钻井施工合同.doc

上传人:syndromehi216 文档编号:563603 上传时间:2018-12-11 格式:DOC 页数:2 大小:25.85KB
下载 相关 举报
钻井施工合同.doc_第1页
第1页 / 共2页
钻井施工合同.doc_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、钻井施工合同甲方:_乙方:_甲方因开采地下水资源,委托乙方承担钻井施工任务,经协商达成一致,签订以下合同条款,共同遵照履行。一、承包方法:包工包料,不负责税款及水电费用。二、施工任务与技术要求:1裸眼钻探,扩孔成井,安装井管,填料固井,封井洗井。2数量1眼,井深暂定130米,具体成井深度乙方可根据实际地质情况与甲方协商确定。3井孔埋径上部门600mm,下部至终孔273mm。4井管采用螺旋325mm5护壁,具体安装深度乙方按实际地质情况而定(整体基岩不下管)。5水量8-10/m3为合格井,达到8/m3为合格井,达不到8/m3双方可协商处理。如协商不成,甲方应承担总工程款的30%,乙方承担总工程款

2、的70%。三、工期:暂定45天,遇天气原因,停电、停机、人力不可抗拒因素,工期顺延。四、工程造价与付款方法:1包工包料每米_元。工程总造价_元(根据实际进尺米数结算)。2设备进场向乙方付款_元。用于设备维护,职工生活,生产保证资金。井孔完成下管前付总工程款的_%元。水井出水后10日内,如没有质量问题,付清剩余工程款。若不按合格约定付款,每天按总款的5%赔偿给乙方违约金。五、双方的责任及义务甲方:1负责电测深勘探及确定井位;2设备进场前,保证水、电、路三通至施工现场提供足够的电容量。3场地平整及泥浆池开挖。4派专人负责,及时协商施工中需解决和干扰施工的因素。5及时组织验收,水井出水10日内无异议为称交甲方使用,出现非质量问题,乙方不承担责任。乙方:1及时组织施工人员及设备,进入场地,开展施工。2按照技术要求及操作规范,保证质量,按时完成任务。3在施工期间安全事故由乙方负责。4及时向甲方汇报生产进度及生产技术指标。六、争议的解决1本合同未尽事宜,双方另行协商解决。2如发生争议时由上级主管部门调解,调解不成,可向当地人民法院起诉。3该合同一式两份,甲乙双方各执一份。自双方签字之日起生效,双方各自履行完责任和义务后自行失效。甲方:_ 乙方:_负责人:_ 负责人:_电话:_ 电话:_签订日期:_年_月_日

展开阅读全文
相关资源
猜你喜欢
  • ASTM E1248-1990(2017) Standard Practice for Shredder Explosion Protection《切碎机防爆的标准实施规程》.pdf ASTM E1248-1990(2017) Standard Practice for Shredder Explosion Protection《切碎机防爆的标准实施规程》.pdf
  • ASTM E1249-2000(2005) Standard Practice for Minimizing Dosimetry Errors in Radiation Hardness Testing of Silicon Electronic Devices Using Co-60 Sources《使用Co-60源的硅电子设备的辐射硬性试验的最小剂量测定.pdf ASTM E1249-2000(2005) Standard Practice for Minimizing Dosimetry Errors in Radiation Hardness Testing of Silicon Electronic Devices Using Co-60 Sources《使用Co-60源的硅电子设备的辐射硬性试验的最小剂量测定.pdf
  • ASTM E1249-2010 Standard Practice for Minimizing Dosimetry Errors in Radiation Hardness Testing of Silicon Electronic Devices Using Co-60 Sources《用钴60源以最大程度上减少硅电子装置辐射强度试验的剂量测定误差的标准.pdf ASTM E1249-2010 Standard Practice for Minimizing Dosimetry Errors in Radiation Hardness Testing of Silicon Electronic Devices Using Co-60 Sources《用钴60源以最大程度上减少硅电子装置辐射强度试验的剂量测定误差的标准.pdf
  • ASTM E1249-2015 Standard Practice for Minimizing Dosimetry Errors in Radiation Hardness Testing of Silicon Electronic Devices Using Co-60 Sources《使用Co-60源实现硅电子设备辐射硬性试验的剂量测定错误最小化的标准.pdf ASTM E1249-2015 Standard Practice for Minimizing Dosimetry Errors in Radiation Hardness Testing of Silicon Electronic Devices Using Co-60 Sources《使用Co-60源实现硅电子设备辐射硬性试验的剂量测定错误最小化的标准.pdf
  • ASTM E1250-1988(2005) Standard Test Method for Application of Ionization Chambers to Assess the Low Energy Gamma Component of Cobalt-60 Irradiators Used in Radiation-Hardness Testi.pdf ASTM E1250-1988(2005) Standard Test Method for Application of Ionization Chambers to Assess the Low Energy Gamma Component of Cobalt-60 Irradiators Used in Radiation-Hardness Testi.pdf
  • ASTM E1250-2010 Standard Test Method for Application of Ionization Chambers to Assess the Low Energy Gamma Component of Cobalt-60 Irradiators Used in Radiation-Hardness Testing of .pdf ASTM E1250-2010 Standard Test Method for Application of Ionization Chambers to Assess the Low Energy Gamma Component of Cobalt-60 Irradiators Used in Radiation-Hardness Testing of .pdf
  • ASTM E1250-2015 Standard Test Method for Application of Ionization Chambers to Assess the Low Energy Gamma Component of Cobalt-60 Irradiators Used in Radiation-Hardness Testing of .pdf ASTM E1250-2015 Standard Test Method for Application of Ionization Chambers to Assess the Low Energy Gamma Component of Cobalt-60 Irradiators Used in Radiation-Hardness Testing of .pdf
  • ASTM E1251-2007 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Atomic Emission Spectrometry《用原子发射光谱法分析铝和铝合金的标准试验方法》.pdf ASTM E1251-2007 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Atomic Emission Spectrometry《用原子发射光谱法分析铝和铝合金的标准试验方法》.pdf
  • ASTM E1251-2011 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry《采用火花原子发射光谱法分析铝和铝合金的标准试验方法》.pdf ASTM E1251-2011 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry《采用火花原子发射光谱法分析铝和铝合金的标准试验方法》.pdf
  • 相关搜索
    资源标签

    当前位置:首页 > 办公文档 > 公文模板

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1