噪音控制工程合同书.doc

上传人:hopesteam270 文档编号:556051 上传时间:2018-12-11 格式:DOC 页数:2 大小:22.31KB
下载 相关 举报
噪音控制工程合同书.doc_第1页
第1页 / 共2页
噪音控制工程合同书.doc_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、噪音控制工程合同书甲方:_ 乙方:_地址:_ 地址:_电话:_ 电话:_兹_(以下简称甲方)委托_电力设备有限公司(以下简称乙方)进行机房噪音控制工程。经双方友好协商达成具体条款如下:一、工程依据和技术指标1发电机组型号:_ ;冷却方式:_;台数:_。2技术指标根据(国家城市区域环境噪声标准GB3096-93)和工业企业厂界噪声控制标准噪声等效声级:_db(A)。评价点位置:_ 所属区域:_ 噪声标准:白天_db(A);晚上_db(A)。注:1如果背景噪声级超过此治理标准规定的指标时则以背景噪声为允许值。2根据GB3096-93规定,测量点选在受影响者的居住或工作建筑物外1米,传声器高于地面1

2、2米以上的噪声影响敏感处(例如窗外1米处)。二、噪音治理要求1噪音治理措施应当经济、有效、可靠,外表整齐美观。2噪音治理措施,不影响机组操作、维护、并应使得机房内有充足的新鲜空气进气量,以保证发电机正常运行。三、噪音治理措施采用机房全封闭,隔离噪声源方式。合理设计机房进风消音道和柴油机排气消音器。对机房内部作吸声处理以减小噪声扩散和减小室内混响声。具体治理项目见施工图和报价表。四、承接方式乙方承接甲方柴油发电机的噪声治理技术工程服务,承包整个工程所需材料、设备及人工安装费用。五、完成期限在合同签定,乙方收到第一期款五天内运料进场施工,整个噪音控制工程在_天内完成交付验收使用。六、施工条件及协作事项 _。七、工程费用及支付办法总工程费用为:_ 付款方式:合同签定时交付定金_;主材料进场后付_;工程完工后_天内付清余款。八、其它1若甲方无故不按时按额交付工程款,则乙方有权向甲方收取每天按工程总额_%的滞纳金。2在合同履行、工程施工过程中,如有异议,双方应本着保证工程质量,保证使用要求及施工过度的原则,协商解决。3本合同一式两份,甲乙方双方各执一份。一经签订,起法律效力。未尽事宜,双方友好协商解决,如遇双方未能解决则由乙方所在地法院仲裁。委托方(甲方):_承接方(乙方):_签订时间:_年_月_日

展开阅读全文
相关资源
猜你喜欢
  • BS EN 1093-2-2006+A1-2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Tracer gas method for the measurement of the emission rate of a given .pdf BS EN 1093-2-2006+A1-2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Tracer gas method for the measurement of the emission rate of a given .pdf
  • BS EN 1093-3-2006+A1-2008 Safety of machinery — nEvaluation of the nemission of airborne nhazardous nsubstances — nPart 3 Test bench method for the nmeasurement of the emission rat.pdf BS EN 1093-3-2006+A1-2008 Safety of machinery — nEvaluation of the nemission of airborne nhazardous nsubstances — nPart 3 Test bench method for the nmeasurement of the emission rat.pdf
  • BS EN 1093-6-1998+A1-2008 Safety of machinery — nEvaluation of the nemission of airborne nhazardous nsubstances — nPart 6 Separation efficiency by mass nunducted outlet《机械安全 降低气载有害.pdf BS EN 1093-6-1998+A1-2008 Safety of machinery — nEvaluation of the nemission of airborne nhazardous nsubstances — nPart 6 Separation efficiency by mass nunducted outlet《机械安全 降低气载有害.pdf
  • BS EN 1093-8-1998+A1-2008 Safety of machinery — nEvaluation of the nemission of airborne nhazardous nsubstances — nPart 8 Pollutant concentration nparameter test bench method《机械安全 .pdf BS EN 1093-8-1998+A1-2008 Safety of machinery — nEvaluation of the nemission of airborne nhazardous nsubstances — nPart 8 Pollutant concentration nparameter test bench method《机械安全 .pdf
  • BS EN 1094-1-2008 Insulating refractory products - Terminology classification and methods of test for high temperature insulation wool products《绝缘耐火产品 高温绝缘羊毛制品试验方法、术语和分类》.pdf BS EN 1094-1-2008 Insulating refractory products - Terminology classification and methods of test for high temperature insulation wool products《绝缘耐火产品 高温绝缘羊毛制品试验方法、术语和分类》.pdf
  • BS EN 1094-2-1999 Insulating refractory products - Classification of shaped products《绝缘耐火产品 成型产品的分类》.pdf BS EN 1094-2-1999 Insulating refractory products - Classification of shaped products《绝缘耐火产品 成型产品的分类》.pdf
  • BS EN 1094-4-1995 Insulating refractory products - Determination of bulk density and true porosity《绝缘用耐火产品 第4部分 成型产品的体积密度和真实气孔率的测定》.pdf BS EN 1094-4-1995 Insulating refractory products - Determination of bulk density and true porosity《绝缘用耐火产品 第4部分 成型产品的体积密度和真实气孔率的测定》.pdf
  • BS EN 1094-6-2000 Insulating refractory products - Determination of permanent change in dimensions of shaped products on heating《绝热耐火产品 加热作用下成型产品尺寸永久性变化的测定》.pdf BS EN 1094-6-2000 Insulating refractory products - Determination of permanent change in dimensions of shaped products on heating《绝热耐火产品 加热作用下成型产品尺寸永久性变化的测定》.pdf
  • BS EN 1096-1-2012 Glass in building Coated glass Definitions and classification《建筑玻璃 涂层玻璃 定义和分类》.pdf BS EN 1096-1-2012 Glass in building Coated glass Definitions and classification《建筑玻璃 涂层玻璃 定义和分类》.pdf
  • 相关搜索

    当前位置:首页 > 办公文档 > 公文模板

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1