1、BS EN 12101-2:2017Smoke and heat controlsystemsPart 2: Natural smoke and heat exhaustventilatorsBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 12101-2:2017 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 12101-2:2017.It su
2、persedes BS EN 12101-2:2003 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee FSH/25, Smoke, heat control systems and components.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not pur
3、port to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2017. Published by BSI Standards Limited 2017ISBN 978 0 580 86290 8ICS 13.220.20; 23.120Compliance with a British Standard cannot confer immunity fromlegal o
4、bligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 April 2017.Amendments/corrigenda issued since publicationDate Text affectedBS EN 12101-2:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12101-2 March 2017 ICS 13.220.99 Su
5、persedes EN 12101-2:2003English Version Smoke and heat control systems - Part 2: Natural smoke and heat exhaust ventilators Systmes pour le contrle des fumes et de la chaleur -Partie 2 : Dispositifs dvacuation naturelle de fumes et de chaleur Rauch- und Wrmefreihaltung - Teil 2: Natrliche Rauch- und
6、 Wrmeabzugsgerte This European Standard was approved by CEN on 11 January 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bi
7、bliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the resp
8、onsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Re
9、public of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPE
10、N DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12101-2:2017 EBS EN 12101-2:2017EN 12101-2:2017 (E) 2 Contents
11、Page European foreword . 5 Introduction 6 1 Scope 7 2 Normative references 7 3 Terms, definitions, symbols and abbreviations . 7 3.1 Terms and definitions . 7 3.2 Symbols and abbreviations 11 4 Requirements 13 4.1 Nominal activation conditions/sensitivity . 13 4.1.1 Initiation device 13 4.1.2 Openin
12、g mechanism 14 4.1.3 Inputs and outputs . 14 4.2 Response delay (response time) 14 4.2.1 Reliability 14 4.2.2 Opening under (snow/wind) load . 14 4.2.3 Low ambient temperature 15 4.2.4 Opening under heat . 15 4.3 Operational reliability 15 4.4 Effectiveness of smoke/hot gas extraction (aerodynamic f
13、ree area) . 15 4.5 Performance parameters under fire conditions . 15 4.5.1 Resistance to heat 15 4.5.2 Mechanical stability 16 4.5.3 Reaction to fire 16 4.6 Performance under environmental conditions 16 4.6.1 Opening under load . 16 4.6.2 Low ambient temperature 16 4.6.3 Stability under wind load 16
14、 4.6.4 Resistance to wind-induced vibration 16 4.6.5 Resistance to heat 16 4.7 Durability 17 4.7.1 Response delay (response time) 17 4.7.2 Operational reliability 17 4.7.3 Performance parameters under fire conditions . 17 5 Testing, assessment and sampling methods 17 6 Assessment and verification of
15、 constancy of performance - AVCP 19 6.1 General . 19 6.2 Type Testing . 19 6.2.1 General . 19 6.2.2 Test samples, testing and compliance criteria 20 6.2.3 Test sequence 21 6.2.4 Test reports 22 6.2.5 Cascading determination of the product type results 22 6.3 Factory production control 23 6.3.1 Gener
16、al . 23 BS EN 12101-2:2017EN 12101-2:2017 (E) 3 6.3.2 Requirements . 23 6.3.3 NSHEV specific requirements . 25 6.3.4 Initial inspection of factory and FPC 26 6.3.5 Continuous surveillance of FPC . 26 6.3.6 Procedure for modifications . 27 6.3.7 Pre-production prototypes . 27 7 Marking, labelling and
17、 packaging . 28 Annex A (normative) Classification 29 A.1 Nominal activation condition/sensitivity 29 A.2 Response delay 29 A.3 Operational Reliability . 29 A.4 Effectiveness of smoke/hot gas extraction (aerodynamic free area) 29 A.5 Performance parameters under fire conditions . 29 A.6 Performance
18、under environmental conditions . 30 A.7 Durability. 31 A.7.1 Response delay (response time) . 31 A.7.2 Operational reliability 31 A.7.3 Performance parameters under fire conditions . 31 Annex B (normative) Effectiveness of smoke/hot gas extraction (aerodynamic free area) 32 B.1 Determination of the
19、aerodynamic free area . 32 B.2 Simple assessment procedure . 32 B.2.1 General . 32 B.2.2 Roof mounted NSHEV 32 B.2.3 Wall mounted NSHEV 32 B.3 Experimental procedure 33 B.3.1 General . 33 B.3.2 Test apparatus . 33 B.3.3 Test specimen 34 B.3.4 Test procedure 35 B.3.5 Evaluation of test results . 36 B
20、.3.6 Calculation of the coefficient of discharge for a family of NSHEV . 37 B.4 Test to check the aerodynamic test installations 38 B.4.1 General . 38 B.4.2 Reference test without side wind . 39 B.4.3 Reference tests with side wind 39 B.4.4 Evaluation of test results . 39 Annex C (normative) Test me
21、thod for operational reliability and response time 54 C.1 Objective of test . 54 C.2 Test conditions 54 C.3 Test apparatus . 54 C.4 Test specimen 54 C.5 Test procedure 54 Annex D (normative) Test method for opening under load . 56 D.1 Objective of test . 56 D.2 Test conditions 56 D.3 Test apparatus
22、. 56 D.4 Test specimen 57 D.5 Test procedure 57 Annex E (normative) Test method for low ambient temperature . 58 E.1 Objective of test . 58 BS EN 12101-2:2017EN 12101-2:2017 (E) 4 E.2 Test apparatus. 58 E.3 Test specimen 58 E.4 Test procedure 58 Annex F (normative) Test method for stability under wi
23、nd load 59 F.1 Objective of test 59 F.2 Test conditions 59 F.3 Test apparatus. 59 F.4 Test specimen 59 F.5 Test procedure 60 F.5.1 Wind load 60 F.5.2 Vibration . 60 Annex G (normative) Test method for resistance to heat 61 G.1 Objective of the test . 61 G.2 Test apparatus. 61 G.2.1 Test furnace 61 G
24、.2.2 Temperature measurement . 61 G.2.3 NSHEV mount . 61 G.3 Test specimen 62 G.3.1 General . 62 G.3.2 NSHEV mounted to a glazed partition construction 62 G.3.3 Roof mounted NSHEV as part of a continuous rooflight . 62 G.3.4 Wall mounted NSHEV 63 G.3.5 Roof mounted NSHEV 63 G.4 Test procedure 64 Ann
25、ex H (normative) Mounting and fixing conditions for the SBI or small flame tests 72 H.1 General . 72 H.2 Class E . 73 H.2.1 General . 73 H.2.2 Small flame test in accordance to EN ISO 11925-2 . 73 H.3 Class A2 to class D 73 H.3.1 General . 73 H.3.2 Single Burning Item test (SBI) . 74 H.4 Heat of com
26、bustion test . 74 Annex I (normative) Handling changes affecting declared performances for NSHEV . 75 I.1 General . 75 I.2 Effectiveness of smoke/hot gas extraction . 75 I.3 Reliability 75 I.4 Opening under load . 76 I.5 Opening at low ambient temperatures 76 I.6 Wind load 77 I.7 Resistance to heat
27、77 Annex J (informative) Installation and maintenance information 78 J.1 Installation information 78 J.2 Maintenance information 78 Bibliography . 88 BS EN 12101-2:2017EN 12101-2:2017 (E) 5 European foreword This document (EN 12101-2:2017) has been prepared by Technical Committee CEN/TC 191 “Fixed f
28、irefighting systems”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2017, and conflicting national standards shall be withdrawn at the latest b
29、y December 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12101-2:2003. This document has been prep
30、ared under a mandate given to CEN by the European Commission and the European Free Trade Association and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this standard. This European Standard is one of t
31、he parts of the European Standard EN 12101 covering smoke and heat control systems. This European Standard has the general title Smoke and heat control systems and currently consists of the following parts: Part 1: Specification for smoke barriers; Part 2: Natural smoke and heat exhaust ventilators
32、the present document; Part 3: Specification for powered smoke and heat exhaust ventilators; Part 4: Installed SHEVS systems for smoke and heat ventilation Technical Report CEN/TR 12101-4; Part 5: Guidelines on functional recommendations and calculation methods for smoke and heat exhaust ventilation
33、systems Technical Report CEN/TR 12101-5; Part 6: Specification for pressure differential systems Kits; Part 7: Smoke control sections; Part 8: Smoke control dampers; Part 10: Power supplies. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following coun
34、tries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Po
35、land, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 12101-2:2017EN 12101-2:2017 (E) 6 Introduction In a fire situation, smoke and heat exhaust ventilation systems create and maintain a smoke free layer above the floor by removing smok
36、e. They also serve simultaneously to exhaust hot gases released by a fire in the developing stages. The use of such systems to create smoke-free areas beneath a buoyant layer has become widespread. Their value in assisting in the evacuation of people from buildings and other construction works, redu
37、cing fire damage and financial loss by preventing smoke damage, facilitating access for firefighting by improving visibility, reducing roof temperatures and retarding the lateral spread of fire is firmly established. For these benefits to be obtained it is essential that natural smoke and heat exhau
38、st ventilators (referred to in this standard as NSHEV) operate fully and reliably whenever called upon to do so during their installed life. A smoke and heat exhaust ventilation system (referred to in this standard as a SHEVS) is a system of safety equipment intended to perform a positive role in a
39、fire emergency. BS EN 12101-2:2017EN 12101-2:2017 (E) 7 1 Scope This European Standard applies to natural smoke and heat exhaust ventilators (NSHEV) operating as part of smoke and heat exhaust systems (SHEVS), placed on the market. This standard specifies requirements and gives test methods for natu
40、ral smoke and heat exhaust ventilators which are intended to be installed in smoke and heat control systems in buildings. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references,
41、only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 54-5:2017, Fire detection and fire alarm systems - Part 5: Heat detectors - Point detectors EN 54-7, Fire detection and fire alarm systems - Part 7: Smoke dete
42、ctors - Point detectors using scattered light, transmitted light or ionization EN 1363-1, Fire resistance tests - Part 1: General Requirements EN 12101-10, Smoke and heat control systems - Part 10: Power supplies EN 13501-1, Fire classification of construction products and building elements Part 1:
43、Classification using test data from reaction to fire tests EN 13823, Reaction to fire tests for building products Building products excluding floorings exposed to the thermal attack by a single burning item EN 60584-1, Thermocouples Part 1: EMF specifications and tolerances (IEC 60584-1) EN ISO 1182
44、, Reaction to fire tests for products - Non-combustibility test (ISO 1182) EN ISO 1716, Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716) EN ISO 11925-2, Reaction to fire tests - Ignitability of products subjected to direct impingement o
45、f flame - Part 2: Single-flame source test (ISO 11925-2) 3 Terms, definitions, symbols and abbreviations 3.1 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1.1 aerodynamic free area geometric area multiplied by the coefficient of discharge 3.1.2
46、 ambient word used to describe properties of the surroundings BS EN 12101-2:2017EN 12101-2:2017 (E) 8 3.1.3 automatic activation initiation of operation without direct human intervention 3.1.4 aspect ratio ratio of length to width 3.1.5 automatic natural smoke and heat exhaust ventilator natural smo
47、ke and heat exhaust ventilator (NSHEV) which is designed to open automatically after the outbreak of fire if called upon to do so Note 1 to entry: Automatic natural smoke and heat exhaust ventilator (NSHEV) can also be fitted with a manual control or release device. 3.1.6 comfort position position o
48、f a NSHEV defined by the manufacturer for the purpose of comfort ventilation 3.1.7 coefficient of discharge cvratio of actual flow rate, measured under specified conditions, to the theoretical flow rate through the NSHEV, as defined in Annex B Note 1 to entry: The coefficient takes into account any
49、obstructions in the NSHEV such as controls, louvres and vanes and the effect of external side wind. 3.1.8 dual purpose NSHEV NSHEV which has provision to allow its use for comfort (i.e. day to day) ventilation 3.1.9 fire open position configuration of the NSHEV specified by its designer to be achieved and sustained while venting smoke and heat 3.1.10 gas container vessel containing gas in a compressed form, the energy of which, when the gas is released from the vessel, will open the NSHEV 3.1.11 geometric area Avarea of the opening through
