1、*USACE / NAVFAC / AFCESA / NASA UFGS-23 00 00 (August 2010)-Preparing Activity: USACE SupersedingUFGS-23 00 00 (November 2009)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated July 2010*SECTION TABLE OF CONTENTSDIVISION 23 - HEATING, VENTILATING, AND AIR CONDITIONING
2、SECTION 23 00 00AIR SUPPLY, DISTRIBUTION, VENTILATION, AND EXHAUST SYSTEMS08/10PART 1 GENERAL1.1 REFERENCES1.2 SYSTEM DESCRIPTION1.2.1 Mechanical Equipment Identification1.2.1.1 Charts1.2.1.2 Diagrams1.2.2 Service Labeling1.2.3 Color Coding1.3 SUBMITTALS1.4 QUALITY ASSURANCE1.4.1 Prevention of Corro
3、sion1.4.2 Asbestos Prohibition1.4.3 Ozone Depleting Substances Used as Refrigerants1.4.4 Use of Ozone Depleting Substances, Other than Refrigerants1.4.5 Detail Drawings1.4.6 Test Procedures1.4.7 Sustainable Design Certification1.5 DELIVERY, STORAGE, AND HANDLINGPART 2 PRODUCTS2.1 STANDARD PRODUCTS2.
4、2 STANDARD PRODUCTS2.3 IDENTIFICATION PLATES2.4 EQUIPMENT GUARDS AND ACCESS2.5 ELECTRICAL WORK2.6 ANCHOR BOLTS2.7 SEISMIC ANCHORAGE2.8 PAINTING2.9 INDOOR AIR QUALITY2.10 DUCT SYSTEMS2.10.1 Metal Ductwork2.10.1.1 Metallic Flexible Duct2.10.1.2 Insulated Nonmetallic Flexible Duct Runouts2.10.1.3 Gener
5、al Service Duct ConnectorsSECTION 23 00 00 Page 1Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-2.10.1.4 High Temperature Service Duct Connections2.10.1.5 Aluminum Ducts2.10.1.6 Copper Sheets2.10.1.7 Corrosion Resisting (Stainless) Steel Sheets2.10.
6、2 Duct Access Doors2.10.3 Fire Dampers2.10.4 Manual Balancing Dampers2.10.5 Manual Balancing Dampers2.10.5.1 Square or Rectangular Dampers2.10.5.2 Round Dampers2.10.6 Automatic Balancing Dampers2.10.7 Automatic Smoke-Fire Dampers2.10.8 Automatic Smoke Dampers2.10.9 Air Supply And Exhaust Air Dampers
7、2.10.10 Air Deflectors and Branch Connections2.10.11 Plenums and Casings for Field-Fabricated Units2.10.11.1 Plenum and Casings2.10.11.2 Casing2.10.11.3 Access Doors2.10.11.4 Factory-Fabricated Insulated Sheet Metal Panels2.10.11.5 Duct Liner2.10.12 Sound Attenuation Equipment2.10.13 Diffusers, Regi
8、sters, and Grilles2.10.13.1 Diffusers2.10.13.2 Perforated Plate Diffusers2.10.13.3 Linear Diffusers2.10.13.4 Security Ceiling Diffusers2.10.13.5 Registers and Grilles2.10.13.6 Registers2.10.13.7 Security Supply Air Registers Except in Cells2.10.13.8 Security Return and Other Air Registers Except in
9、Cells2.10.13.9 Security Supply Air Registers in Cells2.10.13.10 Security Return and Other Type Air Registers in Cells2.10.14 Louvers2.10.15 Air Vents, Penthouses, and Goosenecks2.10.16 Bird Screens and Frames2.10.17 Radon Exhaust Ductwork2.11 AIR SYSTEMS EQUIPMENT2.11.1 Fans2.11.1.1 Centrifugal Fans
10、2.11.1.2 In-Line Centrifugal Fans2.11.1.3 Axial Flow Fans2.11.1.4 Panel Type Power Wall Ventilators2.11.1.5 Centrifugal Type Power Wall Ventilators2.11.1.6 Centrifugal Type Power Roof Ventilators2.11.1.7 Propeller Type Power Roof Ventilators2.11.1.8 Air-Curtain Fans2.11.1.9 Ceiling Exhaust Fans2.11.
11、2 Coils2.11.2.1 Direct-Expansion Coils2.11.2.2 Water Coils2.11.2.3 Steam Heating Coils2.11.2.4 Steam Preheat (Nonfreeze) Coils2.11.2.5 Electric Heating Coil2.11.2.6 Eliminators2.11.2.7 Sprayed Coil Dehumidifiers2.11.2.8 Corrosion Protection for Coastal Installations2.11.3 Air Filters2.11.3.1 Extende
12、d Surface Pleated Panel FiltersSECTION 23 00 00 Page 2Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-2.11.3.2 Extended Surface Nonsupported Pocket Filters2.11.3.3 Cartridge Type Filters2.11.3.4 Sectional Cleanable Filters2.11.3.5 Replaceable Media F
13、ilters2.11.3.6 Automatic Renewable Media Filters2.11.3.7 Electrostatic Filters2.11.3.8 High-Efficiency Particulate Air (HEPA) Filters2.11.3.9 Holding Frames2.11.3.10 Filter Gauges2.12 AIR HANDLING UNITS2.12.1 Field-Fabricated Air Handling Units2.12.2 Factory-Fabricated Air Handling Units2.12.2.1 Cas
14、ings2.12.2.2 Heating and Cooling Coils2.12.2.3 Air Filters2.12.2.4 Fans2.12.2.5 Access Sections and Filter/Mixing Boxes2.12.2.6 Diffuser Sections2.13 TERMINAL UNITS2.13.1 Room Fan-Coil Units2.13.1.1 Enclosures2.13.1.2 Fans2.13.1.3 Coils2.13.1.4 Drain Pans2.13.1.5 Manually Operated Outside Air Damper
15、s2.13.1.6 Filters2.13.1.7 Motors2.13.2 Coil Induction Units2.13.2.1 Enclosures2.13.2.2 Air Plenums2.13.2.3 Coils2.13.2.4 Screens2.13.2.5 Drain Pan2.13.3 Variable Air Volume (VAV) and Dual Duct Terminal Units2.13.3.1 Constant Volume, Single Duct Terminal Units2.13.3.2 Variable Volume, Single Duct Ter
16、minal Units2.13.3.3 Variable Volume, Single Duct, Fan-Powered Terminal Units2.13.3.4 Dual Duct Terminal Units2.13.3.5 Ceiling Induction Terminal Units2.13.3.6 Series Fan Powered Variable Air Volume (VAV) Terminals2.13.3.7 Reheat Units2.13.4 Unit Ventilators2.13.4.1 Enclosures2.13.4.2 Electric Resist
17、ance Heating Elements2.13.4.3 Fans2.13.4.4 Coils2.13.4.5 Drain Pans2.13.4.6 Filters2.13.4.7 Dampers2.13.4.8 Motors2.13.4.9 Outside Air Intakes2.14 ENERGY RECOVERY DEVICES2.14.1 Rotary Wheel2.14.2 Run-Around-Coil2.14.3 Heat Pipe2.14.4 Desiccant Wheel2.14.5 Plate Heat Exchanger2.15 FACTORY PAINTING2.1
18、6 SUPPLEMENTAL COMPONENTS/SERVICESSECTION 23 00 00 Page 3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-2.16.1 Chilled, Condenser, or Dual Service Water Piping2.16.2 Refrigerant Piping2.16.3 Water or Steam Heating System Accessories2.16.4 Condensate
19、 Drain Lines2.16.5 Backflow Preventers2.16.6 Insulation2.16.7 ControlsPART 3 EXECUTION3.1 EXAMINATION3.2 INSTALLATION3.2.1 Condensate Drain Lines3.2.2 Equipment and Installation3.2.3 Access Panels3.2.4 Flexible Duct3.2.5 Metal Ductwork3.2.5.1 Underground Ductwork3.2.5.2 Radon Exhaust Ductwork3.2.5.3
20、 Light Duty Corrosive Exhaust Ductwork3.2.6 FRP Ductwork3.2.7 Kitchen Exhaust Ductwork3.2.7.1 Ducts Conveying Smoke and Grease Laden Vapors3.2.7.2 Exposed Ductwork3.2.7.3 Concealed Ducts Conveying Moisture Laden Air3.2.8 Acoustical Duct Lining3.2.9 Dust Control3.2.10 Insulation3.2.11 Duct Test Holes
21、3.2.12 Power Roof Ventilator Mounting3.2.13 Power Transmission Components Adjustment3.3 EQUIPMENT PADS3.4 CUTTING AND PATCHING3.5 CLEANING3.6 PENETRATIONS3.7 FIELD PAINTING OF MECHANICAL EQUIPMENT3.7.1 Finish Painting3.7.2 Color Coding Scheme for Locating Hidden Utility Components3.8 IDENTIFICATION
22、SYSTEMS3.9 DUCTWORK LEAK TEST3.10 DUCTWORK LEAK TESTS3.11 DAMPER ACCEPTANCE TEST3.12 TESTING, ADJUSTING, AND BALANCING3.13 PERFORMANCE TESTS3.14 CLEANING AND ADJUSTING3.15 OPERATION AND MAINTENANCE3.15.1 Operation and Maintenance Manuals3.15.2 Operation And Maintenance Training- End of Section Table
23、 of Contents -SECTION 23 00 00 Page 4Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-*USACE / NAVFAC / AFCESA / NASA UFGS-23 00 00 (August 2010)-Preparing Activity: USACE SupersedingUFGS-23 00 00 (November 2009)UNIFIED FACILITIES GUIDE SPECIFICATIONS
24、References are in agreement with UMRL dated July 2010*SECTION 23 00 00AIR SUPPLY, DISTRIBUTION, VENTILATION, AND EXHAUST SYSTEMS08/10*NOTE: This guide specification covers the requirements for air supply, distribution, ventilation, and exhaust portions of an HVAC system.Edit this guide specification
25、 for project specific requirements by adding, deleting, or revising text. For bracketed items, choose applicable items(s) or insert appropriate information.Remove information and requirements not required in respective project, whether or not brackets are present.Comments and suggestions on this gui
26、de specification are welcome. Direct them to the technical proponent of the specification. A listing of technical proponents, including their organization designation and telephone number, is on the Internet.Submit recommended changes to a UFGS as a Criteria Change Request (CCR).*PART 1 GENERAL*NOTE
27、: Coordinate the use of this specification with other sections, as appropriate, in order to specify a complete HVAC built-up system.*1.1 REFERENCES*NOTE: This paragraph is used to list the publications cited in the text of the guide specification. The publications are referred to in the text by basi
28、c designation only and listed in this paragraph by organization, designation, date, SECTION 23 00 00 Page 5Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-and title.Use the Reference Wizards Check Reference feature when you add a RID outside of the S
29、ections Reference Article to automatically place the reference in the Reference Article. Also use the Reference Wizards Check Reference feature to update the issue dates.References not used in the text are automatically deleted from this section of the project specification when you choose to reconc
30、ile references in the publish print process.*The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.ACOUSTICAL SOCIETY OF AMERICA (ASA)ASA S12.51 (2002) Acoustics Determination of Sound
31、Power Levels of Noise Sources using Sound Pressure Precision Method for Reverberation RoomsAIR CONDITIONING CONTRACTORS OF AMERICA (ACCA)ACCA Manual 4 (2001) Installation Techniques for Perimeter Heating 11th EditionAIR MOVEMENT AND CONTROL ASSOCIATION INTERNATIONAL (AMCA)AMCA 201 (2002) Fans and Sy
32、stemsAMCA 210 (2007) Laboratory Methods of Testing Fans for Aerodynamic Performance RatingAMCA 220 (2005) Test Methods for Air Curtain UnitsAMCA 300 (2008) Reverberant Room Method for Sound Testing of FansAMCA 301 (2006; INT 2007; Errata 2008) Methods for Calculating Fan Sound Ratings from Laborator
33、y Test DataAMCA 500-D (1998) Laboratory Methods of Testing Dampers for RatingAIR-CONDITIONING, HEATING AND REFRIGERATION INSTITUTE (AHRI)AHRI 260 (2001; Addendum 2002) Sound Rating of Ducted Air Moving and Conditioning EquipmentAHRI 350 (2009) Sound Rating of Non-Ducted Indoor Air-Conditioning Equip
34、mentSECTION 23 00 00 Page 6Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AHRI 410 (2001; Addendum 2002) Forced-Circulation Air-Cooling and Air-Heating CoilsAHRI 430 (2009) Central-Station Air-Handling UnitsAHRI 440 (2008) Room Fan-Coils and Unit Ve
35、ntilatorsAHRI 880 (2008) Performance Rating of Air TerminalsAHRI 885 (2008) Procedure for Estimating Occupied Space Sound Levels in the Application of Air Terminals and Air OutletsAHRI DCAACP (Online) Directory of Certified Applied Air-Conditioning ProductsAHRI Guideline D (1996) Application and Ins
36、tallation of Central Station Air-Handling UnitsAMERICAN BEARING MANUFACTURERS ASSOCIATION (ABMA)ABMA 11 (1990; R 1999) Load Ratings and Fatigue Life for Roller BearingsABMA 9 (1990; R 2008) Load Ratings and Fatigue Life for Ball BearingsAMERICAN SOCIETY OF HEATING, REFRIGERATING AND AIR-CONDITIONING
37、 ENGINEERS (ASHRAE)ANSI/ASHRAE 15 Std 15 Errata 2007, 2009, Std 34 Errata 2007, 2008, Addenda a-v, x-ae) ANSI/ASHRAE Standard 15-Safety Standard for Refrigeration Systems and ANSI/ASHRAE Standard 34-Designation and Safety Classification of RefrigerantsASHRAE 52.2 (2007; Addenda b 2008; Errata 2009)
38、Method of Testing General Ventilation Air-Cleaning Devices for Removal Efficiency by Particle SizeASHRAE 62.1 (2007; Errata 2007; Errata 2008; Addenda a, b, e, f, h 2008; Errata 2009; Errata 2010) Ventilation for Acceptable Indoor Air QualityASHRAE 68 (1997) Laboratory Method of Testing to Determine
39、 the Sound Power In a DuctASHRAE 70 (2006) Method of Testing for Rating the Performance of Air Outlets and InletsASHRAE 84 (2008) Method of Testing Air-to-Air Heat ExchangersASHRAE 90.1 - IP (2007; Supplement 2008; Addenda r 2009) Energy Standard for Buildings Except Low-Rise Residential BuildingsSE
40、CTION 23 00 00 Page 7Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ASHRAE 90.1 - SI (2007; Supplement 2008; Errata 2009; Errata 2009; INT 1-3 2009) Energy Standard for Buildings Except Low-Rise Residential BuildingsASME INTERNATIONAL (ASME)ASME A13
41、.1 (2007) Scheme for the Identification of Piping SystemsASTM INTERNATIONAL (ASTM)ASTM A 123/A 123M (2009) Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel ProductsASTM A 167 (1999; R 2009) Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel P
42、late, Sheet, and StripASTM A 53/A 53M (2007) Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and SeamlessASTM A 924/A 924M (2009a) Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip ProcessASTM B 117 (2009) Standing Pract
43、ice for Operating Salt Spray (Fog) ApparatusASTM B 152/B 152M (2009) Standard Specification for Copper Sheet, Strip, Plate, and Rolled BarASTM B 209 (2007) Standard Specification for Aluminum and Aluminum-Alloy Sheet and PlateASTM B 209M (2007) Standard Specification for Aluminum and Aluminum-Alloy
44、Sheet and Plate (Metric)ASTM B 280 (2008) Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field ServiceASTM B 766 (1986; R 2008) Standard Specification for Electrodeposited Coatings of CadmiumASTM C 1071 (2005e1) Standard Specification for Fibrous Glass Duct Li
45、ning Insulation (Thermal and Sound Absorbing Material)ASTM C 553 (2008) Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial ApplicationsASTM C 916 (1985; R 2007) Standard Specification for Adhesives for Duct Thermal InsulationSECTION 23 00 00 Page 8Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ASTM D 1654 (2008) Evaluation of Painted or Coated Specimens Subjected to Corrosive EnvironmentsASTM D 1785 (2006) Standard Specification for Poly(Vinyl Chlo
