1、*USACE / NAVFAC / AFCESA / NASA UFGS-28 31 64.00 10 (August 2009)-Preparing Activity: USACE SupersedingUFGS-28 31 64.00 10 (November 2008)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated July 2009*SECTION TABLE OF CONTENTSDIVISION 28 - ELECTRONIC SAFETY AND SECURITY
2、SECTION 28 31 64.00 10FIRE DETECTION AND ALARM SYSTEM, ADDRESSABLE08/09PART 1 GENERAL1.1 REFERENCES1.2 SYSTEM DESCRIPTION1.2.1 Operation1.2.2 Operational Features1.2.3 Alarm Functions1.2.4 Primary Power1.2.5 Battery Backup Power1.2.6 Interface With Existing Fire Alarm Equipment1.2.7 Interface With o
3、ther Equipment1.3 SUBMITTALS1.4 QUALITY ASSURANCE1.4.1 Qualifications1.4.1.1 Engineer and Technician1.4.1.2 Installer1.4.1.3 Fire Protection Engineer1.4.2 Detail Drawings1.5 TECHNICAL DATA AND COMPUTER SOFTWARE1.6 DELIVERY, STORAGE, AND HANDLING1.7 SPECIAL TOOLS AND SPARE PARTSPART 2 PRODUCTS2.1 STA
4、NDARD PRODUCTS2.2 NAMEPLATES2.3 CONTROL PANEL2.3.1 Remote System Audible/Visual Display2.3.2 Circuit Connections2.3.3 System Expansion and Modification Capabilities2.3.4 Addressable Control Module2.3.5 Addressable Initiating Device Circuits Module2.4 STORAGE BATTERIES2.5 BATTERY CHARGER2.6 ADDRESSAB
5、LE MANUAL FIRE ALARM STATIONS2.7 FIRE DETECTING DEVICESSECTION 28 31 64.00 10 Page 1Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-2.7.1 Heat Detectors2.7.1.1 Combination Fixed-Temperature and Rate-of-Rise Detectors2.7.1.2 Rate Compensating Detector
6、s2.7.1.3 Fixed Temperature Detectors2.7.2 Smoke Detectors2.7.2.1 Ionization Detectors2.7.2.2 Photoelectric Detectors2.7.2.3 Projected Beam Smoke Detectors2.7.2.4 Duct Detectors2.7.3 Combination Smoke and Heat Detectors2.7.4 Flame Detectors2.7.4.1 Infrared (IR) Single Frequency Flame Detector2.7.4.2
7、Infrared (IR) Dual Frequency Flame Detector2.7.4.3 Ultraviolet (UV) Flame Detectors2.7.4.4 Combination UV/IR Flame Detector2.8 NOTIFICATION APPLIANCES2.8.1 Alarm Bells2.8.2 Alarm Horns2.8.3 Chimes2.8.4 Visual Notification Appliances2.8.5 Combination Audible/Visual Notification Appliances2.8.6 Voice
8、Evacuation System2.9 FIRE DETECTION AND ALARM SYSTEM PERIPHERAL EQUIPMENT2.9.1 Electromagnetic Door Hold-Open Devices2.9.2 Conduit2.9.3 Wiring2.10 TRANSMITTERS2.10.1 Radio Alarm Transmitters2.10.1.1 Transmitter Power Supply2.10.1.2 Radio Alarm Transmitter Housing2.10.1.3 Antenna2.10.2 Master Fire Al
9、arm Boxes2.10.3 Telephonic Reporting SystemPART 3 EXECUTION3.1 EXAMINATION3.2 INSTALLATION3.2.1 Power Supply for the System3.2.2 Wiring3.2.3 Control Panel3.2.4 Detectors3.2.5 Notification Appliances3.2.6 Annunciator Equipment3.2.7 Addressable Initiating Device Circuits Module3.2.8 Addressable Contro
10、l Module3.3 OVERVOLTAGE AND SURGE PROTECTION3.3.1 Power Line Surge Protection3.3.2 Low Voltage DC Circuits Surge Protection3.3.3 Signal Line Circuit Surge Protection3.4 GROUNDING3.5 SUPERVISING STATION PROVISIONS3.5.1 Revisions to Existing Facilities3.5.2 Additions to Existing Facilities3.6 TRAINING
11、3.7 TESTING3.7.1 Preliminary Tests3.7.2 Acceptance TestSECTION 28 31 64.00 10 Page 2Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- End of Section Table of Contents -SECTION 28 31 64.00 10 Page 3Provided by IHSNot for ResaleNo reproduction or networ
12、king permitted without license from IHS-,-,-*USACE / NAVFAC / AFCESA / NASA UFGS-28 31 64.00 10 (August 2009)-Preparing Activity: USACE SupersedingUFGS-28 31 64.00 10 (November 2008)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated July 2009*SECTION 28 31 64.00 10FIR
13、E DETECTION AND ALARM SYSTEM, ADDRESSABLE08/09*NOTE: This guide specification covers the requirements for fire detection and alarm systems, addressable systems.Edit this guide specification for project specific requirements by adding, deleting, or revising text. For bracketed items, choose applicabl
14、e items(s) or insert appropriate information.Remove information and requirements not required in respective project, whether or not brackets are present.Comments and suggestions on this guide specification are welcome and should be directed to the technical proponent of the specification. A listing
15、of technical proponents, including their organization designation and telephone number, is on the Internet.Recommended changes to a UFGS should be submitted as a Criteria Change Request (CCR).*PART 1 GENERAL*NOTE: A smoke detector should be shown on the drawings per NFPA 72, paragraph 1-5.6. The fol
16、lowing information, should be on the project drawings:1. On electrical floor plans, show location of control panel, batteries and charger, transmitter, annunciator, primary power supply, remote trouble device, remote annunciator, detectors, notification appliances, and each alarm initiating device i
17、ncluding fire extinguishing system switches.2. Show single-line fire alarm riser diagram, device and zone schedules. Each device on the riser SECTION 28 31 64.00 10 Page 4Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-should be identified by type an
18、d location, with device number. Indicate connection of equipment by circuit runs, or conduit runs.3. In larger facilities, or systems with multiple types of devices and interfacing to other systems, it is recommended that a fire alarm operating matrix be placed on the drawings. Show actions of input
19、 devices (detectors, manual initiators, water flow contacts, etc.) on one axis and output devices (bells, door releases, smoke control fans, elevator relays, etc.) on the other. Entries which require descriptions, explanation of processes, sequences, interfaces, etc. can be flagged by symbols keyed
20、to supplementary notes. Alternately provide a zone-by-zone sequence of operation or a schedule identifying all initiators, outputs, and interfaces.4. IDC should be provided for interfacing to existing IDC loops. IDC will be provided for special requirements. Normally all devices are addressable or w
21、ill have an addressable interface device installed integrally with the device.*1.1 REFERENCES*NOTE: This paragraph is used to list the publications cited in the text of the guide specification. The publications are referred to in the text by basic designation only and listed in this paragraph by org
22、anization, designation, date, and title.Use the Reference Wizards Check Reference feature when you add a RID outside of the Sections Reference Article to automatically place the reference in the Reference Article. Also use the Reference Wizards Check Reference feature to update the issue dates.Refer
23、ences not used in the text will automatically be deleted from this section of the project specification when you choose to reconcile references in the publish print process.*The publications listed below form a part of this specification to the extent referenced. The publications are referred to wit
24、hin the text by the basic designation only.ACOUSTICAL SOCIETY OF AMERICA (ASA)ASA S3.41 (1990; R 2008) Audible Emergency Evacuation Signal (ASA 96)SECTION 28 31 64.00 10 Page 5Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-FM GLOBAL (FM)FM P7825a (2
25、005) Approval Guide Fire ProtectionINSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE)IEEE C62.41.1 (2002) IEEE Guide on the Surges Environment in Low-Voltage (1000 V and Less) AC Power CircuitsIEEE C62.41.2 (2002) IEEE Recommended Practice on Characterization of Surges in Low-Voltage (1000 V a
26、nd Less) AC Power CircuitsNATIONAL FIRE PROTECTION ASSOCIATION (NFPA)NFPA 1221 (2006; Errata 2006) Installation, Maintenance and Use of Emergency Services Communications SystemsNFPA 70 (2008; AMD 1 2008) National Electrical Code - 2008 EditionNFPA 72 (2006; Errata 2008; Errata 2009) National Fire Al
27、arm CodeNFPA 90A (2008; Errata 2009) Standard for the Installation of Air Conditioning and Ventilating SystemsU.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)47 CFR 15 Radio Frequency DevicesUNDERWRITERS LABORATORIES (UL)UL 1242 (2006; Rev thru Jul 2007) Standard for Electrical Intermediate
28、Metal Conduit - SteelUL 1971 (2002; Rev thru Oct 2008) Signaling Devices for the Hearing ImpairedUL 228 (2006; Rev thru Nov 2008) Door Closers-Holders, With or Without Integral Smoke DetectorsUL 268 (2006) Standard for Smoke Detectors for Fire Alarm Signaling SystemsUL 268A (2008) Smoke Detectors fo
29、r Duct ApplicationUL 38 (2008; Rev thru Dec 2008) Standard for Signaling Boxes for Fire Alarm SystemsUL 464 (2003; Rev thru Feb 2008) Standard for Audible Signal AppliancesUL 521 (1999; Rev thru Jul 2005) Heat Detectors SECTION 28 31 64.00 10 Page 6Provided by IHSNot for ResaleNo reproduction or net
30、working permitted without license from IHS-,-,-for Fire Protective Signaling SystemsUL 6 (2007) Standard for Electrical Rigid Metal Conduit-SteelUL 632 (2000) Electrically-Actuated TransmittersUL 797 (2007) Standard for Electrical Metallic Tubing - SteelUL 864 (2003; Rev thru May 2007) Control Units
31、 and Accessories for Fire Alarm Systems1.2 SYSTEM DESCRIPTIONThe fire detection and alarm system and the central reporting system shall be a complete, supervised fire alarm reporting system configured in accordance with NFPA 72; exceptions are acceptable as directed by the Contracting Officer. Furni
32、sh equipment compatible and UL listed, FM approved, or approved or listed by a nationally recognized testing laboratory in accordance with the applicable NFPA standards. Locks shall be keyed alike. Provide four keys for the system. Furnish tags with stamped identification number for keys and locks.1
33、.2.1 Operation*NOTE: If a small fire alarm system is required, the specification writer should consider utilizing Section 28 31 00.00 10 FIRE DETECTION AND ALARM SYSTEM, DIRECT CURRENT LOOP.If an addition to an existing system is required, provide the make, model number, and other pertinent informat
34、ion on existing components that are to operate with the new equipment. Since new interfaces will have to be compatible with the existing system or to the central fire alarm reporting system, it may be necessary to edit major items out of this specification. If a new fire alarm panel is required, it
35、has to be compatible with the existing central fire alarm reporting system.*Activate the system into the alarm mode by actuation of any alarm initiating device. The system will remain in the alarm mode until the initiating device is reset and the fire alarm control panel is reset and restored to nor
36、mal. Alarm and supervisory initiating devices shall be individually addressable. Alarm initiating devices shall be connected to initiating device circuits (IDC), Style D, to signal line circuits (SLC), Style 6 7, in accordance with NFPA 72. Connect alarm notification appliances to notification appli
37、ance circuits (NAC), Style Z in accordance with NFPA 72. Provide a looped conduit system so that if the conduit and all conductors within are severed at any point, all IDC, NAC and SLC will remain functional. The conduit loop requirement is not applicable to the signal transmission link from the loc
38、al panels (at the protected premises) to the Supervising Station (fire station, fire alarm central communication center). Textual, audible, and visual appliances and systems shall comply SECTION 28 31 64.00 10 Page 7Provided by IHSNot for ResaleNo reproduction or networking permitted without license
39、 from IHS-,-,-with NFPA 72. Fire alarm system components requiring power, except for the control panel power supply, shall operate on 24 Volts dc. Addressable system shall be microcomputer (microprocessor or microcontroller) based with a minimum word size of eight bits and shall provide the followin
40、g features:a. Sufficient memory to perform as specified and as shown for addressable system.b. Individual identity of each addressable device for the following conditions: alarm; trouble; open; short; and appliances missing/failed remote detector - sensitivity adjustment from the panel for smoke det
41、ectors.c. Capability of each addressable device being individually disabled or enabled from the panel.d. Size each SLC to provide 40 percent addressable expansion without hardware modifications to the panel.1.2.2 Operational Features*NOTE: For zoned fire alarm and detection systems, the systems shou
42、ld be zoned by type of device and by floor.The designer will list zones and indicate the exact wording of the descriptive zone labeling.Remove item j. below when elevators are not involved.*The system shall have the following operating features:a. Monitor electrical supervision of IDC, SLC, and NAC.
43、b. Monitor electrical supervision of the primary power (ac) supply, battery voltage, placement of alarm zone module (card, PC board) within the control panel, and transmitter tripping circuit integrity.c. A trouble buzzer and trouble LED/LCD (light emitting diode/liquid crystal diode) to activate up
44、on a single break, open, or ground fault condition which prevents the required normal operation of the system. The trouble signal shall also operate upon loss of primary power (ac) supply, low battery voltage, removal of alarm zone module (card, PC board), and disconnection of the circuit used for t
45、ransmitting alarm signals off-premises. A trouble alarm silence switch shall be provided which will silence the trouble buzzer, but will not extinguish the trouble indicator LED/LCD. Subsequent trouble and supervisory alarms shall sound the trouble signal until silenced. After the system returns to normal operating conditions, the trouble buzzer shall again sound until t
