1、BSI Standards PublicationBS EN 2833-005:2013Aerospace series Glass fibrethermosetting preimpregnates Technical specificationPart 005: Glass fabric/phenolic resinpreimpregnateCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networ
2、king permitted without license from IHS-,-,-BS EN 2833-005:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 2833-005:2013.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/65, Non-metallic materials for aerospace purposes.A list
3、 of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013.Published by BSI Standards Limit
4、ed 2013ISBN 978 0 580 81716 8 ICS 49.025.40Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 August 2013.Amendments issued since publicationDate Text affectedThi
5、s British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 September 2013.Amendments/corrigenda issued since publicationDate Text affectedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction
6、 or networking permitted without license from IHS-,-,-BS EN 2833-005:2013EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 2833-005 August 2013 ICS 49.025.40 English Version Aerospace series - Glass fibre thermosetting preimpregnates - Technical specification - Part 005: Glass fabric/phenolic res
7、in preimpregnate Srie arospatiale - Primprgns de verre textile/rsine thermodurcissable - Spcification technique - Partie 005 : Verre textile/rsine phnolique primprgns Luft- und Raumfahrt - Warmhrtbare Glasfaser - Prepregs -Technische Lieferbedingungen - Teil 005: Gewebe - Prepregs aus Glasfaser und
8、Phenolharz This European Standard was approved by CEN on 8 May 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographic
9、al references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility
10、of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of M
11、acedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION
12、EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2833-005:2013: ECopyright European Committee for Standardization Provided by IHS under license
13、 with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 2833-005:2013EN 2833-005:2013 (E)2Contents PageForeword3 1 Scope 4 2 Normative references 4 3 Definitions, abbreviations.5 4 Material description.5 5 Testing 6 5.1 Screening6 5.2 Qualification .6 5.3 Ba
14、tch release .6 BS EN 2833-005:2013EN 2833-005:2013 (E)3ForewordThis document (EN 2833-005:2013) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN).After enquiries and votes carried out in accordance with the rules of this Association, this St
15、andard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN.This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the lates
16、t by February 2014, and conflicting national standards shall be withdrawn at the latest by February 2014.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all s
17、uch patent rights.According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Mace
18、donia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.Copyright European Committee for Standardization Provided by IHS under
19、 license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 2833-005:2013EN 2833-005:2013 (E)2Contents PageForeword3 1 Scope 4 2 Normative references 4 3 Definitions, abbreviations.5 4 Material description.5 5 Testing 6 5.1 Screening6 5.2 Qualification .
20、6 5.3 Batch release .6 BS EN 2833-005:2013EN 2833-005:2013 (E)3ForewordThis document (EN 2833-005:2013) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN).After enquiries and votes carried out in accordance with the rules of this Association,
21、 this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN.This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at t
22、he latest by February 2014, and conflicting national standards shall be withdrawn at the latest by February 2014.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any
23、or all such patent rights.According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic
24、 of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.Copyright European Committee for Standardization Provided by I
25、HS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 2833-005:2013EN 2833-005:2013 (E)41 ScopeThis standard specifies the requirements for glass fabric/phenolic resin preimpregnates.It shall be used together with EN 2833-1.2 Normative refe
26、rencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.EN
27、 2155-12 Aerospace series Test methods for transparent materials for aircraft glazing Part 12: Determination of linear thermal expansionEN 2377 Aerospace series Glass fibre reinforced plastics Test method Determination of apparent interlaminar shear strengthEN 2379 Aerospace series Fluids for assess
28、ment of non-metallic materialsEN 2489 Aerospace series Fibre reinforced plastics Determination of the action of test fluidsEN 2743 Aerospace series Fibre reinforced plastics Standard procedures for conditioning prior to testing unaged materialsEN 2824 Aerospace series Burning behaviour of non-metall
29、ic materials under the influence of radiating heat and flames Determination of smoke density and gas components in the smoke of materials Test equipment, apparatus and mediaEN 2825 Aerospace series Burning behaviour of non-metallic materials under the influence of radiating heat and flames Determina
30、tion of smoke densityEN 2826 Aerospace series Burning behaviour of non-metallic materials under the influence of radiating heat and flames Determination of gas components in the smokeEN 3783 Aerospace series Fibre composite materials Normalization of fibre dominated mechanical propertiesEN 3844-1 Ae
31、rospace series Flammability of non-metallic materials Part 1: Small burner test, vertical Determination of the vertical flame propagationEN 38344-2 Aerospace series Flammability of non-metallic materials Part 2: Small burner test, horizontal Determination of the horizontal flame propagation1)EN 3844
32、-3 Aerospace series Flammability of non-metallic materials Part 3: Small burner test, 45 Determination of the resistance of material to flame and glow propagation and to flame penetrationISO 1183-2 Plastics Methods for determining the density of non-cellular plastics Part 2: Density gradient column
33、methodISO 1889 Reinforcement yarns Determination of linear densityISO 3572 Textiles Weaves Definitions of general terms and basic weavesprEN 2823 Aerospace series Fibre reinforced plastics Determination of the effect of exposure to humid atmosphere on physical and mechanical characteristics1)BS EN 2
34、833-005:2013EN 2833-005:2013 (E)5prEN 2833-1 Aerospace series Glass fibre thermosetting preimpregnates Technical specification Part 1: General requirements1)prEN 3615 Aerospace series Fibre reinforced plastics Determination of the conditions of exposure to humid atmosphere and of moisture absorption
35、1)prEN 3703 Aerospace series Heat release rate for materials and products under the influence of radiating heat and flames Test method 1)prEN 6032 Aerospace series Fibre reinforced plastics Test method Determination of the glass transition temperatures1)prEN 6037 Aerospace series Fibre reinforced pl
36、astics Test method Determination of bearing strength1)prEN 7000-1 Aerospace series Non-metallic materials Rules for the drafting and presentation of material standards Part 1: General rules1)ASTM D-2520 Standard Test Methods for Complex Permittivity (Dielectric Constant) of Solid Electrical Insulati
37、ng Materials at Microwave Frequencies and Temperatures to 1 650 C2)3 Definitions, abbreviationsNot applicable.4 Material descriptionSee table 1.Table 1 Description of preimpregnate materialParameter TypeResinType PhenolicGrade Flame resistantReinforcementFibre “E” glassForm Fabric in accordance with
38、 ISO 35721) Published as ASD-STAN Prestandard at the date of publication of this standard2) Published by: American Society for Testing and Materials (ASTM), 1916 Race Street, Philadelphia, PA 19103, USA.Copyright European Committee for Standardization Provided by IHS under license with CENNot for Re
39、saleNo reproduction or networking permitted without license from IHS-,-,-BS EN 2833-005:2013EN 2833-005:2013 (E)41 ScopeThis standard specifies the requirements for glass fabric/phenolic resin preimpregnates.It shall be used together with EN 2833-1.2 Normative referencesThe following documents, in w
40、hole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.EN 2155-12 Aerospace series Test meth
41、ods for transparent materials for aircraft glazing Part 12: Determination of linear thermal expansionEN 2377 Aerospace series Glass fibre reinforced plastics Test method Determination of apparent interlaminar shear strengthEN 2379 Aerospace series Fluids for assessment of non-metallic materialsEN 24
42、89 Aerospace series Fibre reinforced plastics Determination of the action of test fluidsEN 2743 Aerospace series Fibre reinforced plastics Standard procedures for conditioning prior to testing unaged materialsEN 2824 Aerospace series Burning behaviour of non-metallic materials under the influence of
43、 radiating heat and flames Determination of smoke density and gas components in the smoke of materials Test equipment, apparatus and mediaEN 2825 Aerospace series Burning behaviour of non-metallic materials under the influence of radiating heat and flames Determination of smoke densityEN 2826 Aerosp
44、ace series Burning behaviour of non-metallic materials under the influence of radiating heat and flames Determination of gas components in the smokeEN 3783 Aerospace series Fibre composite materials Normalization of fibre dominated mechanical propertiesEN 3844-1 Aerospace series Flammability of non-
45、metallic materials Part 1: Small burner test, vertical Determination of the vertical flame propagationEN 38344-2 Aerospace series Flammability of non-metallic materials Part 2: Small burner test, horizontal Determination of the horizontal flame propagation1)EN 3844-3 Aerospace series Flammability of
46、 non-metallic materials Part 3: Small burner test, 45 Determination of the resistance of material to flame and glow propagation and to flame penetrationISO 1183-2 Plastics Methods for determining the density of non-cellular plastics Part 2: Density gradient column methodISO 1889 Reinforcement yarns
47、Determination of linear densityISO 3572 Textiles Weaves Definitions of general terms and basic weavesprEN 2823 Aerospace series Fibre reinforced plastics Determination of the effect of exposure to humid atmosphere on physical and mechanical characteristics1)BS EN 2833-005:2013EN 2833-005:2013 (E)5pr
48、EN 2833-1 Aerospace series Glass fibre thermosetting preimpregnates Technical specification Part 1: General requirements1)prEN 3615 Aerospace series Fibre reinforced plastics Determination of the conditions of exposure to humid atmosphere and of moisture absorption1)prEN 3703 Aerospace series Heat release rate for materials and products under the influence of radiating heat and flames Test method 1)prEN 6032 Aerospace series Fibre reinforced plastics Test method Determination of the glass transition t
