1、*USACE / NAVFAC / AFCESA / NASA UFGS-27 05 29.00 10 (August 2011)-Preparing Activity: USACE NewUNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated October 2011*SECTION TABLE OF CONTENTSDIVISION 27 - COMMUNICATIONSSECTION 27 05 29.00 10PROTECTIVE DISTRIBUTION SYSTEM (PD
2、S) FOR SIPRNET COMMUNICATION SYSTEMS08/11PART 1 GENERAL1.1 RELATED REQUIREMENTS1.2 REFERENCES1.3 ADMINISTRATIVE REQUIREMENTS1.3.1 Conditions1.3.2 Construction Methods1.3.3 PDS Design1.3.4 PDS Design Technical Review1.3.5 PDS Design Approval Request1.4 SUBMITTALS1.5 QUALITY ASSURANCE1.5.1 Manufacture
3、rs Qualifications1.5.2 Installers Qualifications1.5.3 Equipment1.6 DELIVERY, STORAGE, AND HANDLINGPART 2 PRODUCTS2.1 PDS CARRIER CONFIGURATION2.1.1 Secure Raceway Carrier2.1.1.1 Fittings and Components2.1.1.2 Mounting Accessories2.1.1.3 Through Wall Penetrating2.1.1.4 Pull Points2.1.2 Conduit Carrie
4、r2.1.2.1 Conduit2.1.2.2 Mounting Brackets2.1.2.3 Fittings2.1.2.4 Through Wall Penetrating2.1.2.5 Pull Points2.2 USER DROP BOX2.3 ENCLOSURESPART 3 EXECUTION3.1 EXAMINATIONSECTION 27 05 29.00 10 Page 1Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-3.2
5、 PDS CARRIER ROUTING3.2.1 General3.2.2 Distribution Topology3.2.3 Mounting Location Considerations3.2.4 Adjacent Infrastructure Considerations3.3 INSTALLATION3.3.1 Mounting PDS Carrier3.3.2 Enclosures3.3.2.1 User Drop Box (UDB)3.3.2.2 Other Enclosures3.3.3 Mechanical Security3.3.4 Carrier Support3.4
6、 FIELD QUALITY ASSURANCE3.4.1 Physical Inspection3.4.2 Magnetic Test3.5 CLEANING AND PROTECTION- End of Section Table of Contents -SECTION 27 05 29.00 10 Page 2Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-*USACE / NAVFAC / AFCESA / NASA UFGS-27 05
7、 29.00 10 (August 2011)-Preparing Activity: USACE NewUNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated October 2011*SECTION 27 05 29.00 10PROTECTIVE DISTRIBUTION SYSTEM (PDS) FOR SIPRNET COMMUNICATION SYSTEMS08/11*NOTE: This guide specification covers the requirement
8、s for a protective distribution system used in conjunction with SIPRNET communication systems.Adhere to UFC 1-300-02 Unified Facilities Guide Specifications (UFGS) Format Standard when editing this guide specification or preparing new project specification sections. Edit this guide specification for
9、 project specific requirements by adding, deleting, or revising text. For bracketed items, choose applicable items(s) or insert appropriate information.Remove information and requirements not required in respective project, whether or not brackets are present.Comments, suggestions and recommended ch
10、anges for this guide specification are welcome and should be submitted as a Criteria Change Request (CCR).*PART 1 GENERAL1.1 RELATED REQUIREMENTS1.2 REFERENCES*NOTE: This paragraph is used to list the publications cited in the text of the guide specification. The publications are referred to in the
11、text by basic designation only and listed in this paragraph by organization, designation, date, and title.Use the Reference Wizards Check Reference feature when you add a RID outside of the Sections Reference Article to automatically place the reference in the Reference Article. Also use the SECTION
12、 27 05 29.00 10 Page 3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Reference Wizards Check Reference feature to update the issue dates.References not used in the text will automatically be deleted from this section of the project specification whe
13、n you choose to reconcile references in the publish print process.*The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)ANSI C80.3 (
14、2005) American National Standard for Electrical Metallic Tubing (EMT)NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)NFPA 70 (2011; TIA 11-1; Errata 2011) National Electrical CodeNATIONAL SECURITY TELECOMMUNICATIONS AND INFORMATION SYSTEMS SECURITY (NSTISS)NSTISSAM TEMPEST/2-95 (1995; Am A 2000) RED/BLAC
15、K Installation GuidanceNSTISSI-7003 (1996) Protective Distribution Systems (PDS)TELECOMMUNICATIONS INDUSTRY ASSOCIATION (TIA)TIA-569 (2004b; Add 1 2009) Commercial Building Standard for Telecommunications Pathways and Spaces1.3 ADMINISTRATIVE REQUIREMENTS1.3.1 ConditionsNotify the Contracting Office
16、r if it is impossible to install SIPRNET PDS that complies with this section and references.1.3.2 Construction MethodsMethods of construction that are not specifically described or indicated in the Contract will be subject to the control and approval of the Contracting Officer.1.3.3 PDS DesignInclud
17、e separate plans, elevations, sections, details, and attachments to other work. Indicate PDS carrier route, PDS carrier mounting height above finished floor, user drop box mounting height, and user drop box locations. Submit the PDS design to the cognizant Central TEMPEST Technical Authority (CTTA),
18、 for a technical review prior to the acquisition of material, through the installation Network Enterprise Center (NEC) or SECTION 27 05 29.00 10 Page 4Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Directorate of Information Management (DOIM).1.3.4
19、PDS Design Technical ReviewCoordinate with the installation NEC/DOIM and submit PDS design for technical review to CTTA. Provide PDS carrier shop drawings, List of Material (LOM), and any other documentation required 90-days prior to PDS carrier installation (see NSTISSI-7003, Appendix C).1.3.5 PDS
20、Design Approval RequestPDS design approving authority is the installation NEC/DOIM Designated Approving Authority (DAA). Submit PDS design and CTTA technical review to the installation NEC/DOIM to obtained PDS design approval from the DAA prior to installation.1.4 SUBMITTALS*NOTE: Review Submittal D
21、escription (SD) definitions in Section 01 33 00 SUBMITTAL PROCEDURES and edit the following list to reflect only the submittals required for the project. Submittals should be kept to the minimum required for adequate quality control.A “G” following a submittal item indicates that the submittal requi
22、res Government approval. Some submittals are already marked with a “G”. Only delete an existing “G” if the submittal item is not complex and can be reviewed through the Contractors Quality Control system. Only add a “G” if the submittal is sufficiently important or complex in context of the project.
23、For submittals requiring Government approval on Army projects, a code of up to three characters within the submittal tags may be used following the “G“ designation to indicate the approving authority. Codes for Army projects using the Resident Management System (RMS) are: “AE“ for Architect-Engineer
24、; “DO“ for District Office (Engineering Division or other organization in the District Office); “AO“ for Area Office; “RO“ for Resident Office; and “PO“ for Project Office. Codes following the “G“ typically are not used for Navy, Air Force, and NASA projects.Choose the first bracketed item for Navy,
25、 Air Force and NASA projects, or choose the second bracketed item for Army projects.*Government approval is required for submittals with a “G“ designation; submittals not having a “G“ designation are for Contractor Quality Control approval. information only. When used, a designation following the “G
26、“ designation identifies the office that will review the submittal for the Government. Submit the following in accordance with Section 01 33 00 SUBMITTAL PROCEDURES:SECTION 27 05 29.00 10 Page 5Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SD-02 Sh
27、op DrawingsPDS design; G; G, _PDS Design Technical Review; G; G, _PDS Design Approval; G; G, _SD-03 Product DataPDS Hardened CarrierSD-04 SamplesPDS Carrier Surface MountedPull BoxesFittingsSD-11 Closeout SubmittalsUser Drop BoxOther Enclosures1.5 QUALITY ASSURANCE1.5.1 Manufacturers QualificationsU
28、se firms regularly engaged in manufacture of secure raceway systems, boxes, and fittings of the types and sizes required, whose products have been in satisfactory use in similar service for not less than 3 years.1.5.2 Installers QualificationsInstaller is required to obtain certification from the ma
29、nufacturer of secure raceway system and install secure raceway system in accordance with manufacturers instructions.1.5.3 EquipmentPDS Hardened Carrier shall meet or exceed guidelines as defined by NSTISSI-7003 and shall be approved for use by DHS, U.S. Army, U.S. Marine Corps, U.S. Navy, and U.S. A
30、ir Force. Submit manufacturers descriptive data.1.6 DELIVERY, STORAGE, AND HANDLINGDeliver secure raceways, conduit, fittings and components in factory labeled packages. Store and handle in strict compliance with manufacturers written instructions and recommendations. Protect from damage due to weat
31、her, excessive temperature, and construction operations.PART 2 PRODUCTS2.1 PDS CARRIER CONFIGURATION*NOTE: Secure Raceway carrier system shall be used in office environments, for SIPRNET PDS, unless the installation NEC/DOIM specifically specifies a Conduit Carrier system. Conduit carrier may be use
32、d in non-office environments, such as hangars, SECTION 27 05 29.00 10 Page 6Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-maintenance facilities, warehouse, BCTC, etc.*Use secure raceway carrier system in office environments, Use conduit carrier in
33、 Non-office environments, such as hangars, maintenance facilities, warehouse, training areas, industrial areas.2.1.1 Secure Raceway CarrierProvide secure raceway, fittings and components manufactured from ferrous material. Submit three 150 mm 6-inch lengths of exposed type PDS carrier surface mounte
34、d conduit material, including component and fitting samples from the manufacturer, along with a LOM to the NEC/DOIM. Show finishes available (if applicable). PDS carrier that is comprised of Secure Raceway systems shall be:a. Square or rectangular design with removable top covers or solid constructi
35、onb. 50 by 50 mm 2 by 2 inch raceway50 by 100 mm2 by 4 inch raceway for horizontal backbone and vertical riser runsc. 25 by 25 mm 1 by 1 inch12 by 25 mm1/2 by 1 inch raceway for vertical user drops from horizontal backboned. Utilize elbows, couplings, fittings and connectors constructed from the sam
36、e type of ferrous material as the secure racewaye. Do not exceed 70 percent cable fill capacity of secure raceway with removable top cover in horizontal runs. TIA-569 cable fill standards do not apply.f. Do not exceed 60 percent fill capacity of secure raceway of solid construction. TIA-569 cable fi
37、ll standards do not apply.2.1.1.1 Fittings and ComponentsFittings and components include flat internal and external elbows, tees, couplings for joining raceway sections, nipples, wire clips, blank end fittings, and device mounting brackets and plates as applicable. Provide full capacity corner elbow
38、s and fittings to maintain a controlled 50 mm 2-inch cable bend radius that meet the TIA-569 specification for Fiber Optic and UTP cabling and exceeding the requirements for communications pathways.2.1.1.2 Mounting AccessoriesMount secure raceways to the wall partition using 25 mm 1-inch stand-off m
39、ounting brackets or spacers. Do not mount the secure raceways flush with the wall partition.2.1.1.3 Through Wall Penetratinga. Use trim plates threaded rigid pipe and locking rings on both the inside and outside of the raceway to secure the thru-wall penetration.b. Provide dielectric breaks when pen
40、etrating secure room wall partitions.c. Seal space between wall partition and through wall penetration using SECTION 27 05 29.00 10 Page 7Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-fire-stop material.d. Fire-stop vertical risers and through wall
41、 penetrations of fire rated wall partitions after pulling cabling. Annotate firewall penetrations on PDS design.2.1.1.4 Pull Pointsa. Provide a pull point for secure raceway with removable top cover every 270 degree change in direction. Provide additional pull points in accordance with the manufactu
42、rers instructions.b. Provide a pull point for secure raceway of solid construction every 180 degree change in direction. Provide additional pull points in accordance with the manufacturers instructions.2.1.2 Conduit CarrierProvide electrical metallic tubing (EMT) manufactured from ferrous material t
43、hat meets ANSI C80.3. Use fittings, couplers, and connectors manufactured from ferrous material. Use of EMT, fittings, couplers, and connectors construction from non-ferrous material is not acceptable. TIA-569 cable fill standards do not apply. Do not exceed 60 percent cable fills capacity in horizo
44、ntal or vertical runs.2.1.2.1 ConduitUse 25 50 75 100 mm 1 2 3 4-inch EMT conduit for horizontal backbone or vertical riser runs; 19 25 mm 3/4 1-inch EMT conduit for vertical runs from horizontal runs to secure user drop box. Use components (e.g. couplers, connectors, condulette, fittings, pull boxe
45、s, enclosures) constructed from ferrous metallic material. Use of components constructed from non-ferrous metallic material is not acceptable.2.1.2.2 Mounting BracketsSurface mount PDS conduit carrier on interior walls using 12 25 mm 1/2 1-inch stand-off mounting brackets. Use of non-metallic pipe hangers is acceptable to mount PDS conduit carrier to wall partitions.2.1.2.3 Fittings*NOTE: Cond
