1、PPP-T-6LD PA m 7777774 00376113 2 E Fed. Spec. PPP-T-681C August 10, 1970 EDERAL SPECIFICATION TAPE, GUMMED, PACKAGING AM, PACKIHG OF This specification was approved by the Commissioner, Federal Supply Service, General Services Administration, for the use of all Federal agencies, 1. SCOPE 1.1 Scope.
2、 This specification covers the requirements for the packaging and packing of gummed tapes. 2. APPLICABLE DOCUMENTS 2.1 The following documents of the issue in effect on date of invitation for bids or request for proposal, form a part of this specification to the extent specified herein: . Federal Sp
3、ecification: PPP-B-6 36 - Boxes, Shipping, Fiberboard. Federal Standard: FEI)-STD-123 - Marking for Domestic Shipment (Civil Agencies). (Activities outside the Federal Government my obtain copies of Federal Specifications, Standards, and Handbooks as outlined under General Information in the Index o
4、f Federal Specifications and Standards and at the prices indi- cated n the Index. The Index, which includes cumulative monthly supplements as issued, is for sale on a subscription basis by the Superintendent of Docu- ments, U.S. Government Printing Office, Washington, DC 20402. (Single copies of thi
5、s specification and other Federal specifications required by activities outside ehe Federal Government for bidding purposes are available without charge from Business Service Centers at the General Semices Administra- tion Regional Offices in Boston, New York, Washington, DC, Atlanta, Chicago, Kansa
6、s City, MO, Fort Worth, Denver, : :i Francisco, Los Angeles, and Seattle, Wasping ton . FSC-PACK THIS DOCUNEEIT CONTAINS 6 PAGFS. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-PPP-T-bLD PA 9 7777774 0037634 4 W lPI!-Y-68 li) (Federal Government act
7、ivities may obtain copies of Federal Specifications, Standards, and Handbooks and the Index of Federal Specifications and Standards from established distribution points in their agencies. ) Military Specification: ? . HIL-B-43666 - Boxes, Shipping Inserts Consolidation. Plilitary Standards: I MIL-ST
8、U-105 - Sampling Procedures and Tables for Inspection by NIL-STD-129 - Marking for Shipment and Storage. MIL-STD-147 - Palletized Unit Loads, For 40“ X 48“ Pallets. 4 Attributes. 1 (Copies of Military Specifications and Standards required by contractors in connection with specific procurement functi
9、ons sh6uld.be obtained from the procuring activity or asdirected by the contracting officer.) - 2.2 Other publications. The following documents form a part of thls specifi- cation to the extent specified herein. the issue in effect an ate of invitation for bids or request for proposal shall apply: U
10、nless a specific issue is identified, National Motor Freight Traffic Association, Inc., Agent National Motor Freight Classification (Application for copies should be addressed to the American Trucking Associa- tions, Inc., Tariff Order Section, 1616 R Strect, N.Y., Washington, DC 20036.) Uniform Cla
11、ssification Committee, Agent Uniform Freight Classification (Application for copies should be addressed to the Uniform ClasSification Cammittce, Room 1106, 222 South Riverside Plaza, Chicago, IL 60606.) U.S. Postal Service Manual (Application for copies should be adressed to the Superintendent of Do
12、cuments, U.S. Government Printing Office, Washlugton, DC 20402,) (Technical society and technical association specifications and standards are generally available for reference from libraries. among technical groups and using Federal agencies.) They are also distributed 2 Provided by IHSNot for Resa
13、leNo reproduction or networking permitted without license from IHS-,-,-PPP-T-b3D PA W 777977LI 0039635 b 3. REQUIREMENTS 3.1 Packaging. Packaging .-I shall be level A, B or C, as specified (see 6.2). 3,l.l Javel A, Rolls of tape, of the same specification, .type, class, and size and in the quantity
14、as specified (see 6.2) shall be packaged in a close- fitting clear polyethylene fflm bag having a thickness of 0.002-inch (+ 20 percent tolerance). straight, continuous and perpendicular to the adjacent formed edges of the bag. The bag may be fabricated from polyethylene film tubing or sheeti-ng. of
15、 the bag shall he accompl alminun band, etc.). Prior to or during the closure operation, excess air shall be expelled from the bag. Rolls of tape shall be packaged in accordance with 3.1.1 The bag shall be formed with heat sealed seams that are Closure 3.1.2 Level B. (see 6.2). 3.1.3 Level C (camner
16、cial packaging). Rolls of tape shall be packaged to afford adequate protection against physica1,damage during shipment from the supplier to the first receiving activity. The package and the quantity per package shall be the same as that normally used by the supplier for retail distribution. 3.2 Pack
17、irq. Packing shall be level A, B, or C, as specified (see 6.2). 3.2.1 Level A. Rolls of tape, of the same specification, type, class, and size, packaged as specified in 3.1, shall be packed in the quantities specified in table I, in a snug-fitting fiberboard shipping container conforming to style RS
18、C, grade VZs of PPP-B-636. with method III, waterproofed in accordance with method V, and reinforced as specified in the appendix of PPP-B-636. Each shipping container shall be closed in accordance 3.2.2 Level B. Rolls of tape; of. .the-aamr?_-specification, type, class, and size, packaged as specif
19、ied ia 3.1, shall be packed in the quantities specified in table.1, in a snug-fitting fiberboard shipping container conforming to style RSC, type CF (variety SW) or SF, class domestic, grade 275 of PPP-B-636. Each shipping container shall be closed in accordance with method II as specified in the ap
20、pendix of PPP-B-636 . TABLE I. Packing quantities Width of tape in inches No. of rolls per shipping container 5J8 3/4 1 48 40 30 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-PPP-T-6LD PA W 997977q 003963b PPP-T-681D TABLE I. Packing- qyantitiea
21、(contd) . Width of tape in,inches No. of rolls per shipping container 1-114 1-1 i 2 2 2-1/2 3 -4 5 9 24 20 ls 12 10 7 6 3.2.2.1 When specified (see 6.2), the fiberboard shipping container shall be a grade VC, VS, or V4s fiberboard box fabricated in accordance with PPP-B-636 and closed in accordance
22、with method III as specified in the appendix of the container specification. 3.2.3 Level C (commerical packing). Rolls of tape, packaged as specified in 3.1, shall be packed in a manner to insure carrier acceptance and safe delivery a; destination at the lowest transportation rate for such supplies.
23、 quantity per shipping container shall be the 8ame as that normally used by the supplier for retail distribution. Service Manual, Uniform Freight Classification Rules or National Motor Freight Classification Rules, as applicable. The Containers shall comply with US Postal 3.3 Containerization. When
24、specified (see 6.2), rolls of tape packed as specified in 3.2 shall be consolidated into a container conforming to type I, 11 or III, style and size optional of MIL-B-43666. When specified (see 6.2), rolls of tape of one description 3.4 Palletizatlon. only, packed as specified in 3.2, shall be pelle
25、tized in accordance with load type I of MIL-STD-147. Each prepared load shall be bonded with primary and secondary straps in accordance with bonding means K and L. Pallet patterns shall be in accordance with the appendix of MIL-STD-147. If the container is of a size which does not conform to any of
26、the pallet patterns specified in MIL-STD-147, the pallet pattern used shall first be approved by the contracting officer . 3.5 Marking. 3.5.1 Civil agencies. In addition to any special marking required by the contract or order, interior packages and shipping containers shall be marked in accordance
27、with FED-ST3-123. 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- PPP-T-681D PA 7977974 0037637 T PPP-T-68lD 3.5.2 Military requirements. the contract or order, Interior packages and shippbg containers shall be marked in accordance with MIL-STD-12
28、9. In addition to any special marking required by 3.5.3 Polyethylene bagged packages. Polyethylene bagged packages shall have the required identif lcailon information legibly printed or stamped In black directly on the bag across the center face or on a white paper label inserted within the bag so a
29、s to permit ready identification. 3.5.4 Precautionary marking. The following precautionary marking shall be included on two opposite sides of each shipping container: “STORE IN A COOL DRY PLACE. Do NOT REMOVE CONTENTS UNTIL READY FOR USE.“ In addition, each shipping container shall be marked with th
30、e word “UPuPi with an arrow toward the top of the container. 8. QUALITY ASSURANCE PROVISIONS 4.1 Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the supplier is responsible for the performance of all inspection requirements as specified herein. Except as
31、otherwise specified in the contract or order, the supplier may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government rtsewes the right to perform any of the inspections set forth in the s
32、pecification where such inspections are deemed necessary to assure supplie8 and aervices conform to prescribed requirements. 4.2 Inspection, Sampling for inspection shall be performed in accordauce with MIL-STD-105, except where othervise indicated hereinafter. 4.2.1 Component and naterial inspectio
33、n. In accordance with 4.1 components and materials shall be inspected and tested in accordance with all the requiremen of referenced specifications and standards unless otherwise excluded, amended, modified, or qualifsed in this specifieqtfon or applicable purchase document. 4.2.2 Exemination of the
34、 end item. 4.2.2,l Examination 6f the end item for packaging, packing, and marking. An examination shall be made to determine that the packaging, packing, and marking comply with the section 3 requirements. Defects shall be scored in accordance 5 Provided by IHSNot for ResaleNo reproduction or netwo
35、rking permitted without license from IHS-,-,-PPP-T-bBLD PA W 7777774 0037bL L with the list below. prepared for delivery with the exception that it need not beclosed. Dcfects of closure listed below shall be examined on shipping containers fully prepared for delivery. item faspection lot. 2.5, =pres
36、sed as defects per hundred units, The sample unit shal be 0% sh incorrect; illegible; of improper size, location, sequence or method of application. 5. PREPARATION FOR DELIVEXY (not applicable) 6. NOTES 6.1 Intended use. This document ia intended for use in packaging and packing gumied tapes. 6.2 Or
37、dering data. Purchasers should select the preferred options permitted herein and Include the following information in procurement documents: Title, number, and date of this specification. Selection of applicable levels of packaging and packing (see 3.1 Quantity required (see 3.1.1). When weather-res
38、istant grade fiberboard shipping containers are required for :level B packing (see 3 . 2 . 2.1) . When containerization i5 required (see 3.3). When palletization Is required (see 3.4). When level B packaging is required for civil agencies (see 3.1.2). Marking requirements (see 3.5) . and 3.2)e 6.3 S
39、torage. The tape should be stored in the original container, preferably ln a cool location. radlators, or other sources of heat. relative hunidlty of 40 to 50 percent are most desirable. It should not be stored in close proximity to steampipes, Temperature of approxlmately 70 F. and 7 Provided by IH
40、SNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- PPP-T-bLD PA 9999974 0037620 T W Custodians: Army - m Navy - SA Air Force - 84 Review activities: Amy - SM Navy - AS Air Force - 69 DSA-GS . .-.-.-.m . User activities: Preparing activity: I. Amy - GL Civil Agency C
41、oordinating Activities: USDA-AMs DC Govt-DCG HEW-FEC INTERIOR- BU4 JUSTICE-FPI VA-DMS GSA-FSS Project No. PACK-0405 Amy - MU Navy - MC, YD, OS U. S. GOVERNMENT PRINTING OFFICE : 1974 O - 544-608/1578 Orders for this publkation are to be placed with General Services Administration, acting as an agent for the Superintendent of Documente. See section 2 of this specification to obtain extra copies and other docments referericed herein. Price 15 cents each. . 8 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
