1、OO-L-.131K 35 7997774 002Ll754 O g: - 3 ,Seamless and 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-00-L-23LK 35 7777774 002Li75b 4 m! 00-L-131K Federal Standard: FED-STD-123 - Marking for Domestic Shipment (Civil Agencies), (Activities outside t
2、he Federal Government may obtain copies of Federal Specifications, Standards, and Handbooks as outlined under General Information in the Index of Federal Specifications and Standards and at the prices indicated in the Index. The Index, which includes cumulativemonthly supplements as issued, is for s
3、ale on a subscription basis by the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402. (Single copies of this specification and other Federal Specifications required by activities outside the Federal Government for bidding purposes are available without charge from Bu
4、siness Service Centers at the General Services Administration Regional Offices in Boston, New York, Washington, DC, Atlanta, Chicago, Kansas City, MO, Ft. Worth, Denver, San Francisco, Los Angeles, and Seattle, NA. (Federal Government activities may obtain copies of Federal Specifications, Standards
5、, and Handbooks and the Index of Federal Specifications and Standards from established distribution points in their agencies .) Military Specification: MIL-L-315 3 - Laundry and Dry-cleaning Machinery and Equipment (For Fixed Installations), Preparation for Delivery for Domestic and Overseas Shipmen
6、t. Military Standards: MIL-STD-105 - Sampling Procedures and Tables for Inspection by MILL-STD-129 - Marking for Shipment and Storage. MIL-STD-130 - Identification Marking of U.S. Military Property. Attributes. (Copies of Military Specifications and Standards required by suppliers in connection with
7、 specific procurement functions should be obtained from the procuring activity or as directed by the contracting officer.) 2.2 Other publications. The following documents form a part of this specification to the extent specified herein. identified, the issue in effect on date of invitation for bids
8、or request for proposal shall apply. Unless a specific issue is 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-anisa1 Engineers (ASME) Publication: tlelding Qualifications o% the American Society of Mechanical Engineers. (Applieatisn for copies sh
9、ould be addressed to the American Sqciety of Nechanical. Engineers New Pork, NY iOOl7.3 United Engineering Genter, 345 East 47th Street, Americaia Society Por Testing And Materia1.s (ASlM) Standerds: - - -. - - 11167-7Q - COrKOSiOn- nickel-copper-alloy conforming to class A or B of QQ-N-28% (ay: csm
10、pss%tion A of QQ-N-288; or copper- alloy conforming to any alloy number from GI through 68 of QQ-C-390. 3.3.2 Materials for fasteners. Rivets bolts, screws , nuts, and washers shall be of carbon or alloy steel, except where brass or corrosion-resistant metal is to be fastened, in which case the fast
11、eners shall be of brass OP corrosion-resistant metal respectively (qee 3.3.1). % an iron rest; a swivel-suspen- sion bracket with cord and outlet for plugging in the electric iron; pilot 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-light; and on
12、 and off switches. The pilot light and switches shall operate 4 as intended when tested as specified in 4.4.2. fitted or supported on the board so that the entire outfit is self-contained. The accessories shall be suonlied with not less than 4 feet of hose suitable for-use with a steam at: the end o
13、f the hse where connection is made with condenser or waterline. The hose shall be provided with an 8 inch or larger corrosion-resistant metal or cadmium plated steel hanging spring for suspending the gun near the work to be sprayed and within convenient reach of the operator. The spring shall be mou
14、nted on the hose in such a manner as not to damage the hose. The gun shall be either the pistol type or the squeeze type. The squeeze type shall operate by squeezing the lever on the side. The gun shall, be supplied with a brass or copper alloy finned chamber designed for condensing steam and storin
15、g this condensate under pressure. working parts that come in contact with the condensate shall be fabricated from brass or corrosion-resistant metal. The chamber and steam line shall not leak when tested as specified in 4.4.1. The I I shall be of 25 and 50-gallon capacity, respectively. Assembled st
16、arch cookers shall show that the assembly of components has complete and proper interrelationship and that the cookers operate without leaks and structural failures. termined when tested in accordance with 4.4.2. Conformance to the above requirements shall be de- 3.5.5 .i Shells. The starch cooker s
17、hall have an exterior shell of Starch cooker interior shall be made of copper copper or of corrosion-resistant metal specified in 3.3.1, not less than 0.022 inch thick. or corrosion-resistant metal. filled with asbestos or other approved heat insulating material at least 1-1/2 inches thick to preven
18、t sweating and radiation of heat. The outer shell shall be riveted or welded to a metal bottom mounted on legs having holes for securing the cooker in position. The space between the shells shall be I 3.5.5.2 Cover and handle. A hinged cover with handle shall be pro- vided and fixed to the shell, Th
19、e cover shall be fabricated from the same type of material as the shell and be of such thickness and form to prevent buckling when in normal use. from the same type of material as the cover or shall be cast from brass or copper alloy. The handle shall be formed The hinge shall be cast from brass or
20、copper alloy with Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-00-L-13 1K 3.5.5.3 Steam and condensate connection. The cooker shall be provided with a steam charger to provide heat and mixing action to the cooker. Means shall be provided to elimin
21、ate condensate from the steam supply lines. 3.5.5.4 Drawoff cock. A brass drawoff cock shall be provided in the side at the bottom of the shell. 3.5.5.5 Graduated scale. The cooker shall have an attached graduated scale or suitably embossed rings for each 5 gallons on 25-gallon cookers and for each
22、10 gallons on the 50-gallon cooker to indicate the amount of starch contained. 3.5.6 Item 10 - Tables, shirt, finishing, laundry, comercial. Tables, shirt finishing (folding) shall be type I for manual operation and type II for semiautomatic operation. 3.5,6.1 .Wpe I. The type I table shall consist
23、of a ferrous metal frame including legs, and shall have a corrosion-resisting steel top or a ferrous metal top covered with plastic or other noncorrosive material. The top shall have a boot or manually controlled electrically heated collar finishing and shaping mold fitted into it and, in addition,
24、shall have a recessed well to hold a supply of shirt bands. A hinged, nonferrous or suitably plated metal shirt board about which the shirt may be uniformly folded (the folded shirt shall be 8 5 1/2 inch by 12 %1/2 inch),and a spring loaded over-center shirt clamp, shall be supplied. for receiving t
25、he folded shirts shall be attached to the rear of the table and shall extend the full length of the table. 4.4.5the equipment shall fold shirts by pedal or manual operation and moving components shall operate. A ferrous metal shelf When tested as specified in 3.5.6.2 Type II, The type II table shall
26、 consist of a table equipped with an air or hydraulically operated folding mechanism which shall automatically, at the will of the operator, fold the sleeves and sides of a shirt over a folding plate or the design may permit the sleeves to be folded manually. The tail folds shall be accomplished man
27、ually so the folded shirt is 8 i- 1/2 inch by 12 +1/2 inch. ferrous metal fram, including legs, and shall have a corrosion-resisting steel top or, in lieu thereof, a ferrous metal top covered with plastic or other noncorrosive material. The top shall have a recessed, manually con- trolled, air opera
28、ted (expanding and contracting) and electrically heated collar form, and a recessed well to hold a supply of shirt bands, folding plate and the folding arms shall be of nonferrous material and the folding plate shall be equipped with clips to hold shirt boards. completion of the fold, at the will of
29、 the operator, the collar form shall contract and the folding plate shall raise for easy removal of the folded shirt. The table shall have a The Upon 9 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-00-L-131K 3.5.7 Item 11 - Tank, soap, laundry, com
30、mercial. Unless otherwise specified (see 6.2), the soap tank shall be cylindrical. The tank shall be of the following sizes: Size 1 - 30-gallon. Size 2 - 60-gallon. Size 3 - .lOO-gallon. Size 4 - 200-gallon. Size 5 - 500-gallon. 3.5.7.1. Tank, The tank shall be constructed of galvanized ferrous meta
31、l or corrosion-resistant metal not less than 0.070 inch thick. The bottom shall be flanged, riveted, and soldered or welded to the side. Assembled soap tanks shall show that the assembly of components has com- plete and proper interrelationship and that the tanks operate without leaks or structural
32、failures. The soap tank shall be tested as specified in 4.4.2. 3.5.7.1.1 Reinforcement. The top shall be reinforced by a band or outwardly extending flange not less than 1/2 inch wide, 3.5.7.1.2 Fittings. The tank shall be fitted with a brass drawoff cock not less than 3/4 inch NPT in diameter. I.D.
33、 brass steam line to the bottom of the tank with a shutoff valve 4 inches NPT above the tank top, and a 3/8-inch I.D. brass waterline complete with a 3/8-inch NPT globe shutoff valve for the 30-gallon soap tank and a 3/4-inch NPT globe shutoff valve for the 60 and the 100-gallon soap tanks. soap tan
34、k shall have a 1-1/2 inch NPT globe shutoff valve and the .500-gallon soap tank shall have a 3-inch NPT globe shutoff valve, on ferrous metal legs, hot-dipped galvanized finish, of sufficient height so that the drawoff cock is a minimum of 14 inches above floor level. The tank shall also have a 3/8-
35、inch The 200-gallon The tank shall be mounted 3.5.7.1.3 Steam agitator. The steam agitator shall be of the jet type with sufficient openings to distribute the steam and reduce the resultant noise (see 4.4.2). The agitator shall be fabricated from brass. 3.5.8 Item 12 - Handcarts, shirt, garment, and
36、 bundle. The handcarts shall be type I, II, or III. 3.5.8.1 Type I. Shirt handcarts shall consist of four bins, each LO-1/2 5 1/4 inch wide by 18 2 1/2 inch deep, by 45-1/2 5 1 inch high. It shall be of all steel construction mounted on 3-inch swivel casters. A hinged locking-type grill 3-3/4 4- 1/2
37、 inch wide.shal1 be attached to each side of the front of each bin-in such a manner that it may be swung open for the unobstructed loading or unloading of shirts in each bin and can be closed and locked in the closed position to prevent shirts from falling out during transit. When in the open positi
38、on the grill shall 10 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-00-L-131K remain open until manually closed and lscked. be 66-1/2 + 1 inch high by 19 + 1/2 inch deep by 45 2 1 inch wide. unit shallbe of rigid construction, collapsible, or of kn
39、ockdown con- struction that is easily assembled. Overall dimensions shall The 3.5.8.1.1 Frame and body. The frame of the type I handcat shall be constructed of steel wire, rods, angles, pipe, or round tube and mounted on four casters, The body of the bins shall be made of steel wire. All joints, cro
40、ss wires, rods, angles, tube, and bin dividers shall be securely welded and there shall be no sharp edges which could damage shirts. when the handcart is all wire or rod construction, the two ends used for pushing the handcart shall be constructed so that the periphery of each end of the frame and b
41、ins is made of one continuous wire or rod. The two ends of the continuous piece of wire or rod shall terminate at any point other than the connection to the casters. l through the coating. 3.6.2 Welding and brazing. Electrodes or welding rods shall deposit material compatible with the base metal. we
42、lded or brazed shall be clean. Ai1 surfaces of parts to be Welding and brazing shall be accompliOhnA 14 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-00-L-131K in a manner which will prevent the occurrence of bum holes, cracks, fractures, or incomp
43、lete fusion. All scale and flux deposits shall be removed from finished welds. 3.6.3 Soldering. Soldering shall be complete and adherent with all flux and residue removed and shall contain no pinholes. 3.6.4 Threaded fasteners. Threaded fasteners shall not be broken, stripped, fractured, or loose. 3
44、.6.5 Rivets. Rivets shall be driven to completely fill the holes, with full size heads neatly finished and in full contact with the surface of the riveted members. 3.6.6 Electrical wiring. Wring shall not be cut, abraded, or have excessive insulation stripped, and shall be properly and tightly joine
45、d at terminals. Miring shall have adequate slack to provide strain relief. 3.6.7 Dimensions. Unless otherwise indicated, dimensions specified herein shall be held to a tolerance of plus or minus 10 percent. 4. QUALITY MSURANCE PROVISIONS 4.1 Responsibility for inspection. Unless otherwise specified
46、in the contract or purchase order, the supplier is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract or order, the supplier may use his om or any other facilities suitable for the performance of the inspection requiremen
47、ts specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the speci- fication where such inspections are deemed necessary to assure that supplies and services conform to prescribed requirements. 4.2 First article inspe
48、ction. When a first article is required it shall be examined for defects listed in table II, specified dimensions, and tested as specified in 4.4.1 through 4.4.3.2, as applicable. Tile presence of any visual defect, any dimension not within the specified requirements, or failure to pass all tests sh
49、all be cause for rejection of the first article. 4.3 Inspection. Sampling for inspection shall be performed in accordance with NIL-STD-105, except where otherwise indicated hereinafter. 4.3.1 Component and material inspection. In accordance with 4.1, com- ponents and materials shall be inspected and tested in accordance with all , the requirements of referenced specifications, drawings, and standards unless otherwise excluded, amended,
