1、MIL-T-50606A(MU) 6 LJ 21 July 1975 SUP ERS EDING MIL-T-50606 (MU) 30 November 1971 MIL-T-SObObA m 77777Ob LBqL5L3 351 MILITARY SPECIFICATION TESTER-RECEIVER TRANSMITTER, USER: 10559600 WARNING - EYE HAZARD EXTREtlE MiJTION MJST BE OBSERVED IN OPERATING AND TESTING THE RECEIVER-TRANSIUTTER. IF THE LA
2、SER LIGHT BEAM ENTERS THE HUMAN EYE, THE RETINA OF THE EYE CAN BE BURNED. THE HICH ENERGY DENSITY OF TNE BEAH CAW ALSO PRODUCE SUCH DAMAGE AT EXTREME RANCE AND BY REFLECTION FROM ANY SIIINY SURFACE SlJCH AS GLASS, METAL, PAINT, ETC. IN VImJ OF THE POSSIBILITY OF PRODUCINC: SERIOUS EYE DAMACE, THE RE
3、CEIVER-TRANSMITTER SHOULD NOT BE OPERATED UNLESS THE TARGET AREA HAS BEIZN EVACUATED. 1. SCOPE 1.1 This specification covers one type of electro-optical unit known as TesterReceiver Transmitter, Laser: 10559600 (see 6.1). 2. APPLICABLE DOCUMENTS 2.1 The following documents, of the issue in effect on
4、 date of invitation for bids or request for proposal, forn a part of this specification to the extent specified herein. SPECIFICATIONS Military MIL-F-139 2 6 XIL-P-14232 MIL-I-45 60 7 ?!IL-R-14 86 5 IIIL-C-456 62 Fire Control Materiel: General Specification Governing the Manufacture and Inspection o
5、f Parts, Equipment and Toale for Army Hateriel: Packaging and Packing of Inspection Equipment : Acquis it ion, Haintenance, and Dfsposition of Receiver-Transmitter, Laser: 10559281 Calibration System Requirements 1A I FSC-49 31 #i 2198 4-2 Provided by IHSNot for ResaleNo reproduction or networking p
6、ermitted without license from IHS-,-,-MIL-T-50bObA 999990b 1841514 298 MILT 50606A(MU) STANDARDS . lilitary MIL-STD- 105 Sampling Procedures and Tables for Inspection by Attributes MIL-STD-109 Qualitv Assurance Tenns and Definitions MIGSTD-810 Environmental Test Methods DRAWINGS U.S. Army, Frankford
7、 Arsenal F10559600 Tester-Receiver Transmitter, Laser PACKAGING DATA SHEET 10559600 Packaging of Tester-Receiver Transmitter, Laser: 10559600 (Copiee of specifications, standards, drawings, and packaging data sheets required by suppliers in connection with specific procurement functions 6hould be ob
8、tained from the procuring activity or as directed by the can- tracting officer.) 3. REQUIREMENTS 3.1 Fabrication.- The tester shall be manufactured in accordance with Drawing F10559600 and drawings pertaining thereto. 3.2 General specification.- The tester shall meet the following requir and packing
9、, shall be obtained from the same source of supply as used in regular production. The sample for The sample shall All parts and 4.2.1 Government testin then reduce the inlet pressure to less than 3 psig and reinstall the nitrogen exhaust screw. surize again to a pressure of 10 $1 psig. Repres- 4,6.3
10、.2 Temperature.- The test chamber shall be in accordance - trith the applicable “Test Facilities“ provisions of MIL-F-13926. The test equipment shall be positioned outside the test chamber and be capable of presenting the necessary signals to the tester in the temperature chamber. Perform this test
11、in accordance with Procedure I of MIL-F-13926 except that the low storage temperature shall be -65F in lieu of -80F and the operating conditions shall be +4OoF and +lOOF in lieu of those specified in Table IV therein, be greater than 7F per minute. At each of the specified operating tempera- tures (
12、including ambient), perform the tests of 4.6.2.1.1 through 4.6.2.3.1 to determine compliance with 3.3.3.1 and 3.3.3.2. The rate of temperature change during cycling shall not 4.6.3.3 Vibration.- Perform this test utilizing the apparatus apeci- fied in llethod 514,l of MIL-STD-810 and in accordance w
13、ith the vibratory conditions specified in 3.3.3.3, Following vibration exposure, examine the tester for structural failures, loose hardware, wire breakage, and abrasion and perform the tests of 4.6.2.1.1 through 4.6.2.3.1 to determine com- pliance with 3.3.3.3. 4 . 6 . 3.4 - Shock.- Perf om this tes
14、t utilizing apparatus specified in Method 516.1 of MIL-STD-810, in accordance with Procedure I therein and with the conditions specified in 3.3.3.4. Following exposure to shock, examine the tester for structural failures, loose hardware, and wire break- age and perform the tests of 4.6.2.1.1 through
15、 4.6.2.3.1 to determine compliance with 3.3.3.4. 4.6.3.5 Immersion.- Connect the nitrogen charging valve on the tester to a cylinder of nitrogen and pressurize the tester to 10 21 psig. Observe the tester for evidence of leakage (gas bubbles) for a period of 30 minutes to determine compliance with 3
16、.3,3.5. 12 22096 6-13 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-SObObA D 99999Ob 18q1.525 073 5. PREPARATION FOR DELIVERY 5.1 PackaRing , packing, and marking .- Packaging, packing, and marking shall be in accordance with Packaging nata S
17、heet 10559600. level of protection shall be as specified in the procurement document. The 6. NOTES 6.1 Intended use,- The tester is a unit of the laser range finder special tools and test equipment. 6.2 Ordering data.- Procurement documents should specify the f ollowinp, : a. b. C. d. e. Custodian :
18、 Army - i4U 22 10 Title, number, and date OC this specification. Applicable packaging data sheet number (see 5.1). Selection of applicable levels of preservation, packaging, and packing. Applicable stock number. Requirement for First Article Submission. Preparing Activity: Army - 1-nl Project No. 49314129 13 *Ud. GOVERNMENT PRINTING OFFICE: lOT5-60-Td/BW R-14 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
