1、微软认证 70-210模拟试卷 7及答案与解析 1 You want to upgrade 150 computers from Windows NT Workstation 4.0 to Windows 2000 Professional. You create an Unattend.txt file by using Setup Manager. You copy the file to a floppy disk. You then start the installation on a test computer by using the Windows 2000 Professio
2、nal CD-ROM. You insert the floppy disk after the computer starts. Although you had set the user interaction level to full unattended mode, you are prompted for all the required parameters. You want to ensure that the unattended installation does not prompt you for input. What should you do? （ A） Add
3、 a Data section to Unattend.txt, and set the Unattendedinstall parameter to Yes. （ B） Add an Unattend section to Unattend.txt, and set the OEMPreinstall parameter to yes. （ C） Rename Unattend.txt on the floppy disk to Winnt.sif. （ D） Create a $Oem$1 folder on the hard disk of the test computer, and
4、copy Unattend.txt to the folder. 2 You are the network administrator for E. Your computer has a CD-ROM drive attached to a SCSI adapter. You plan to upgrade your computer from Windows NT Workstation 4.0 to Windows 2000 Professional. You determine that the SCSI adapter is not included on the current
5、Hardware Compatibility List (HCL) and that the original SCSI drivers that you used for Windows NT are not compatible with Windows 2000 Professional. You want to upgrade your computer to Windows 2000 Professional. What should you do? （ A） Replace the SCSI adapter card with a Windows 2000 Professional
6、 compatible SCSI adapter. Start the installation from the Windows 2000 Professional CD-ROM. Add the new adapter card drivers when you are prompted. （ B） Obtain Windows 2000 drivers from the SCSI adapter manufacturer. Copy the drivers to C:Winnt folder. Start the installation from the Windows 2000 Pr
7、ofessional CD-ROM. （ C） Obtain Windows 2000 drivers from the SCSI adapter manufacturer. Start the installation by using the Windows 2000 Professional CD-ROM. Add the new adapter card drivers when you are prompted. （ D） Modify Config.sys to use your existing SCSI adapter and existing CD-ROM drive. Us
8、ing Windows NT 4.0, start the installation by running Winnt32.exe from the I386 folder on the Windows 2000 Professional CD-ROM. 3 You are upgrading computer1 and computer2 from Windows NT Workstation 4.0 to Windows 2000 Professional. You successfully upgrade computer1. During the upgrade of computer
9、2, a series of power outages interrupts the upgrade. You discover that the upgrade of computer2 is incomplete. Furthermore, you find that computer2 can no longer run Windows NT workstation 4.0. Computer2 does not support booting from the Windows 2000 Professional CD-ROM. You decide to use computer1
10、to help recover the failed upgrade. What should you do? （ A） On computer1, copy the CD-ROM driver and system files named ntdetect, ntbootdd.sys, Ntdll.dll and Setupldr.bin to a formatted floppy disk. On computer2, restart the computer by using the floppy disk. Then run WinNT32/debug from the Windows
11、 2000 Professional CD-ROM. （ B） From computer1, copy the CD-ROM driver and system files named Ntdetect, Ntbootdd.sys, Ntdll.dll, and Setupldr.bin to a formatted floppy disk. On the computer2, restart the upgrade by using the floppy disk. Then run WinNT32/rx from the Windows 2000 Professional CD-ROM.
12、 （ C） On the computer1, run Makebt32.exe from the Bootdisk folder on the Windows 2000 Professional CD-ROM. On computer2, restart the upgrade by using the newly created floppy disks. （ D） On computer1, perform a remote installation from a network share. On computer2, when the text portion of setup ha
13、s completed, resume the installation by using the Setup Manager. 4 You are the administrator of your companys network. A user named Paul in the service department has a Windows 2000 Professional computer. Paul needs to access the files that are in a shared folder on his computer. A local group named
14、 Sales has permissions to access the data. Paul is a member of the Sales local group but he cannot access the file he needs. What should you do? （ A） Grant Paul NTFS permission so that he can access any parent folder to files in the shared folder. （ B） Share the Sales folder and grant Paul shared fo
15、lder permission to access the shared Sales folder. （ C） Remove Paul from any other group that has been explicitly denied access to the Sales folder. （ D） Delete the Sales local group and recreate it. Add individual user accounts from the Sales department back into Sales local group. 5 You are the ad
16、ministrator of a Windows 2000 Professional computer named Computer1. Computer1 has a shared color laser printer named Printer1. Printer1 will not turn on. The printer queue for Printer1 has three jobs waiting to print. You want to enable the three waiting print jobs to print to an identical print de
17、vice, which has been shared as Printer2 on Computer2. You also want to connect users who currently connect to Printer1 to automatically use Printer2 without having to reconfigure their default printer. What should you do? （ A） Enable bidirectional support for Printer1. （ B） Change the share name of
18、Printer2 to Printer1. （ C） Configure Printer1 to add a port, and set the port to Computer2Printer2. （ D） Configure the printer server properties to use the path Computer2$Winnt$System32SpoolPrinters. 6 You are the administrator of Es network. You want to connect your Windows 2000 Professional comput
19、er to a new TCP/IP based laser print device. The print device is Plug and Play compliant and is included on the current Hardware Compatibility List (HCL). When you attempt to create a new TCP/IP printer port you receive the following error message: “Specified Port cannot be added. The port already e
20、xists.“ You want to be able to use the new TCP/IP printer. What should you do? （ A） Modify the properties of the existing printer port to use the new print device. （ B） Change the LPT port setting to bidirectional in the BIOS on your computer. （ C） Change the LPT port setting to enable legacy Plug a
21、nd Play detection on your computer. （ D） Obtain and install the WDM-compliant device drivers and printing software for the printer. 7 You are the administrator of Ezonexams network. Users in the sales and marketing departments have Windows 2000 Professional installed on their computers. The sales de
22、partment computers have standard VGA adapters and the marketing department computers have SGVA adapters. A Ezonexam policy requires both the sales and marketing departments have a standard desktop configuration. The desktop configuration includes a custom bitmap logo that is saved with 16-bit color
23、and 1028 x 768 resolution. Several users in the marketing department have viewed the bitmap and report that it is distorted and does not reflect the proper color depth. You want users in the sales and marketing departments to have a standard desktop configuration that can only be modified by the adm
24、inistrator. You also want the custom bitmap to be viewed correctly on all computers. What should you do? (Each correct answer presents part of the solution. Choose three) A.Install the appropriate WDM-compliant drivers for the computers in the marketing department. B.Change the custom bitmap to a 16
25、-color bitmap that has 640 x 480 resolution. C.Configure a separate user profile for each user in the marketing department. D.Configure each user account in the sales and marketing departments to use a roaming user profile. E.Rename Ntuser.dat to Ntuser.man. F.Move the Ntuser.dat file to C:Profiles
26、on a network server. G.Configure the NTFS permissions on Ntuser.dat to grant only administrators Full Control. 8 You are the network administrator for Ezonexam. You plan to upgrade 550 computers from Windows 95 to Windows 2000 Professional. You create an Unattend.txt file by using Setup Manager. You
27、 copy the file to the network share that will be used to install Windows 2000 Professional. You start the installation on a test computer by using a network shared folder and an answer file. When the installation is complete, you realize that the upgraded computers are not utilizing their entire har
28、d disks. You want to ensure that the unattended installation utilizes the entire hard drive on all computers. What should you do? (Each correct answer presents part of the solution. Choose two) A.Add an Unattended section to Unattend.txt, and set the File System parameter to Convert NTFS. B.Rename U
29、nattend.txt to Cmdlines.txt and copy it to the $OEM$ subdirectory. C.Add a GUIRunOnce section to answer file, and add an entry for the Unattend.txt file. D.Create a $OEM$S$ folder on the hard disk of the test computer, and copy Unattend.txt to the folder. E.Add an Unattended section to Unattend.txt,
30、 and set the Extend OEM Partition to 1. F.Add an Unattended section to Unattend.txt, and set the Extend OEM Partition parameter to 999. 9 You are the network administrator for Es Windows 2000 network. You have a print device attached to the LPT1 port of your Windows 2000 Professional computer. The p
31、rinter is named EzonexamPrinter3. You plan to share the print device for use by the Sales group. You will allow the user account SalesUser1 from the Sales group to be the print administrator for the Sales groups print jobs. You want to enable SalesUser1 to delete print jobs generated by the Sales gr
32、oup on the print device. You want to prevent SalesUser1 from changing printer settings. You want to prevent SalesUser1 from being able to delete your print jobs. You do not want the shared printer to appear when browsing in Windows Explorer. What should you do on your computer? Each correct answer p
33、resents part of the solution. Select two. A.Create a shared printer named SalesPrinter using the LPT1 port and remove all permissions for the Everyone group. B.Create a Local Port named LaserJet1 and create a shared printer named SalesPrinter using the new port. C.Create a shared printer named Sales
34、Printer$ using the LPT1 port. D.Grant SalesUser1 Manage Printers permission on the new shared printer. E.Grant SalesUser1 Manage Documents permission on the new shared printer. F.Add SalesUser1 to the Power Users group. 一、填空题 10 You want to install Windows 2000 Professional on 20 new PXE compliant c
35、omputers, which do not have operating systems installed. You create a RIS image and load the image onto the RIS server and then start the new computers. You find that the new computers cannot connect to the RIS server. You verify that existing client computers on the network can connect to network s
36、ervers.What should you do? (SELECT AND PLACE)微软认证 70-210模拟试卷 7答案与解析 1 【正确答案】 C 【试题解析】 Explanation: When booting the computer from the CD-ROM, and then using an answer file from a floppy disk, the answer file must be named Winnt.sif. Incorrect answers: A: A data section must be added to the unattend.
37、txt file, and the unattendedinstall Parameter must be set to YES. However, the answer file must be named winnt.sif, as it is located on the diskette. B: An Unattend section in the answer file has already been created by the Setup Manager. D: The unattend.txt file must be located on a diskette, and i
38、t must be named winnt.sif. It should not be copied to a folder named $OEM$ on the hard drive. 2 【正确答案】 A 【试题解析】 Explanation: The hardware compatibility list (HCL) is a list of computers and peripherals that have been tested and have passed compatibility testing with the product for which the HCL is
39、being developed. For example, the Windows 2000 HCL lists the products that have been tested and found to be compatible with Windows 2000. Before upgrading to Windows 2000, you should ensure that the computer hardware meets the minimum Windows 2000 hardware requirements. You must also check the Hardw
40、are Compatibility List or test the computers for hardware compatibility using the Windows 2000 Compatibility tool. Since the question mentions that the SCSI adapter is not included on the current HCL and that the original SCSI drivers, used for Windows NT is not compatible with Windows 2000, you sho
41、uld get a Windows 2000 Professional compatible SCSI adapter, start the installation of the Windows 2000 Professional CD-ROM and then add the new adapter card when prompted to do so. Incorrect Answers: B: When purchasing a new SCSI adapter card, you will obviously get the drivers for it as well. Sinc
42、e the problem stems from an originally incompatible SCSI driver, you need to get a new, compatible SCSI adapter card that will allow the upgrade to Windows 2000 Professional. C: Windows 2000 drivers will not be obtainable from the SCSI adapter manufacturer, and besides, you will already have the Win
43、dows 2000 Professional CD-ROM. D: There is no need to modify the Config.sys to use the existing SCSI adapter since the adapter is not Windows 2000 compatible. 3 【正确答案】 C 【试题解析】 Explanation: You can create the four setup boot disks by using either makeboot.exe or makebt32.exe. Both are located in the
44、 Bootdisk directory on the Windows 2000 installation CD. These disks can be used to restart the installation process on computer2. Incorrect answers: A: Winnt32 is a 32-bit application and can only be used from inside a Windows environment and not after starting the computer by means of a boot diske
45、tte. A computer can only be booted into DOS mode from a boot disk, and DOS mode cannot use 32-bit applications. B: Winnt32 is a 32-bit application and can only be used from inside a Windows environment and not after starting the computer by means of a boot diskette. A computer can only be booted int
46、o DOS mode from a boot disk, and DOS mode cannot use 32-bit applications. D: The text portion of the setup on computer2 will not be completed. To use a network installation on computer2, computer2 must be booted with a network boot disk. 4 【正确答案】 C 【试题解析】 Explanation: The Sales group, which Paul is
47、a member of, has permission to access the files. However, Paul still cannot access the files. It would seem that Paul has a permissions conflict. A user can be granted file permissions in a number of contexts: as a user or as a member of a user group. When a user has different file permissions in mu
48、ltiple contexts, the most restrictive permission is applied. Furthermore, the deny permission overrides all other permissions. As Paul does not have access to the file you must therefore assume Paul has explicitly been denied access to the file in some context, as member of one or more groups that h
49、ave been denied access to the file. You would thus have to remove Paul from such a group so that the restriction is not applied to Paul. Incorrect answers: A: Paul has already got NTFS permission to the file, since he belongs to the Sales group. The deny permission overrides all other file permissions. You therefore need to remove Pauls user account from the groups that have been denied access to the file. B: When a user has different file permissions in multiple contexts, the most restrictive permission is applied. Furth
