BS EN 3677-2007 Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted - Solution treated and precipitation treated - Forgings - a or D 200 mm - Rm 1310 MPa《航空航天系列 FE-PM380.pdf

上传人:sofeeling205 文档编号:550922 上传时间:2018-12-09 格式:PDF 页数:10 大小:404.65KB
下载 相关 举报
BS EN 3677-2007 Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted - Solution treated and precipitation treated - Forgings - a or D 200 mm - Rm 1310 MPa《航空航天系列 FE-PM380.pdf_第1页
第1页 / 共10页
BS EN 3677-2007 Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted - Solution treated and precipitation treated - Forgings - a or D 200 mm - Rm 1310 MPa《航空航天系列 FE-PM380.pdf_第2页
第2页 / 共10页
BS EN 3677-2007 Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted - Solution treated and precipitation treated - Forgings - a or D 200 mm - Rm 1310 MPa《航空航天系列 FE-PM380.pdf_第3页
第3页 / 共10页
BS EN 3677-2007 Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted - Solution treated and precipitation treated - Forgings - a or D 200 mm - Rm 1310 MPa《航空航天系列 FE-PM380.pdf_第4页
第4页 / 共10页
BS EN 3677-2007 Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted - Solution treated and precipitation treated - Forgings - a or D 200 mm - Rm 1310 MPa《航空航天系列 FE-PM380.pdf_第5页
第5页 / 共10页
亲,该文档总共10页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

1、 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Air melted Solution treated and precipitation treated Forgings a or D k 200 mm Rm U 1 310 MPaThe Eu

2、ropean Standard EN 3677:2007 has the status of a British StandardICS 49.025.10Aerospace series Steel FE-PM3801 (X5CrNiCu17-4) BRITISH STANDARDBS EN 3677:2007BS EN 3677:2007This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2007 BSI 2007

3、ISBN 978 0 580 50599 7Amendments issued since publicationAmd. No. Date CommentsThis publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.N

4、ational forewordThis British Standard was published by BSI. It is the UK implementation of EN 3677:2007. The UK participation in its preparation was entrusted by Technical Committee ACE/61, Metallic materials for aerospace purposes, to Panel ACE/61/-/15, Steels.A list of organizations represented on

5、 this committee can be obtained on request to its secretary.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3677 March 2007 ICS 49.025.10 English Version Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted - Solution treated and precipitation treated - Forgings - a or D 200 mm - Rm 1

6、 310 MPa Srie arospatiale - Acier FE-PM3801 (X5CrNiCu17-4) - labor lair - Mis en solution et vieilli - Pices forges et pices matrices - a ou D 200 mm - Rm 1 310 MPa Luft- und Raumfahrt - Stahl FE-PM3801 (X5CrNiCu17-4) - Lufterschmolzen - Lsungsgeglht und ausgehrtet - Schmiedestcke - a oder D 200 mm

7、- Rm 1 310 MPa This European Standard was approved by CEN on 5 October 2006. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibli

8、ographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility

9、of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ire

10、land, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassar

11、t, 36 B-1050 Brussels 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3677:2007: E2 Foreword This document (EN 3677:2007) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-S

12、TAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the sta

13、tus of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2007, and conflicting national standards shall be withdrawn at the latest by September 2007. Attention is drawn to the possibility that some of the elements of this document may be th

14、e subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgi

15、um, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 3677:20073 Intro

16、duction This standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258. This standard has been prepared in accordance with EN 4500-5. 1 Scope This standard specifies the requirements relating to: Steel

17、 FE-PM3801 (X5CrNiCu17-4) Air melted Solution treated and precipitation treated Forgings a or D 200 mm Rm 1 310 MPa for aerospace applications. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cit

18、ed applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 3163, Aerospace series Steel FE-PM3801 (X5CrNiCu17-4) Air melted Softened Forging stock a or D 300 mm.1)EN 4050-4, Aerospace series Test method for metallic materials Ultrasonic i

19、nspection of bars, plates, forging stock and forgings Part 4: Acceptance criteria. 1)EN 4258, Aerospace series Metallic materials General organization of standardization Links between types of EN standards and their use. EN 4500-5, Aerospace series Metallic materials Rules for drafting and presentat

20、ion of material standards Part 5: Specific rules for steels. 1)EN 4700-006, Aerospace series Steel and heat resisting alloys Wrought products Technical specification Part 006: Pre-production and production forgings. 2)1) Published as ASD Prestandard at the date of publication of this standard. 2) In

21、 preparation at the date of publication of this standard. EN 3677:20074 1 Material designation Steel FE-PM3801 (X5CrNiCu17-4) Element C Si Mn P S Cr Mo Ni Cu Nb+Ta Fe min. 15,0 3,0 3,0 5 C 2 Chemical composition % max. 0,07 1,00 1,00 0,030 0,015 17,5 0,50 5,0 5,0 0,45 Base 3 Method of melting Air me

22、lted 4.1 Form Forgings 4.2 Method of production Forged from forging stock EN 3163 4.3 Limit dimension(s) mm a or D 200 5 Technical specification EN 4700-006 Delivery condition Solution treated Solution treated and precipitation treated 6.1 Heat treatment 1 025 C 1 055 C / t 30 min / AC or faster+ co

23、ol to 30 C 1 025 C 1 055 C / t 30 min / AC or faster+ cool to 30 C + 470 C 490 C / t 1 h / AC 6.2 Delivery condition code W UUse condition Solution treated and precipitation treated Delivery condition 7 Heat treatment Delivery condition + 470 C 490 C / t 1 h / AC or faster Characteristics 8.1 Test s

24、ample(s) See EN 4700-006. 8.2 Test piece(s) See EN 4700-006. 8.3 Heat treatment Solution treated Use condition 9 Dimensions concerned mm a or D 75 75 a or D 200 10 Thickness of cladding on each face % 11 Direction of test piece L L T 12 Temperature C Ambient Ambient Ambient 13 Proof stress Rp0,2MPa

25、1 170 1 170 1 170 14 Strength RmMPa 1 310 1 310 1 310 15 Elongation A % 7,5 7 3 16 T Reduction of area Z % 30 25 17 Hardness 363 HB 388 HB 444 388 HB 444 18 Shear strength RcMPa 19 Bending k 20 Impact strength 21 Temperature C 22 Time h 23 Stress aMPa 24 Elongation a % 25 Rupture stress RMPa 26 C El

26、ongation at rupture A % 27 Notes (see line 98) EN 3677:20075 30 Microstructure See EN 4700-006.2 One per cast7 -ferrite content shall not exceed 5 % 34Grain size See EN 4700-006. 7G 444External defects See EN 4700-006.50 See EN 4700-006.1 EN 2951 2 One per castCleanliness/inclusion content (micro-cl

27、eanness) 7 Category 2 61 Internal defects See EN 4700-006. 1 EN 4050-4 6 a or D 200 mm may be tested either on the product or at an earlier stage of manufacturing 7 Class 2 82 Batch uniformity See EN 4700-006. 95 Marking inspection See EN 4700-006. 96 Dimensional inspection See EN 4700-006. 98 Notes

28、 99 Typical use EN 3677:20076 100 Product qualification Qualification programme to be agreed between manufacturer and purchaser. EN 3677:2007blankBS EN BSI389 Chiswick High RoadLondonW4 4AL3677:2007BSI British Standards InstitutionBSI is the independent national body responsible for preparing Britis

29、h Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the c

30、onstant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover.

31、 Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addre

32、ssed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published

33、 as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which g

34、ive details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For detai

35、ls of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- information about BSI is available on the B

36、SI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a

37、retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.

展开阅读全文
相关资源
  • BS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdfBS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdf
  • BS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdfBS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdf
  • BS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdfBS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdf
  • BS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdfBS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdf
  • BS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdfBS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdf
  • BS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdfBS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdf
  • BS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdfBS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdf
  • BS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdfBS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdf
  • BS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdfBS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdf
  • BS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdfBS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > BS

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1