1、BRITISHSTANDARD BS A306:1994 ISO8280:1993 Rivets, solid, universal head, metallic material, with or without surface treatment Dimensions UDC 621.884:629.7BSA306:1994 This BritishStandard, having been prepared under the directionof the Aerospace Standards Policy Committee, waspublished under the auth
2、orityof the Standards Boardand comes into effect on 15 August 1994 BSI 01-2000 The following BSI references relate to the work on this standard: Committee reference ACE/12 Draft for comment 91/82708 DC ISBN 0 580 23220 4 Committees responsible for this BritishStandard The preparation of this British
3、Standard was entrusted by the Aerospace Standards Policy Committee (ACE/-) to Technical Committee ACE/12, upon which the following bodies were represented: The Association of Electronics, Telecommunications and Business EquipmentIndustries British Industrial Fastners Federation Ministry of Defence S
4、ociety of British Aerospace Companies Ltd. Amendments issued since publication Amd. No. Date CommentsBSA306:1994 BSI 01-2000 i Contents Page Committees responsible Inside front cover National foreword ii 1 Scope 1 2 Normative reference 1 3 Configuration and dimensions 1 Figure 1 1 Table 1 Dimensions
5、 (except length L 1 ) 2 Table 2 Lengths L 1for rivets in aluminium and aluminium alloys 3 Table 3 Lengths L 1for rivets in nickel alloys, corrosion-resistant steels, commercially pure titanium and titanium alloys 4 List of references Inside back coverBSA306:1994 ii BSI 01-2000 National foreword This
6、 BritishStandard has been prepared under the direction of the Aerospace Standards Policy Committee. It is identical with ISO8280:1993 Aerospace Rivets, solid, universal head, metallic material, with or without surface treatment Dimensions published by the International Organization for Standardizati
7、on (ISO). A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-reference International S
8、tandard Corresponding BritishStandard ISO286-2:1988 BS EN20286 ISO system of limits and fits Part2:1992 Tables of standard tolerance grades and limitdeviations for holes and shafts (Identical) Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, pages1 to4, an
9、 inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.BSA306:1994 BSI 01-2000 1 1 Scope This International Standard specifies the dimensions of univers
10、al head solid rivets, in metallic material, with or without surface treatment. It is intended for the drawing up of aerospace product standards. 2 Normative reference The following standard contains provisions which, through reference in this text, constitute provisions of this International Standar
11、d. At the time of publication, the edition indicated was valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent edition of the standard indicated below. Members of IEC and
12、ISO maintain registers of currently valid International Standards. ISO286-2:1988, ISO system of limits and fits Part2: Tables of standard tolerance grades and limit deviations for holes and shafts. 3 Configuration and dimensions SeeFigure 1and Table 1to Table 3. Dimensions and tolerances are express
13、ed in millimetres. They are applicable after any surface treatment. 1) The Length range is limited (seeTable 2and Table 3). 2) Drill start option, only for corrosion-resistant steel, nickel alloys, commercially pure titanium, titanium alloys. Figure 1 BSA306:1994 2 BSI 01-2000 Table 1 Dimensions (ex
14、cept length L 1 ) Diameter code D 1 a D 2 D 3 D 4 H L 2 L 3 R 1 R 2 d11 b max. min. max. min. max. min. max. min. max. min. 0,08 016 1,6 3,36 3,04 1,6 1,2 0,9 0,7 1,4 2 0,15 020 2 4,2 3,8 2,0 1,5 1,1 0,9 2,4 025 2,5 5,25 4,75 2,5 1,8 2,0 1,7 1,3 1,1 0,8 0,5 3 030 3 6,3 5,7 3,0 2,2 2,4 2,1 1,5 1,3 0,
15、9 0,6 3,7 035 3,5 7,35 6,65 3,5 2,6 2,8 2,45 1,8 1,6 1,6 1,05 0,70 4,3 0,25 040 4 8,4 7,6 4 3 3,2 2,8 2,0 1,8 1,2 0,8 4,9 050 5 10,5 9,5 5,0 3,7 4,0 3,5 2,4 2,2 2 1,5 1,0 6,1 060 6 12,6 11,4 6,0 4,5 4,8 4,2 2,8 2,6 1,8 1,2 7,3 080 8 16,8 15,2 8 6 6,4 5,6 3,7 3,5 2,4 1,6 9,8 100 10 21 19 10,0 7,5 8 7
16、 4,5 4,3 3 2 12,2 a Over length L 2 , D 1max. may increase by0,03. b SeeISO286-2.BSA306:1994 BSI 01-2000 3 Table 2 Lengths L 1for rivets in aluminium and aluminium alloys Length Diameter code Code L 1 +0,5 0 016 020 025 030 035 040 050 060 080 100 Shape of tail end a A A A B A B A B A B A B A B A B
17、A B 003 3 + + 004 4 + + + + + + + + 005 5 + + + + + + + + 006 6 + + + + + + + + + + 007 7 + + + + + + + + + + 008 8 + + + + + + + + + + + + 009 9 + + + + + + + + + + + + 010 10 + + + + + + + + + + + + + + 011 11 + + + + + + + + + + + + + + 012 12 + + + + + + + + + + + + + + 013 13 + + + + + + + + +
18、+ + + + + + + 014 14 + + + + + + + + + + + + + + + + 015 15 + + + + + + + + + + + + + + + + 016 16 + + + + + + + + + + + + + + + + 017 17 + + + + + + + + + + + + + + + + 018 18 + + + + + + + + + + + + + + + + 019 19 + + + + + + + + + + + + + + + 020 20 + + + + + + + + + + + + + + + 022 22 + + + + +
19、+ + + + + + + + + 024 24 + + + + + + + + + + + + + + 026 26 + + + + + + + + + + + + 028 28 + + + + + + + + + + + + 030 30 + + + + + + + + + + + 032 32 + + + + + + + + + + + 035 35 + + + + + + + + + + 040 40 + + + + + + + 045 45 + + + + + + 050 50 + + + + + 055 55 + + + + 060 60 + + + + a Form A: non
20、-radiused tail end (seeFigure 1) Form B: radiused tail end (seeFigure 1)BSA306:1994 4 BSI 01-2000 Table 3 Lengths L 1for rivets in nickel alloys, corrosion-resistant steels, commercially pure titanium and titanium alloys Lengths Diameter code Code L 1 +0,5 0 016 020 025 030 035 040 050 060 Shape of
21、tail end a A A A B A B A B A B A B A B 003 3 + + 004 4 + + + + + + + + 005 5 + + + + + + + + 006 6 + + + + + + + + + + 007 7 + + + + + + + + + + 008 8 + + + + + + + + + + + + 009 9 + + + + + + + + + + + + 010 10 + + + + + + + + + + + + + + 011 11 + + + + + + + + + + + + + + 012 12 + + + + + + + + +
22、+ + + + + 013 13 + + + + + + + + + + + + + + 014 14 + + + + + + + + + + + + + + 015 15 + + + + + + + + + + + + + + 016 16 + + + + + + + + + + + + + + 017 17 + + + + + + + + + + + + 018 18 + + + + + + + + + + + + 019 19 + + + + + + + + + + 020 20 + + + + + + + + + + 022 22 + + + + + + + + 024 24 + +
23、+ + + + + + 026 26 + + + + + + 028 28 + + + + + + 030 30 + + + + 032 32 + + + + 035 35 + + 040 40 + + a Form A: non-radiused tail end (seeFigure 1) Form B: radiused tail end (seeFigure 1)BSA306:1994 BSI 01-2000 List of references Seenational foreword.BS A306:1994 ISO8280:1993 BSI 389 Chiswick High R
24、oad London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or
25、 revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would infor
26、m the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.
27、 Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as
28、 BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which giv
29、e details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits conta
30、ct Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no ext
31、ract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as sy
32、mbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.
