1、Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 04 April 2005, Uncontrolled Copy, (c) BSIBRITISH STANDARD AEROSPACE SERIES BS EN 3741:2004 Nuts, clip, metric Installation holes and assembly The European Standard EN 3741:2004 has the status of a British Standard ICS 49.030.3
2、0 Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 04 April 2005, Uncontrolled Copy, (c) BSIBS EN 3741:2004 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 5 January 2005 BSI 5 January 2005 ISBN 0 580 45185 2 National
3、 foreword This British Standard is the official English language version of EN 3741:2004. It supersedes BS EN 3741:2003 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee ACE/12, Aerospace fasteners and fastening systems, which has the responsibility to:
4、 A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International S
5、tandards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Stan
6、dard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and Europe
7、an developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 7 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since pub
8、lication Amd. No. Date Comments Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 04 April 2005, Uncontrolled Copy, (c) BSIEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN3741 November2004 ICS49.030.30 SupersedesEN3741:2003 Englishversion AerospaceseriesNuts,clip,metricInsta
9、llationholesand assembly Sriearospatialecrouspincer,mtriquesTrous dinstallationetmontage LuftundRaumfahrtKlemmuttern,metrisch EinbaulcherundMontage ThisEuropeanStandardwasapprovedbyCENon11September2003. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivi
10、ngthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninany
11、otherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,
12、Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2004CEN Allright
13、sofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN3741:2004:E Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 04 April 2005, Uncontrolled Copy, (c) BSI EN 3741:2004 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative references 4 3 Princ
14、iple4 4 Design instructions .4 4.1 Support design 4 4.1.1 Installation A: “on flank of support“4 4.1.2 Installation B: “with slot“5 4.1.3 Dimensions.5 4.2 Type of installation 5 4.2.1 Installation A 5 4.2.2 Installation B 6 5 Indication on drawings6 5.1 Definition drawing .6 5.2 Assembly drawing.6 6
15、 Designation 7 Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 04 April 2005, Uncontrolled Copy, (c) BSIEN 3741:2004 (E) 3 Foreword This document (EN 3741:2004) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After en
16、quiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a nat
17、ional standard, either by publication of an identical text or by endorsement, at the latest by May 2005, and conflicting national standards shall be withdrawn at the latest by May 2005. This document supersedes EN 3741:2003. According to the CEN/CENELEC Internal Regulations, the national standards o
18、rganizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia
19、, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 04 April 2005, Uncontrolled Copy, (c) BSI EN 3741:2004 (E) 4 1 Scope This standard specifies the characteristics of the installation holes required for the utilization
20、 of clip nuts with design configuration to EN-Standards for aerospace applications. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of th
21、e referenced document (including any amendments) applies. EN 3726, Aerospace series Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), MoS 2coated Classification: 1 100 MPa (at ambient temperature) / 425 C 3 Principle The self-locking clip nuts are parts held in place on their suppo
22、rt by the elastic action of the nut cage. A centering piece located on the tab of the cage ensures the correct installation of the clip nut. Self-locking is ensured by the distortion of the last nut end threads. See Figure 1. Key 1 nut 2 cage 3 centering piece 4 support Figure 1 4 Design instruction
23、s 4.1 Support design 4.1.1 Installation A: “on flank of support“ See Figures 2 and 3. Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 04 April 2005, Uncontrolled Copy, (c) BSIEN 3741:2004 (E) 5 Figure 2 Figure 3 4.1.2 Installation B: “with slot“ See Figures 4 and 5. Key 1 F
24、 1 or F 2 aMinimum zone allowing the passage of the tabs depending of the mounting face (see Figure 5). All the shapes capable of enveloping this minimum zone are acceptable. Figure 4 Figure 5 4.1.3 Dimensions See Table 1. Table 1 Dimensions in millimetres C D E F 1F 2Support thickness Diameter code
25、 Thread 0,25 max. min. min. min. min. max. min. 040 MJ4X0,7 4H6H 7,1 7 13 050 MJ5X0,8 4H6H 7,5 7 14 14 060 MJ6X1 4H5H 9,5 9,1 8,6 19,5 6,5 16 2 0,9 4.2 Type of installation 4.2.1 Installation A install the clip nut on the edge of the support; apply pressure on the cage as illustrated on Figure 3, un
26、til the centering piece clears the edge of the support; push the clip nut until the centering piece locates in the hole. Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 04 April 2005, Uncontrolled Copy, (c) BSI EN 3741:2004 (E) 6 4.2.2 Installation B In the case of assembly
27、 on inner panels: slide the cage through the support access hole, as illustrated on Figure 5; proceed until the centering piece locates in the hole. 5 Indication on drawings 5.1 Definition drawing EXAMPLE: see Figure 6. Key aWay of assembly Figure 6 5.2 Assembly drawing EXAMPLE: see Figure 7. Key 1
28、clip nut EN 3726-050 Assembly EN 3741-050A Figure 7 Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 04 April 2005, Uncontrolled Copy, (c) BSIEN 3741:2004 (E) 7 6 Designation EXAMPLE Identity block EN3741-050A Number of this standard Diameter code (see Table 1) Type of insta
29、llation (see 4.2) Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 04 April 2005, Uncontrolled Copy, (c) BSIBS EN 3741:2004 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Stand
30、ards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the const
31、ant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel
32、: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addres
33、sed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published
34、 as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which
35、 give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For de
36、tails of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is availa
37、ble on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced
38、, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type
39、or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-. Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 04 April 2005, Uncontrolled Copy, (c) BSI
