1、BRITISH STANDARD AEROSPACE SERIESBS EN 2607:2005O-rings for adaptors, threaded, with lockring SurveyThe European Standard EN 2607:2005 has the status of a British StandardICS 49.030.99g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g
2、3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Fri Apr 14 03:09:37 BST 2006, Uncontrolled Copy, (c) BSIBS EN 2607:2005This British Standard was published under the authority of the Standards Policy and Strategy Committee on 24 January
3、 2006 BSI 24 January 2006ISBN 0 580 47574 3National forewordThis British Standard is the official English language version of EN 2607:2005.The UK participation in its preparation was entrusted to Technical Committee ACE/12, Aerospace fasteners and fastening systems, which has the responsibility to:
4、A list of organizations represented on this committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Stan
5、dards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard
6、 does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European devel
7、opments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued
8、 since publicationAmd. No. Date CommentsLicensed Copy: Wang Bin, na, Fri Apr 14 03:09:37 BST 2006, Uncontrolled Copy, (c) BSIEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 2607December 2005ICS 49.030.99English VersionAerospace series - O-rings for adaptors, threaded, with lockring- SurveySrie aro
9、spatiale - Raccords droits mtriques avec baguede scurit - Configuration - Dimensions des joints toriquesLuft- und Raumfahrt - O-Ringe fr geradeEinschraubverschraubungen mit Sicherungsring - bersichtThis European Standard was approved by CEN on 28 October 2005.CEN members are bound to comply with the
10、 CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or t
11、o any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.C
12、EN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland an
13、d United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2607:2005:
14、 ELicensed Copy: Wang Bin, na, Fri Apr 14 03:09:37 BST 2006, Uncontrolled Copy, (c) BSI2 Contents Page Foreword 3 1 Scope .4 2 Normative references .4 3 Required characteristics 5 4 Designation .6 EN 2607:2005Licensed Copy: Wang Bin, na, Fri Apr 14 03:09:37 BST 2006, Uncontrolled Copy, (c) BSI3 Fore
15、word This European Standard (EN 2607:2005) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has re-ceived the approval of the National Associa
16、tions and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2006, and conflicting national standards sh
17、all be withdrawn at the latest by June 2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Reg
18、ulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Den-mark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxem-bourg, Malta, Netherlands
19、, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 2607:2005Licensed Copy: Wang Bin, na, Fri Apr 14 03:09:37 BST 2006, Uncontrolled Copy, (c) BSI4 1 Scope This standard specifies the O-ring for adaptors with lockring and the dimensions. 2 Normative
20、references The following referenced documents are indispensable for the application of this document. For dated refer-ences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 3601-1, Fluid power systems O-rin
21、gs Part 1: Inside diameters, cross sections, tolerances and size identification code EN 2602, Aerospace series Ports for adaptors, threaded, with lockring Geometric configuration EN 2603, Aerospace series Port ends for adaptors, threaded, with lockring Geometric configuration EN 2604, Aerospace seri
22、es 830 interface for adaptors, threaded, with lockring Geometric configuration EN 2605, Aerospace series 24 interface for adaptors, threaded, with lockring Geometric configuration EN 2606, Aerospace series 60 interface for adaptors, threaded, with lockring Geometric configuration EN 2608, Aerospace
23、series Installation and removal requirements for 830 adaptors, threaded, with lock-ring EN 2645, Aerospace series Lockrings for adaptors, threaded, with lockring Dimensions EN 2607:2005Licensed Copy: Wang Bin, na, Fri Apr 14 03:09:37 BST 2006, Uncontrolled Copy, (c) BSI5 3 Required characteristics 3
24、.1 Assembly See EN 2608. 3.2 Configuration Key 1 O-ring (see Table 1, Figure 2 and EN 2608) aAccording to EN 2603 bAccording to EN 2602 cAccording to EN 2645 dInterface according to EN 2604 or EN 2605 or EN 2606 Figure 1 EN 2607:2005Licensed Copy: Wang Bin, na, Fri Apr 14 03:09:37 BST 2006, Uncontro
25、lled Copy, (c) BSI6 3.3 Dimensions Dimensions in millimetres Figure 2 Table 1 Dimensions in millimetres d1CodeaPort dimension code Size identification codebNominal Tolerance 05 077 3601-A0045A 4,50 0,12 06 098 3601-A0060A 6,00 0,13 08 125 3601-A0080A 8,00 0,14 10 136 3601-A0095A 9,50 0,15 12 153 360
26、1-A0112A 11,20 0,16 14 170 3601-A0132A 13,20 0,17 16 192 3601-A0150A 15,00 0,18 18 214 3601-A0170A 17,00 0,20 20 231 3601-A0190A 19,00 0,21 22 253 3601-A0212A 21,20 0,22 25 295 3601-A0236A 23,60 0,24 28 320 3601-A0265A 26,50 0,25 32 350 3601-A0300A 30,00 0,27 aCorresponds to the pipe nominal outside
27、 diameter. bAccording to ISO 3601-1, for dimensional reference only, see EN 2608. 4 Designation EXAMPLE Identity block EN 2607 10 Number of this standard Code (see Table 1) EN 2607:2005Licensed Copy: Wang Bin, na, Fri Apr 14 03:09:37 BST 2006, Uncontrolled Copy, (c) BSIblankLicensed Copy: Wang Bin,
28、na, Fri Apr 14 03:09:37 BST 2006, Uncontrolled Copy, (c) BSIBS EN 2607:2005BSI389 Chiswick High RoadLondonW4 4ALBSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international l
29、evel. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be gr
30、ateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual u
31、pdating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email:
32、ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides
33、 a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44
34、 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996
35、7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI
36、also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying,
37、recording or otherwise without prior written permission from BSI.This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.Licensed Copy: Wang Bin, na, Fri Apr 14 03:09:37 BST 2006, Uncontrolled Copy, (c) BSI
