1、I INCH-POUND 1 MIL-T-53029C MIL-T-53029B 21 April 1989 MILITARY SPECIFICATION TANKS, FABRIC, COLLAPSIBLE: 3,000, 10,000, 20,000, AND 50,000 GALLON, DRINKING WATER This specification is approved for use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 ScoDe. This specificati
2、on covers collapsible water tanks: 3,000, 10,000, 20,000, and 50,000 gallon, complete with fittings, ground cloth, accessories, and repair items packed in a box. 1.2 Classification. Tanks are to be the following capacities, as specified (see 6.2). 3,000 gallon 10,000 gallon 20 , O00 gal 1 on 50 , O0
3、0 gal 1 on 2. APPLICABLE DOCUMENTS 2.1 Government documents. 2.1.1 SDecifications and standards. The following specifications and standards form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the issue of the Depa
4、rtment of Defense Index of Specifications and Standards (DoDISS) and supplement thereto, cited in the solicitation (see 6.2). Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: US ARMY BELVOIR RDE
5、CTR, ATTN SATBE TSE, 10101 GRIDLEY RD STE 104, FT BELVOIR VA 22060-5818 by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. AMSC N/A FSC 5430 DISTRIBUTION STATEMENT A. Approved for public release, distribution is unlimited. Pr
6、ovided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- - MIL-T-53029C 99999Ob L987b5b 623 m MIL-T-53029C SPECIFICATIONS FEDERAL A-A-2027 A-A-55057 L-P-378 FF-B-561 FF-B-584 FF-N-836 FF-W-92 RR-C-271 ww-v-35 ZZ-H-561 PPP-B-601 PPP-B-636 PPP-c-1797 M I L ITARY
7、 MIL-P-116 MIL-C-5541 MIL-A-8625 MIL-C-20696 MIL-B-26195 MIL-T-27730 MIL-R-52255 MIL-V-58039 STANDARDS FEDERAL FED-STD-191 FED-STD-595 MILITARY MIL-STD-105 MIL-STD-129 MIL-STD-130 MIL-STD-731 MIL-STD-1472 MS9021 MS27020 MS27021 - Strapping, Nonmetallic (Nylon, Flat and Connectors). - Panel S , Wood/
8、Wood Based; Construction and Decorati ve. - Plastic Sheet and Strip, Thin Gauge, Polyolefin. - Bolts , (Screw) , Lag. - Bolts, Square Neck, Tee Head. - Nut, Square, Hexagon, Cap, Slotted Castle, Clinch, Knurled, Welding and Single Ball Seat. - Washer, Flat (Plain). - Chains and Attachments, Welded a
9、nd Weldless. - Valve, Ball. - Hose. Rubber, and Hose Assemblies, Rubber Smooth Bore, Water Suction and Discharge. - Boxes, Wood, Cleated Plywood. - Boxes, Shipping, Fiberboard. - Cushioning Material , Resilient, Low Density, Unicellar, Polypropylene Foam. - Preservation, Methods of. - Chemi cal Conv
10、ersion Coatings on Al uminum and Al uminum - Anodic Coatings, for Aluminum and Aluminum Alloys. - Cloth, Coated, Polyester or Nylon, Waterproof. - Boxes , Wood-Cl eated, Skidded, Load-Beari ng Base. - Tape, Antiseize, Polytetrafluoroethylene, with Dispenser. - Repair Kit and Repair Kit Components fo
11、r Collapsible Fabric - Valve, Gate, Rising Stem, Double Acting, Aluminum. Al 1 oys. Tanks and Boats. - Textile Test Methods. - Colors Used in Government Procurements. - Sampling Procedures and Tables for Inspection by Attributes. - Marking for Shipment and Storage. - Identification Marking of U.S. M
12、ilitary Property. - Qual i ty of Wood Members for Containers and Pal lets. - Human Engineering Design Criteria for Military Systems, - Packing, Preformed - AMS 7271, “O“ Ring. - Coupl ing Half , Quick Disconnect , Cam-Locking Type, Mal e, - Coupl ing Half , Quick Disconnect , Cam-Locki ng Type, Mal
13、e, Equipment and Facilities. Internal Pipe Thread, Type I. Hose Shank, Type II. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-53029C W 999990b 1787657 5bT m MS27023 MS27025 MS27026 MS27027 MS27028 MS27029 MS27030 MS29513 MIL-T-53029C - Coup
14、ling Half, Quick Disconnect, Cam-Locking Type, Male, - Coupling Half, Quick Disconnect, Cam-Locking Type, Female, - Coupling Half, Quick Disconnect, Cam-Locking Type, Female, - Coupling Half, Quick Disconnect, Cam-Locking Type, Female, - Coupling Half, Quick Disconnect, Cam-Locking Type, Cap, - Coup
15、ling Half, Quick Disconnect, Cam-Locking Type, Plug, - Gasket, Coupling Half, Quick Disconnect, Cam-Locking Type. - Packing, Preformed, Hydrocarbon Fuel Resistant, “O“ Ring. F1 anged, Type IV. Hose Shank, Type VI. External Pipe Thread, Type VII. Flanged, Type VIII. Dust, Type IX. Dust , Type X. (Unl
16、ess otherwise indicated, copies of federal and military specifications, standards, and handbooks are available from: STDZN DCMNT ORDER DESK, BLDG 4D, 700 ROBBINS AVE, PHILADELPHIA PA 19111-5094.) 2.1.2 Other Government publications. The following other Government publication forms a part of this doc
17、ument to the extent specified herein. Unless otherwise specified, the issues are those in effect on the date of the solicitation. FOOD AND DRUG ADMINISTRATION (FDA) Code of Federal Regulation, Title 21, Chapter 1, Part 177. (The Code of Federal Regulation CFR and the Federal Register FR are for sale
18、 on a subscription basis by: SUPT OF DCMNTS, GVT PRINTG OFC, WASHINGTON DC 20402. When indicated, reprints of certain regulations may be obtained from the Federal Agency responsible for issuance thereof.) 2.2 Non-Government publications. The following documents form a part of this document to the ex
19、tent specified herein. Unless otherwise specified, the issues of the documents which are DoD adopted are those listed in the issue of the DoDISS cited in the solicitation. Unless otherwise specified, the issues of documents not listed in the DoDISS are the issues of the documents cited in the solici
20、tation (see 6.2). AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI) B16.15 - Cast Bronze Threaded Fittings. B18.2.1 - Square and Bolts and Screws (Inch Series). B18.2.2 - Square and Hex Nuts (Inch Series). 818.21.1 - Lock Washers. B18.22.1 - Plain Washers. H35.1 - Alloy and Temper Designation Systems for
21、 Aluminum (Application for copies should be addressed to: AMERCN NATL STANDS INST, 1430 BROADWAY, NEW YORK NY 10018.) 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-mIL-T-53027C m 77777Ob I1787658 LiTb m MIL-T-53029C AMERICAN PUBLIC HEALTH ASSOCIA
22、TION, INC., (APHA) Standard Methods for the Examination of Water and Wastewater. (Application for copies should be addressed to: AMERCN PUB HLTH ASS INC, 1015 18TH STRET, WASHINGTON DC 20036.) AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) A 153 - Zinc Coating (Hot Dip) on Iron and Steel Hardware
23、. B 26 - Aluminum Alloy Sand Casting. B 85 - Aluminum-Alloy Die Castings. B 108 - Aluminum-Alloy Permanent Mold Castings. B 209 - Aluminum and Aluminum-Alloy Sheet and Plate. D 412 - Rubber Properties in Tension. D 413 - Rubber Property - Adhesion to Flexible Substrate. D 429 - Rubber Property - Adh
24、esion to Rigid Substrates. D 471 - Rubber Property - Effect in Liquids. D 750 - Rubber Deterioration in Carbon-Arc or Weathering Apparatus. D 751 - Standard Method of Testing Coated Fabrics. D 1149 - Test Method for Rubber Deterioration - Surface Ozone racking in a Chamber. D 1330 - Rubber Sheet Gas
25、kets. D 1729 - Vi sua1 Eva1 uation of Color Differences of Opaque Material s. D 2000 - Rubber Products in Automotive Applications. D 2565 - Operating Xenon Arc-Type (Water-cooled) Light Exposure Apparatus With and Without Water for Exposure of Plastics. (Application for copies should be addressed to
26、: AMERCN SCTY FOR TEST however, conformance to these requirements shall not be construed as justification for failing to meet other requirements of this specification. 3.3.1 Material deterioration prevention and control. The tank shall be fabricated from compatible materials or treated to provide pr
27、otection against the various forms of corrosion and deterioration that may be encountered in any of the operating and storage environments to which the tank may be exposed. 3.3.2 Recovered materials. For the purpose of this requirement, recovered materials are those materials which have been collect
28、ed from solid waste and reprocessed to become a source of raw materials, as distinguished from virgin raw materials. The metal components, pieces and parts incorporated in the tank may be newly fabricated from recovered materials to the maximum extent practicable, provided the tank produced meets al
29、l other requirements of this specification. Used, rebuilt or remanufactured components, pieces and parts shall not be incorporated in the tank. 3.3.3 Cloth. When tested as specified in 4.5.2.8, the cloth of the coated fabric shall have a retained breaking strength that is not less than 50 percent of
30、 its initial breaking strength warp and fill. 3.3.4 Coatinss. The coatings shall conform to table I. All coatings which may directly contact or indirectly affect drinking water shall be suitable for use with water. The coatings shall be suitable for use when in continuous contact with rainwater and
31、ground water, and shall be ozone resistant and weather resistant. 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-lIL-T-53029C m 9999906 1987660 05Y m I tem 1. 2. 3. 4. 5. 6. MIL-T-53029C TABLE I. Characteristics of coatinss. Property Tensile Stren
32、gth (initial) g/ U1 ti mate el ongat i on Tensile strength after immersion in distilled water at 160 i2 “F for the following durations: 14 days 42 days Resistance to light after 1500 hrs accel erated weathering at 10% elongation A/ Taste that is, compounds between the cloth and the outside of the ta
33、nk. This requirement may be met by certification from the material manufacturer that the material provided has been subjected to, and passed the specified weather resistance test, and providing those test results for inclusion in the first article test report. - 2/ Al ternate corex D fi 1 ters in pl
34、 ace. - 3/ Method ASTM D 2565, Xenon Arc, Procedure A, inner and outer borosilicate filters; deionized water (20 i3 “C); cycle: 690 minutes light exposure, 30 minutes light and spray; black panel temperature (63 +3 “C); relative humidity (45 +5%). Specimen rotation every 250 hours. and the inside of
35、 the tank. 104 k3.6 “F (40 +_2 “C) having a partial pressure of ozone of 50 milipascals (mPa) . more than 24 hours prior to initial tensile strength testing. - 4/ Applicable to all interior compounds. That is, compounds between the cloth - 5/ Test method A specimen shall be conditioned for 7 days at
36、 a temperature of - 6/ Samples may be conditioned in distilled water at room temperature for not 3.3.5 Coated fabric. The coated fabric shall be free from blisters, holidays or pinholes (see 6.8) and shall show no signs of coating delamination. The coated fabric shall withstand the effects of humidi
37、ty and weather elements without damage, deterioration, or failure of meeting performance requirements of table II. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-53029C 999990b 1987bbl T90 m I tem 1. 2. 3. 4. 5. 6. 7. 8. MIL-T-53029C TABLE II.
38、 Characteristics of coated fabric. Property Weight (oz/sq.yd) Tearing strength warp and fill (lb min.). Breaking strength (lbs/in min.). Weathering resistance after 500 hours exposure at 5 percent el ongat i on , warp and fill (% retention of initial breaking breaking strength min Puncture resistanc
39、e (lbs min.). Low temperature crease resistance appearance after unfol ding. B1 ocki ng. Coating adhesion. (initial)(lbs/in min) Requirement rank capacity (gal 1 ons) 3 , O00 20 , O00 10 , O00 50,000 30 in./62 maximum 25 400 90 110 35 500 90 150 No cracking, peel i ng or del ami nat i on I Specimens
40、 to separate within 5 seconds Test paragraph or test method Of FED-STD-191 5041 5134 5102 5804/5102 L/ 4.5.2.12 4.5.2.13 4.5.2.14 4.5.2.15 and 4.5.2.15.1 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-53029C 9999906 1987662 927 Item 9. MIL-T
41、-53029C TABLE II. Characteristics of coated fabric - Continued. Requirement Test paragraph Property Tank capacity (gallons) or test method 3 , O00 20 , O00 of FED-STD-191 and 10,000 50 , O00 Coating adhesion after immersion in distilled water at 160 +2 “F for the following duration: 14 days (lbs/in)
42、 4.5.2.15.1 20 20 42 days (1 bs/in) 4.5.2.15.1 20 20 - 1/ Specimens shall have exterior coating facing carbon arc. Alternate corex D filters shall be removed. This requirement may be met by certification from the material manufacturer that the material provided has been subjected to, and passed the
43、specified weather resistance test, and providing those test results for inclusion in the first article test report. 3.3.6 Certification. The contractor shall provide certification that all surfaces of the tank that contact drinking water comply with the requirements of the Code of Federal Regulation
44、s, Title 21, Food and Drugs, Part 177.2600 (21 CFR 177.2600), or the National Sanitation Foundation Standard 61 (NSF-61). 3.4 Tank construction. The tank shall be fabricated from coated fabric as specified herein. The configuration and dimensions of the tank and the location of the fittings and hand
45、les shall be as shown in figures 1 through 4. Seams shall not coincide with tank fittings. The longitudinal seams of the tank top shall not coincide with the seams of the tank bottom at each end closure. Coated fabric panels may be spliced together; however, all splices shall be located on the botto
46、m of the tank. All splices shall conform to requirements for seams as specified in 3.4.1. Splices in adjacent panels shall not coincide. On both the interior and exterior of the tank, all coated fabric, edges of seams, fabric flanges of fittings, and splices shall be covered to a thickness of not le
47、ss than 10 mils with coated fabric. All tank fittings shall be located a minimum of 8 inches away from any seam or splice. 3.4.1 Seams. All tank seams including end closures, handle patches, and fabric flanges of fittings shall conform to the requirements of table III. 8 Provided by IHSNot for Resal
48、eNo reproduction or networking permitted without license from IHS-,-,-J I tem 1. 2. 3. 4. 5. Property Breaking strength (initial) (lbs/in min.)- 1/ Breaking strength after immersion in distilled water at 160 +2 “F for the following durations: 14 days (lbs/in) 42 days (1 bs/in) Dead load shear resist
49、ance under 50 lb/i stress at 180 “F for 8 hours. Peel adhesion (i nit i al ) (lbs/inmin). Peel adhesion after immersion in distilled water at 160 +2 “F for the following durations: 14 days (1 bs/in) 42 days (lbs/in) Requirement rank capacity (gallons) 3 , O00 20 , O00 10,000 50 , O00 400 280 280 500 400 400 0.1 inch slippage (max). 30 20 20 30 20 20 Test paragraph, test methods of ASTM test methods D 7512/ 3 471/D 7
