the vehicle and optional equipment shall permit access for routine servicing and shall permit access for replacement and adjustment of component parts and accessories
47、 with minimal disturbance of other components and systems. 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-h MIL-T-46705E W 9999906 L754953 382 = MIL-T-46705E * 3.2.7 Lubrication. Lubrication means shall be provided for all parts of the trailer nor
48、mally requiring lubrication. Where the use of high lubricating pressure will damage grease seals or other parts, fittings with pressure release shall be used. * 3.2.8 Safety. All equipment or exposed portions of the equipment which are subject to extreme temperatures and inclement weather and all ro
49、tating or reciprocating parts which are of such a nature or so located as to become a hazard to operating personnel shall be insulated, fully enclosed, or properly guarded. 3.3 Performance. The trailer shall evidence no part failure, deformation, permanent set or interference between parts when towed, both empty and when loaded as specified in 3.4: (a) At speeds as great as 32 kilometers per hour (km/h) (20 miles per hour (mph) over unimproved roads and
