1、Designation: D5616 04 (Reapproved 2016)Standard Specification forReclaimed Trichloroethylene1This standard is issued under the fixed designation D5616; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A nu
2、mber in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This specification covers the grades of trichloroethyl-ene2typically needed in various industries for noncriticalapplications such as in
3、metal cleaning formulations. It may beused as a reference document by purchasers or personsestablishing in-house trichloroethylene recovery programs.2. Referenced Documents2.1 ASTM Standards:3D1064 Test Methods for Iron in Rosin Tall Oil Fatty Acidsand Other Related Products (Withdrawn 2002)4D2108 T
4、est Method for Color of Halogenated OrganicSolvents and Their Admixtures (Platinum-Cobalt Scale)D2109 Test Methods for Nonvolatile Matter in HalogenatedOrganic Solvents and Their AdmixturesD2111 Test Methods for Specific Gravity and Density ofHalogenated Organic Solvents and Their AdmixturesD2942 Te
5、st Method for Total Acid Acceptance of Haloge-nated Organic Solvents (Nonreflux Methods)D2989 Test Method for Acidity-Alkalinity of HalogenatedOrganic Solvents and Their AdmixturesD3401 Test Methods for Water in Halogenated OrganicSolvents and Their AdmixturesD3741 Test Methods for Appearance of Adm
6、ixtures Con-taining Halogenated Organic SolventsD6806 Practice for Analysis of Halogenated Organic Sol-vents and Their Admixtures by Gas Chromatography2.2 Code of Federal Regulations:529 CFR 1910.1200 Department of Labor, OSHARegulations, Hazard Communication49 CFR Parts 100 to 199 Department of Tra
7、nsportationHazardous Materials Regulations3. Classification3.1 Type IGenerally recognized for use in precision ap-plications.3.2 Type IIUse for less-demanding precision applications.3.3 Type IIIMay not be suitable for all applications.4. Properties4.1 Type I reclaimed trichloroethylene shall meet th
8、e re-quirements of Table 1.4.2 Type II reclaimed trichloroethylene shall meet the re-quirements of Table 1.4.3 Type III reclaimed trichloroethylene shall meet therequirements of Table 1.5. Packaging5.1 Industrial or commercial quantities shall be packagedand labeled in accordance with DOT regulation
9、s as found in49 CFR Parts 100 to 199, in accordance with state and localregulations, and in accordance with OSHAregulations found in29 CFR 1919.1200.6. Keywords6.1 halogenated solvent; reclaimed; TCE; tri;trichloroethyleneTypes I, II, and III1This specification is under the jurisdiction of ASTM Comm
10、ittee D26 onHalogenated Organic Solvents and Fire Extinguishing Agents and is the directresponsibility of Subcommittee D26.02 on Vapor Degreasing.Current edition approved Feb. 1, 2016. Published February 2016. Originallyapproved in 1994. Last previous edition approved in 2010 as D5616-04(2010). DOI:
11、10.1520/D5616-04R16.2Trichloroethylene: CAS No. 79-01-6.3For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.4The
12、last approved version of this historical standard is referenced onwww.astm.org.5Available from U.S. Government Publishing Office, 732 N. Capitol St., NW,Washington, DC 20401-0001, http:/www.gpo.gov.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. Un
13、ited States1ASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the riskof infringement of such
14、 rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additi
15、onal standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known to the
16、ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the a
17、boveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org). Permission rights to photocopy the standard may also be secured from the Copyright Clearance Center, 222Rosewood Drive, Danvers, MA 01923, Tel: (978) 646-2600; http:/ 1
18、 PropertiesProperty Specification Test MethodType I Type II Type IIISpecific gravity, 25/25 1.45 to 1.46 1.44 to 1.47 1.43 to 1.48 D2111Nonvolatile residue, ppm, max 50 50 50 D2109Water, ppm, max 100 100 150 D3401 orD1064Assay, wt % 99.5 99.0 97.0 D68061,1,1 trichloroethane content, wt %, max 0.02 0.05 0.5 D6806Color, Pt-Co, max 20 20 35 D2108Appearance clear and free fromsuspended matterclear and free fromsuspended matterclear and free fromsuspended matterD3741Acid acceptance, as NaOH, wt %, min 0.16 0.16 0.20 D2942Acidity, as HCl, ppm, max 1.0 1.0 1.0 D2989D5616 04 (2016)2
