1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 3417:2012Aerospace series Rivets,solid, universal head, in nickelbase alloy NI-P11, metric seriesBS EN 3417:2012 BRITISH STANDARDNational forewordThis British Standard is t
2、he UK implementation of EN 3417:2012. The UK participation in its preparation was entrusted to TechnicalCommittee ACE/12, Aerospace fasteners and fastening systems. A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to
3、include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2012Published by BSI Standards Limited 2012ISBN 978 0 580 75993 2 ICS 49.030.60 Compliance with a British Standard cannot confer immunity from legal obligations.Th
4、is British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2012.Amendments issued since publicationDate T e x t a f f e c t e dBS EN 3417:2012EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3417 March 2012 ICS 49.030.60 English Version Aeros
5、pace series - Rivets, solid, universal head, in nickel base alloy NI-P11, metric series Srie arospatiale - Rivets ordinaires, tte ronde aplatie, en alliage base de nickel NI-P11, srie mtrique Luft- und Raumfahrt - Vollniete, mit Universalkopf, aus Nickelbasislegierung NI-P11, metrische Reihe This Eu
6、ropean Standard was approved by CEN on 24 September 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical referenc
7、es concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN me
8、mber into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Icelan
9、d, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre:
10、Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3417:2012: EBS EN 3417:2012EN 3417:2012 (E) 2 Contents Page Foreword 31 Scope and field of application 42 Normative references 43 Required chara
11、cteristics .43.1 Configuration Dimensions Masses 43.2 Material .44 Designation 75 Marking .75.1 Rivet identification .75.2 Material identification 75.3 Metric identification .76 Technical specification .7BS EN 3417:2012EN 3417:2012 (E) 3 Foreword This document (EN 3417:2012) has been prepared by the
12、 Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD,
13、 prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2012, and conflicting national standards shall be withdrawn at the latest by September 2012. Attention
14、is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the f
15、ollowing countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, S
16、lovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 3417:2012EN 3417:2012 (E) 4 1 Scope and field of application This European Standard defines the characteristics of solid rivets, with universal head, metric series, in nickel base alloy, for maximum operating tempera
17、ture 650 C. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (includi
18、ng any amendments) applies. EN 2305, Nickel base alloy NI-P11 540 MPa Rm 620 MPa Bars and wires for rivets Aerospace series 1)EN 2424, Aerospace series Marking of aerospace products EN 2941, Aerospace series Nickel alloy rivets Technical specification ISO 8280, Aerospace Rivets, solid, universal hea
19、d, metallic material, with or without surface treatment Dimensions ISO 10299, Aerospace Rivets, solid Material and metric series identification 3 Required characteristics 3.1 Configuration Dimensions Masses See figure 1 and tables 1 and 2. 3.2 Material EN 2305 1) Published as ASD-STAN pre-standard a
20、t the date of publication of the present standard. BS EN 3417:2012EN 3417:2012 (E) 5 Non-radiused tail end (code “N“) Radiused tail end (code “R“) a, b Key a the length range is limited (see Table 2) b chamfer or convex radius, at manufacturers option c rounded edge permissible within limiting E dim
21、ensions d or (L-X)/2 if (L-X) D e drill start (code 1) optional Figure 1 Table 1 aDimensions in millimetres Diameter code D bE F H J K M P X d11 max. min. max. min. 2,00+ 0,08 max. min. max. min. 025 2,5 5,25 4,75 2,5 1,8 1,1 3 0,15 2 1,7 0,8 0,5 1,4 030 3 6,3 5,7 3 2,2 1,3 3,7 2,4 2,1 0,9 0,6 035 3
22、,5 7,35 6,65 3,5 2,6 1,6 4,3 0,25 2,8 2,45 1,05 0,7 1,6 040 4 8,4 7,6 4 3 1,8 4,9 3,2 2,8 1,2 0,8 050 5 10,5 9,5 5 3,7 2,2 6,1 4 3,5 1,5 1 2 aValues in conformity with ISO 8280. bOver length X, D max. may increase by 0,03. BS EN 3417:2012EN 3417:2012 (E) 6 Table 2 a Dimensions in millimetres Diamete
23、r code 025 030 035 040 050 Length b Mass bMass bMass bMass bMass Code L5,00+N R kg/1 000 pieces cN R kg/1 000 pieces cN R kg/1 000 pieces cN R kg/1 000 pieces cN R kg/1 000 pieces c004 4 X X 0,327 X X 0,503 X X 0,728 005 5 X X 0,372 X X 0,564 X X 0,814 006 6 X X 0,414 X X 0,628 X X 0,898 X X 1,231 0
24、07 7 X X 0,455 X X 0,689 X X 0,981 X X 1,340 008 8 X X 0,500 X X 0,750 X X 1,065 X X 1,449 X X 2,447 009 9 X X 0,542 X X 0,811 X X 1,147 X X 1,558 X X 2,616 010 10 X X 0,584 X X 0,875 X X 1,231 X X 1,671 X X 2,790 011 11 X X 0,628 X X 0,936 X X 1,315 X X 1,780 X X 2,960 012 12 X X 0,670 X X 0,997 X
25、X 1,398 X X 1,889 X X 3,133 013 13 X X 0,712 X X 1,061 X X 1,481 X X 1,998 X X 3,303 014 14 X X 0,757 X X 1,122 X X 1,565 X X 2,107 X X 3,476 015 15 X X 0,798 X X 1,183 X X 1,651 X X 2,219 X X 3,649 016 16 X X 0,840 X X 1,244 X X 1,735 X X 2,328 X X 3,819 017 17 X 0,885 X X 1,308 X X 1,818 X X 2,437
26、 X X 3,992 018 18 X 0,927 X X 1,369 X X 1,901 X X 2,546 X X 4,162 019 19 X 0,972 X 1,430 X X 1,985 X X 2,655 X X 4,335 020 20 X 1,013 X 1,491 X X 2,068 X X 2,764 X X 4,505 022 22 X 1,097 X 1,616 X 2,235 X X 2,985 X X 4,848 024 24 X 1,183 X 1,738 X 2,402 X X 3,203 X X 5,191 026 26 X 1,270 X 1,863 X 2
27、,572 X 3,421 X X 5,533 028 28 X 1,353 X 1,985 X 2,738 X 3,643 X X 5,881 030 30 X 1,440 X 2,110 X 2,905 X 3,860 X 6,233 032 32 X 1,526 X 2,232 X 3,072 X 4,079 X 6,587 035 35 X 1,655 X 2,418 X 3,325 X 4,409 X 7,080 040 40 X 2,726 X 3,742 X 4,957 X 7,939 045 45 X 4,162 X 5,502 X 8,799 050 50 X 6,050 X
28、9,658 055 55 X 10,514 060 60 X 11,374 aLength-ranges are in conformity with ISO 8280. bTail end code (see figure 1). cApproximate values, calculated on the basis of 8,85 kg/dm3, given for information purpose only. BS EN 3417:2012EN 3417:2012 (E) 7 4 Designation EXAMPLE Description blockRIVET Identit
29、y block EN 3386 R 025 009 - 1 Number of EN Standard Tail end code (See figure 1) Diameter code (See table 1) Length code (See table 2) Drill start code (See figure 1) NOTE If necessary, the originator code I9005 shall be placed between the description block and the identity block. 5 Marking 5.1 Rive
30、t identification EN 2424, style G. 5.2 Material identification ISO 10299 5.3 Metric identification Dot, indented, on the tail end, the only criteria being legibility. 6 Technical specification EN 2941 This page deliberately left blankThis page deliberately left blankBSI is the independent national b
31、ody responsible for preparing British Standards and other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. BSI is incorporated by Royal Charter. British Standards and other standardisation products are published
32、by BSI Standards Limited.British Standards Institution (BSI)raising standards worldwideBSI389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards and PASs are periodically updated by amendment or revision. Users of British Standards and PASs should make sure that
33、they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using British Standards would inform the Secretary of the technical committee responsible, the ide
34、ntity of which can be found on the inside frontcover. Similary for PASs, please notify BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers BSI Subscribing Members an individual updating service called PLUS which ensures that subscribers automatically receive the latest
35、editions of British Standards and PASs.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, international and foreign standards publicatio
36、nscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, BSI will supply the British Standard implementation of the relevant international standard, unless otherwise requested.Information on standardsBSI pr
37、ovides a wide range of information on national, Europeanand international standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: BSI Subscribing Members are kept up to date with standards developments and receive substantial discounts on the purchase priceof s
38、tandards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards and PASs via British Standards Online can be found at information about British Standards is availa
39、ble on the BSI website at www.bsi- the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that own copyright in the information used (such as the international standardisation bodies) has f
40、ormally licensed such information to BSI for commerical publication and use. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise wi
41、thout prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Department.Tel: +44 (0)20 8996 7070Email:
