1、Designation: E2771 11Standard Terminology forHomeland Security Applications1This standard is issued under the fixed designation E2771; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parenthes
2、es indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This terminology provides definitions and abbreviationsof terms used in ASTM International standards pertaining tohomeland security applications.2. Refere
3、nced Documents2.1 ASTM Standards:2E2411 Specification for Chemical Warfare Vapor Detector(CWVD)3. Significance and Use3.1 In this terminology, definitions used in other ASTMInternational standards are indicated by following the defini-tion with the designation of the subcommittee responsible forthat
4、 standard.4. Terminology4.1 Definitions:add-on, nin sensors and detectors for homeland securityapplications, any additional parts that provide tailoring of apersonal detectors functionality for specific applications.E24114.2 Abbreviations:GAnerve agentcommon name: tabun, IUPAC name:O-Ethyl N,N-dimet
5、hyl phosphoramidocyanidateGBnerve agentcommon name: sarin, IUPAC name:Propan-2-yl methylphosphonofluoridateGDnerve agentcommon name: soman, IUPAC name:3,3-Dimethylbutan-2-yl methylphosphonofluoridateGFnerve agentcommon name: cyclosarin, IUPAC name:Cyclohexyl methylphoshonofluoridateHDblister agentco
6、mmon name: distilled mustard, IUPACname: Bis(2-chloroethyl) sulfideLblister agentcommon name: lewisite, IUPAC name:2-Chloroethenylarsonous dichloride5. Keywords5.1 decontamination; detection; homeland security;preparednessASTM International takes no position respecting the validity of any patent rig
7、hts asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any
8、 time by the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments wi
9、ll receive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by AS
10、TM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); o
11、r through the ASTM website(www.astm.org). Permission rights to photocopy the standard may also be secured from the ASTM website (www.astm.org/COPYRIGHT/).1This terminology is under the jurisdiction of ASTM Committee E54 onHomeland Security Applications and is the direct responsibility of Subcommitte
12、eE54.92 on Terminology.Current edition approved Dec. 15, 2011. Published January 2012. DOI: 10.1520/E2771-11.2For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.1Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
