1、IHS PRODUCT DESIGN IHS ASME Errata Valued Customer, The Errata to ASME Standards are created by ASME to provide corrections to incorrectly published items, or to correct typographical or grammatical errors in ASME Standards. This Erratum applies to the ASME Standard you have purchased. Thank you! C
2、ontact Us: Americas +1 877 413 5184 Toll Free +1 303 397 7956 Direct Europe, Middle East, Africa +44 1344 328040 Phone +44 1344 328005 Fax Asia Pacific +852 2368 5733 Phone +852 2368 5269 Fax This Page is not part of the original publication ASME/B18.2.1 Errata Errata to ASME Standards provide co
3、rrections to incorrectly published items, or to correct typographical or grammatical errors. Such errata shall be used on the date posted. Information contained in the above is the property of the Copyright holder and all Notice of Disclaimer LB, min. p LG, max. Y (see para. 4.7)(4) Use Y dimensions
4、 in Table 8 for the calculation of LG, max./LB, min. (see para. 4.7) instead of following Table 12.Table 14 Dimensions of Square Lag ScrewsH S G Configuration (see para. 2.1.1) Identification (see para. 2.11.1) Screw With Reduced Diameter Body Cone PointF R E H R L E See para. 2.1.4 A See para. 5.3 ASee para. 5.7 Gimlet Point25 approx.60 approx. 60 approx.See para. 2.6 MAp. 2 of 2 07-11-13 17:26:29 Textfile: 001109E002 Unit: UE01
