1、微软认证 70-210模拟试卷 1及答案与解析 1 You are the administrator of a Windows 2000 network. Your network includes 75 Windows NT Workstation 4.0 computers. You are adding 50 new PXE-compliant computers to the network. The hardware on each computer is configured identically. You are using a RIS image to deploy Win
2、dows 2000 Professional to the 50 computers. You successfully install Windows 2000 Professional on the first 10 computers. However, you cannot install Windows 2000 Professional on remaining 40 computers. What should you do? （ A） Configure the DHCP scope to add additional IP addresses. （ B） Run Rbfg.e
3、xe from the RemoteInstallAdmin folder on the RIS server. （ C） Modify the startup sequence in the CMOS of the remaining computers. （ D） Create computer accounts on the remaining computers in the Active Directory. 2 You configure your Windows 2000 Professional computer for Internet Connection Sharing
4、and for TCP/IP filtering as shown in the exhibit.You test your TCP/IP filtering configuration from another client computer. You can access web sites, but you cannot access FTP sites.What should you do to be able to access FTP sites? （ A） Add Port 21 to the TCP Ports section. （ B） Add Port 138 to the
5、 TCP Ports section. （ C） Add Port 21 to the IP Ports section. （ D） Add Port 138 to the IP Ports section. 3 As a Ezonexam employee you are the desktop administrator of a Windows 2000 Professional computer. The Windows 2000 Professional computer has 25 MB of free disk space drive C and 800 MB of free
6、disks pace on drive E. You are unable to print large documents because if inadequate disk space on drive C. You want to be able to use the space on drive E to print large documents. What should you do? （ A） From the Printer Properties dialog box, change the location field to E:WinntSystem32SpoolPrin
7、ters. （ B） From the Print Server Properties dialog box, change the location of the spool folder to any existing file path on drive E. （ C） Copy the C:WinntSystem32SpoolPrinters folder to the E:WinntSystem32SpoolPrinters folder. （ D） Mount drive C as a subdirectory on drive E. 4 You are the network a
8、dministrator for E. Your network has 210 Windows 2000 Professional computers and eleven Windows 2000 Server computers. Users on the network save their work files in home folders on a network server. The NTFS partition that contains the home folders has Encrypting File System (EFS) enabled. A user na
9、med Sandra leaves E. You decrypt the files for her manager. When the manager attempts to open any of the files, he receives the following error message: “Access is denied.“ You want the manager to be able to access the files. What should do? (Each correct answer presents a complete solution. Choose
10、two.) （ A） Move the files from Sandras folder to the managers folder. （ B） Grant the manager NTFSFull Controlpermission to the files. （ C） Run theciphercommand to create a new file encryption key for the manager. （ D） Run theciphercommand to generate an EFS recovery agent key and certificate. （ E） G
11、rant the manager NTFSList Folder Contentspermissions to the folder containing Sandras files. 5 You are preparing to install Windows 2000 Professional on 75 new computers. You want to create a standard installation image to use on all the new computers. The computers have several different configurat
12、ions of hard disks and hardware components. You install Windows 2000 Professional and other standard software on one of the computers. You log on to the computer using the local Administrator account. You configure the standard applications and customize the desktop settings you intend to deploy. Yo
13、u run the Setup Manager and create a Sysprep.inf file. You copy Sysprep.exe and Setupcl.exe to the C:Sysprep folder. You run Sysprep.exe and run your third party disk imaging software. You copy the image to the several test computers and restart the computers. When the installation is complete, you
14、find that some of the computers do not function at all. You also find that the desktop settings do not appear as you have configured them on the original computer. You want to correct the imaging process and ensure that all computers have the same standard desktop. What should you do? (Choose two) （
15、 A） Copy Sysprep.inf to C:Sysprep folder. （ B） Copy the Administrator profile to the Default User profile, and then grant permissions to the Everyone group to use the profile. （ C） Include the-pnpparameter for Sysprep.exe when you rerun that utility. （ D） Include the-nosidgenparameter for Sysprep.ex
16、e when you rerun that utility. 微软认证 70-210模拟试卷 1答案与解析 1 【正确答案】 A 【试题解析】 Explanation: RIS requires Active Directory, DNS and DHCP. The clients can either be PXE-compliant or they can use a Remote boot diskette. In this scenario, the DHCP server has run out of IP-addresses. By extending the scope by 4
17、0 IP addresses the installation on the remaining computers will be successful. Incorrect Answers: B: Rbfg.exe is used to create Remote Boot disks for computers that do not have PXE-compliant network cards. In this scenario, all clients are PXE-compliant and will thus be able to boot through the netw
18、ork and access the RIS image. It is thus not necessary to create Remote Boot disks. C: The 50 new computers have identical hardware. There installation worked on 10 of the new computers. There can thus be no incorrect startup sequence setting in CMOS. D: In this situation there is no need for presta
19、ged computer accounts in Active Directory. Pre-staged computer accounts are used to select between RIS servers. By configuring the RIS server to answer only known client computers it would require user accounts for all RIS clients. This is not the default setting. 2 【正确答案】 A 【试题解析】 Explanation: The
20、FTP protocol uses the TCP port 21. In the exhibit the UDP port 21 has been incorrectly added instead of the TCP port. Incorrect answers: B: The FTP protocol uses Port 21 not Port 138. C: The port 21 should be added as a TCP port 21, not as a UDP port or as an IP protocol. IP is also a network protoc
21、ol and not a port. D: The FTP protocol uses TCP port 21 not port 138. IP is also a network protocol and not a port. 3 【正确答案】 B 【试题解析】 Explanation: When one is unable to print large documents then the hard disk space is insufficient for spooling. To remedy the situation you should create more free sp
22、ace on the hard disk. Since the question mentions that Drive C has 25 MB of free disk space and Disk E has 800 MB of free disk space, and there is an inability to print large documents due to inadequate disk space on Drive C, then it would be logical to change the location of the spool folder to any
23、 existing file path on Drive E if one wants to be able to print large documents. Incorrect answers: A: The Printer Properties dialog box is not the appropriate location from which to change the location of the spool folder. C: This procedure is not how one changes the location of the spool folder. D
24、: There is no need to mount Drive C as a subdirectory on Drive E. Drive C will still have inadequate free disk space. 4 【正确答案】 A,B 【试题解析】 Explanation: A: When a new file is created it inherits the permissions from its parent. A Move operation creates a new version of the resource you are moving if y
25、ou are moving the resource to a different partition-for this reason, permissions of the parent are inherited. A Move operation does not create a new version of the resource if you are moving the resource to a different location on the same partition-for this reason, existing permissions are moved al
26、ong with the resource. B: The NTFS Full Control permission allows a user to change permissions, take ownership, delete subfolders and files, and perform the actions granted by all other permissions. Incorrect answers: C, D: The Cipher utility allows you to encrypt files and folders as well as check
27、the encryption statistics. However, this does not guarantee the manager access to the files because the files have been decrypted already and access was still denied. E: The NTFS List Folder Contents permission allows a user to see the names of files and subfolders in the folder. This is not the sam
28、e as granting access. 5 【正确答案】 B,C 【试题解析】 Explanation: B: A user profile is automatically created and maintains the desktop configuration for each users desktop on the local Windows 2000 computer. This user profile is created when the user logs on to a computer for the first time. An administrator p
29、rofile, which maintains the administrators desktop configuration is created during the Windows 2000 Professional installation. In this scenario the administrator profile must be copied and used as the Default User profile, which is applied to all users. As all users are automatically placed in the E
30、veryone user group, the Everyone user group must be granted permission to access this profile. C: Because the computers that Windows 2000 Professional will be installed onto have different hardware configurations a full plug and play detection must be done during the installation process. This can b
31、e accomplished by including the -pnp parameter to the sysprep.exe utility, as this parameter causes the plug and play detection utility to be used. Incorrect answers: A: When the installation is complete, you find that some of the computers do not function at all and that the desktop settings do not
32、 appear as they have been configured on the original computer. This indicates that the sysprep installation was successful. Therefore the sysprep.inf file must have already been in the C:Sysprep folder (as is the default when using setupmgr.exe to create the file). D: The -nosidgen is only used on t
33、he initial computer where the clone image was made. It instructs the installation program not to generate the system information that is unique to each installation of Windows 2000 Professional. This parameter is not used here during the installation of Windows 2000 Professional on the target computers. It is therefore not relevant to this scenario.
