1、BRITISH STANDARD BS 5173-100: 1992 Methods of test for Rubber and plastics hoses and hose assemblies Part 100: General introductionBS5173-100:1992 This British Standard, having been prepared under the directionof the Plastics and Rubber Standards Policy Committee, was published underthe authority of
2、 the Standards Board and comes intoeffect on 28 February1992 BSI 03-1999 First published April 1986 Second edition February 1992 The following BSI references relate to the work on this standard: Committee reference PRM/66 Announced in BSI News March1992 ISBN 0 580 20443 X Committees responsible for
3、this British Standard The preparation of this British Standard was entrusted by the Plastics and Rubber Standards Policy Committee (PRM/-) to Technical Committee PRM/66, upon which the following bodies were represented: Association of Metropolitan Authorities British Coal Corporation British Compres
4、sed Gases Association British Gas plc British Rubber Manufacturers Association Chief and Assistant Chief Fire Officers Association Energy Industries Council Fire Extinguishing Trades Association Home Office Institution of Fire Engineers Liquefied Petroleum Gas Industry Technical Association (UK) Lon
5、don Fire and Civil Defence Authority London Regional Transport Malaysian Rubber Producers Research Association Ministry of Defence Society of Motor Manufacturers and Traders Limited The following bodies were also represented in the drafting of the standard, through subcommittees and panels: British
6、Fluid Power Association Engineering Equipment and Materials Users Association Amendments issued since publication Amd. No. Date CommentsBS5173-100:1992 BSI 03-1999 i Contents Page Committees responsible Inside front cover Foreword ii 1 Scope 1 2 Format 1 Table 1 Format of BS 5173 2BS5173-100:1992 ii
7、 BSI 03-1999 Foreword This Part of BS5173 has been prepared under the direction of the Plastics and Rubber Standards Policy Committee and supersedes BS5173-100:1986 which is withdrawn. BS5173 was first published in1976 and1977 in a series of six Parts, now entirely superseded by revised Parts, consi
8、sting of Sections, published separately. The present format facilitates the revision of individual test methods and allows the addition of new methods, many of which are adoptions of international standards prepared by Technical Committee45, Rubber and rubber products, of the International Organizat
9、ion for Standardization (ISO). Where appropriate, international standards have been dual-numbered as BritishStandards. It should be noted that BS5173-5:1977 has been withdrawn and not replaced by new Sections. Suitable methods are found in the BS903 series of standards to replace those that were in
10、BS5173-5:1977. Methods of test for materials used in the construction of hoses are covered in BS903 “Physical testing of rubber” and BS2782 “Methods of testing plastics”. Further Sections of BS5173 may be added in due course. Where applicable the test methods in BS5173 may also be applied to tubing.
11、 A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises
12、 a front cover, an inside front cover, pages i and ii, pages1 to 3 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on theinside front cover.BS5173-100:1992 BSI 03-1999 1 1 Scope This Part of
13、 BS5173 lists the Parts and Sections of BS5173, together with their corresponding international standards and a reference to the relevant clauses or Parts of the1976 or1977 editions of BS5173. 2 Format Table 1 gives the format for the revision of BS5173. The degree of correspondence to the internati
14、onal standards listed is indicated by the following: a) N an identical standard (dual-numbered); b) = a technically equivalent standard; c) s a related standard.BS 5173-100:1992 2 BSI 03-1999 Table 1 Format of BS 5173 Current Part and Section Title Part of 1976 or1977edition Relevant clause of1976or
15、1977edition Corresponding international standards BS 5173-100 General introduction None None BS 5173-101 Determination of dimensions BS 5173-101.1:1985 Measurement of dimensions (excluding length) BS 5173-1:1976 excluding clause 9 N ISO 4671:1984 BS 5173-101.2:1987 Measurement of length of hoses and
16、 hose assemblies BS5173-1:1976 Clause 9 None BS 5173-102 Hydraulic pressure tests BS 5173-102.1:1991 Hydrostatic tests BS5173-2:1976 Clause 4 s ISO1402:1984 BS 5173-102.2:1985 Determination of volumetric expansion None N ISO6801:1983 BS 5173-102.3:1988 Determination of volumetric expansion of fuel-d
17、ispensing pump hoses BS5173-2:1976 Clause 5 None BS 5173-102.4:1990 Determination of volumetric expansion of hydraulic hoses BS 5173-2:1976 Clause 6 None BS 5173-102.5:1985 Pressure impulse test for high pressure hydraulic hoses BS 5173-2:1976 (and amendment No. 2) Clause 7.1 to 7.4 and7.6 N ISO 680
18、3:1984 BS 5173-102.6:1991 Pressure impulse test with flexing for high pressure hydraulic hoses (inverted “U” configuration) BS5173-2:1976 (and amendment No. 2) Clause 7.6 N ISO6802:1991 BS 5173-102.7:1988 Pressure impulse test with flexing for high pressure hydraulic hoses (half omega configuration
19、None N ISO8032:1987 BS 5173-102.8:1987 Pressure impulse test for rigid helix reinforced thermoplastics hoses BS5173-2:1976 Clause 8 = Annex A of ISO3994:1977 BS 5173-102.9:1985 Determination of resistance to vacuum BS5173-3:1977 Clause 5 N ISO7233:1983 BS 5173-102.10:1990 Hydrostatic tests for oil s
20、uction and discharge hose BS5173-2:1976 Clause 4.3 None BS 5173-103 Physical tests BS 5173-103.1:1986 Determination of adhesion between components BS5173-3:1977 Clause 4 N ISO 8033:1985BS 5173-100:1992 BSI 03-1999 3 Table 1 Format of BS 5173 Current Part and Section Title Part of 1976 or1977edition
21、Relevant clause of1976or1977edition Corresponding international standard BS 5173-103.2:1990 Determination of crush resistance of hoses BS5173-3:1977 Clause 6 None BS 5173-103.4:1988 Determination of flammability of mining hoses BS 5173-3:1977 Clause 8 N ISO 8030:1987 BS 5173-103.5:1985 Bending tests
22、 BS 5173-3:1977 Clause 7 N ISO 1746:1983 BS 5173-103.6:1990 Determination of ignitability of lining BS 5173-3:1977 Clause 9 None BS 5173-103.7:1991 Determination of fracture resistance of rigid polymer helical reinforcement in thermoplastics hoses BS 5173-3:1977 Clause 10 s Annex C of ISO3994:1977 B
23、S 5173-103.8:1991 Determination of resistance to steam BS 5173-3:1977 Clause 11 N ISO 4023:1991 BS 5173-103.9:1986 Determination of abrasion resistance of the outer cover Amendment No. 1to BS 5173-3:1977 Clause 12 N ISO 6945:1983 BS 5173-103.11:1988 Determination of gas permeance Amendment No. 1to B
24、S 5173-3:1977 Clause 13 N ISO 4080:1987 BS 5173-103.12:1988 Determination of vapour transmission of liquids through walls None N ISO 8308:1987 BS 5173-104 Electrical tests BS 5173-104.1:1991 Measurement of electrical resistance of hoses and hose assemblies BS 5173-4:1977 s ISO 8031:1987 BS 5173-104.
25、2:1991 Measurement of electrical continuity and discontinuity of hoses and hose assemblies BS 5173-4:1977 s ISO 8031:1987 BS 5173-106 Environmental tests BS 5173-106.1:1989 Determination of low temperature flexibility BS 5173-6:1977 Clause 4 N ISO 4672:1988 BS 5173-106.2:1990 General requirements fo
26、r high temperature ageing tests BS 5173-6:1977 Clause 6 None BS 5173-106.3:1991 Determination of ozone resistance BS 5173-6:1977 Clause 5 N ISO 7326:1991 BS 5173-106.4:1989 Determination of resistance to ultraviolet light None N ISO 8580:1987BSI 389 Chiswick High Road London W4 4AL | | | | | | | | |
27、 | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BSI British Standards Institution BSI is the independent nation
28、al body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the
29、 latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of wh
30、ich can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign stan
31、dards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on
32、 standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Infor
33、mation Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax:
34、020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval sys
35、tem or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If t
36、hese details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.
