1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 12697-6:2012Bituminous mixtures Testmethods for hot mix asphaltPart 6: Determination of bulk density ofbituminous specimensBS EN 12697-6:2012 BRITISH STANDARDNational forew
2、ordThis British Standard is the UK implementation of EN 12697-6:2012. It supersedes BS EN 12697-6:2003 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee B/510/1, Asphalt products.A list of organizations represented on this committee can be obtained on re
3、quest to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2012. Published by BSI Standards Limited 2012ISBN 978 0 580 75912 3 ICS 93.080.20 Compliance with a Bri
4、tish Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2012.Amendments issued since publicationDate Text affectedBS EN 12697-6:2012EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM E
5、N 12697-6 April 2012 ICS 93.080.20 Supersedes EN 12697-6:2003+A1:2007English Version Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens Mlanges bitumineux - Mthodes dessai pour mlange hydrocarbon chaud - Partie 6: Dtermination de la
6、 masse volumique apparente des prouvettes bitumineusesAsphalt - Prfverfahren fr Heiasphalt - Teil 6: Bestimmung der Raumdichte von Asphalt-Probekrpern This European Standard was approved by CEN on 9 March 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate
7、 the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Stand
8、ard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the nati
9、onal standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzer
10、land, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref
11、. No. EN 12697-6:2012: EBS EN 12697-6:2012EN 12697-6:2012 (E) 2 Contents Page Foreword 3g31 Scope 7g32 Normative references 7g33 Terms and definitions .7g34 Principle 7g35 Materials .8g35.1 General 8g35.2 Additional materials for the sealed specimen procedure .8g36 Apparatus .8g36.1 General 8g36.2 A
12、dditional apparatus for the dry, SSD and sealed specimen procedures.8g36.3 Additional apparatus for the SSD-procedure .8g36.4 Additional apparatus for the dimensions procedure .8g37 Sample sizes and sample handling .9g38 Preparation of sample .9g39 Procedure .9g39.1 General 9g39.2 Procedure A: Bulk
13、density dry.9g39.3 Procedure B: Bulk Density Saturated surface dry (SSD) 9g39.4 Procedure C: Bulk Density Sealed specimen . 10g39.5 Procedure D: Bulk density by dimensions 10g310 Calculation . 10g310.1 Procedure A: Bulk density dry 10g310.2 Procedure B: Bulk density SSD 11g310.3 Procedure C: Bulk de
14、nsity Sealed specimen 11g310.4 Procedure D: Bulk density by dimensions 12g310.4.1 Cylindrical specimen 12g310.4.2 Rectangular specimen . 12g311 Precision 12g311.1 General . 12g311.2 Repeatability (same observer same apparatus) . 13g311.3 Reproducibility (different observers different apparatus) . 13
15、g312 Test report . 13g3Annex A (informative) General guidance on selection of a test procedure to determine the bulk density of compacted bituminous materials . 14g3A.1 General . 14g3A.2 Background (see Figure A.1) . 14g3A.3 Guidance 15g3Bibliography . 17g3BS EN 12697-6:2012EN 12697-6:2012 (E) 3 For
16、eword This document (EN 12697-6:2012) has been prepared by Technical Committee CEN/TC 227 “Road materials”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by
17、 October 2012, and conflicting national standards shall be withdrawn at the latest by October 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such p
18、atent rights. This document supersedes EN 12697-6:2003+A1:2007. The significant changes from that document are: The density of water at test temperature is now obtained from a formula instead of a table; All densities are now expressed in megagram per cubic metre (Mg/m3) instead of in kilogram per c
19、ubic metre (kg/m3); The requirement for the thermometer used in dry, SSD or sealed specimen procedures has been changed; The requirement on the drying of specimens has been changed; The definition of constant mass has been changed; In procedure B, the order of carrying out steps a) to g), when testi
20、ng damp specimens, has been corrected; In procedure B, the Note concerning the saturation period of specimens has been changed and is now limited to a maximum; In procedure A, B and C, the specific requirement for the accuracy of the density of water when calculating the bulk density of specimens ha
21、s been deleted, with the general rule defined in Clause 5 “Materials” being applicable; In procedure C, the formula used to calculate “bulk density dry sealed specimen” has been corrected; In procedure D, the formula used to calculate “bulk density by dimensions” both of cylindrical and rectangular
22、specimens has been changed in order to be consistent with new density units; In the test report, a new paragraph with reference to dimensions of specimens has been added; In Annex A, a paragraph regarding specific requirements for particular method to be used for CE marking has been added. This Euro
23、pean Standard is one of a series of standards as listed below: EN 12697-1, Bituminous mixtures Test methods for hot mix asphalt Part 1: Soluble binder content EN 12697-2, Bituminous mixtures Test method for hot mix asphalt Part 2: Determination of particle size distribution BS EN 12697-6:2012EN 1269
24、7-6:2012 (E) 4 EN 12697-3, Bituminous mixtures Test methods for hot mix asphalt Part 3: Bitumen recovery: Rotary evaporator EN 12697-4, Bituminous mixtures Test methods for hot mix asphalt Part 4: Bitumen recovery: Fractionating column EN 12697-5, Bituminous mixtures Test methods for hot mix asphalt
25、 Part 5: Determination of the maximum density EN 12697-6, Bituminous mixtures Test methods for hot mix asphalt Part 6: Determination of bulk density of bituminous specimens EN 12697-7, Bituminous mixtures Test methods for hot mix asphalt Part 7: Determination of bulk density of bituminous specimens
26、by gamma rays EN 12697-8, Bituminous mixtures Test methods for hot mix asphalt Part 8: Determination of void characteristics of bituminous specimens EN 12697-10, Bituminous mixtures Test methods for hot mix asphalt Part 10: Compactability EN 12697-11, Bituminous mixtures Test methods for hot mix asp
27、halt Part 11: Determination of the affinity between aggregate and bitumen EN 12697-12, Bituminous mixtures Test methods for hot mix asphalt Part 12: Determination of the water sensitivity of bituminous specimens EN 12697-13, Bituminous mixtures Test methods for hot mix asphalt Part 13: Temperature m
28、easurement EN 12697-14, Bituminous mixtures Test methods for hot mix asphalt Part 14: Water content EN 12697-15, Bituminous mixtures Test methods for hot mix asphalt Part 15: Determination of the segregation sensitivity EN 12697-16, Bituminous mixtures Test methods for hot mix asphalt Part 16: Abras
29、ion by studded tyres EN 12697-17, Bituminous mixtures Test methods for hot mix asphalt Part 17: Particle loss of porous asphalt specimen EN 12697-18, Bituminous mixtures Test methods for hot mix asphalt Part 18: Binder drainage EN 12697-19, Bituminous mixtures Test methods for hot mix asphalt Part 1
30、9: Permeability of specimen EN 12697-20, Bituminous mixtures Test methods for hot mix asphalt Part 20: Indentation using cube or cylindrical specimens (CY) EN 12697-21, Bituminous mixtures Test methods for hot mix asphalt Part 21: Indentation using plate specimens EN 12697-22, Bituminous mixtures Te
31、st methods for hot mix asphalt Part 22: Wheel tracking EN 12697-23, Bituminous mixtures Test methods for hot mix asphalt Part 23: Determination of the indirect tensile strength of bituminous specimens EN 12697-24, Bituminous mixtures Test methods for hot mix asphalt Part 24: Resistance to fatigue BS
32、 EN 12697-6:2012EN 12697-6:2012 (E) 5 EN 12697-25, Bituminous mixtures Test methods for hot mix asphalt Part 25: Cyclic compression test EN 12697-26, Bituminous mixtures Test methods for hot mix asphalt Part 26: Stiffness EN 12697-27, Bituminous mixtures Test methods for hot mix asphalt Part 27: Sam
33、pling EN 12697-28, Bituminous mixtures Test methods for hot mix asphalt Part 28: Preparation of samples for determining binder content, water content and grading EN 12697-29, Bituminous mixtures Test methods for hot mix asphalt Part 29: Determination of the dimensions of a bituminous specimen EN 126
34、97-30, Bituminous mixtures Test methods for hot mix asphalt Part 30: Specimen preparation by impact compactor EN 12697-31, Bituminous mixtures Test methods for hot mix asphalt Part 31: Specimen preparation by gyratory compactor EN 12697-32, Bituminous mixtures Test methods for hot mix asphalt Part 3
35、2: Laboratory compaction of bituminous mixtures by a vibratory compactor EN 12697-33, Bituminous mixtures Test methods for hot mix asphalt Part 33: Specimen prepared by roller compactor EN 12697-34, Bituminous mixtures Test methods for hot mix asphalt Part 34: Marshall test EN 12697-35, Bituminous m
36、ixtures Test methods for hot mix asphalt Part 35: Laboratory mixing EN 12697-36, Bituminous mixtures Test methods for hot mix asphalt Part 36: Determination of the thickness of a bituminous pavement EN 12697-37, Bituminous mixtures Test methods for hot mix asphalt Part 37: Hot sand test for the adhe
37、sivity of binder on precoated chippings for HRA EN 12697-38, Bituminous mixtures Test methods for hot mix asphalt Part 38: Common equipment and calibration EN 12697-39, Bituminous mixtures Test methods for hot mix asphalt Part 39: Binder content by ignition EN 12697-40, Bituminous mixtures Test meth
38、ods for hot mix asphalt Part 40: In situ drainability EN 12697-41, Bituminous mixtures Test methods for hot mix asphalt Part 41: Resistance to de-icing fluids EN 12697-42, Bituminous mixtures Test methods for hot mix asphalt Part 42: Amount of coarse foreign matter in reclaimed asphalt EN 12697-43,
39、Bituminous mixtures Test methods for hot mix asphalt Part 43: Resistance to fuel EN 12697-44, Bituminous mixtures Test methods for hot mix asphalt Part 44: Crack propagation by semi-circular bending test FprEN 12697-45, Bituminous mixtures Test methods for hot mix asphalt Part 45: Saturation Ageing
40、Tensile Stiffness (SATS) conditioning test BS EN 12697-6:2012EN 12697-6:2012 (E) 6 FprEN 12697-46, Bituminous mixtures Test methods for hot mix asphalt Part 46: Low temperature cracking and properties by uniaxial tension tests EN 12697-47, Bituminous mixtures Test methods for hot mix asphalt Part 47
41、: Determination of the ash content of natural asphalts prEN 12697-49, Bituminous mixtures Test methods for hot mix asphalt Part 49: Determination of friction after polishing. The applicability of this European Standard is described in the product standards for bituminous mixtures. According to the C
42、EN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, L
43、ithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 12697-6:2012EN 12697-6:2012 (E) 7 1 Scope This European Standard describes test methods for determining the bulk density of a compacted bi
44、tuminous specimen. The test methods are intended for use with laboratory compacted specimens or specimens from the pavement after placement and compacting, either by coring or sawing. This European Standard describes the following four procedures, the choice of which is used being dependent on the e
45、stimated content and accessibility of voids in the specimen: a) bulk density dry (for specimens with a very closed surface); b) bulk density saturated surface dry (SSD) (for specimens with a closed surface); c) bulk density sealed specimen (for specimens with an open or coarse surface); d) bulk dens
46、ity by dimensions (for specimens with a regular surface and with geometric shapes, i.e. squares, rectangles, cylinders, etc.). NOTE Annex A (informative) gives general guidance on selecting the appropriate procedure. 2 Normative references The following documents, in whole or in part, are normativel
47、y referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12697-29:2002, Bituminous mixtures Test methods for hot mix asph
48、alt Part 29: Determination of the dimensions of a bituminous specimen EN 13108-20, Bituminous mixtures Material specifications Part 20: Type Testing 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 bulk density mass per unit volume, including the air voids, of a specimen at known test temperature 3.2 maximum density mass per unit volume, without air voids, of a bituminous mixture at known test temperature 4 Principle The bulk density of an intact compacted bituminous specimen
