1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS EN 13003-1:1999 The Eu
2、ropean Standard EN 13003-1:1999 has the status of a British Standard ICS 59.100.30 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Para-aramid fibre filament yarns Part 1: DesignationThis British Standard, having been prepared under the direction of the Sector Committee for Ma
3、terials and Chemicals, was published under the authority of the Standards Committee and comes into effect on 15 September 1999 BSI 09-1999 ISBN 0 580 32548 2 BS EN 13003-1:1999 Amendments issued since publication Amd. No. Date Comments National foreword This British Standard is the English language
4、version of EN 13003-1:1999. The UK participation in its preparation was entrusted to Technical Committee PRI/42, Fibre reinforced thermosetting plastics and prepregs, which has the responsibility to: aid enquirers to understand the text; present to the responsible European committee any enquiries on
5、 the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Sta
6、ndards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Stand
7、ard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover,
8、an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a back cover The BSI copyright notice displayed in this document indicates when the document was last issued.EUROPEAN STANDARD EN 13003-1 NORME EUROPENNE EUROPISCHE NORM April 1999 ICS 59.100.30 English version Para-ara
9、mid fibre filament yarns Part 1: Designation Fils en fibres de para-aramide Partie 1: Dsignation Para-Aramidfaser-Filamentgarne Teil 1: Bezeichnung This European Standard was approved by CEN on 4 March 1999. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate th
10、e conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in
11、 three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies o
12、f Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung C
13、entral Secretariat: rue de Stassart, 36 B-1050 Brussels 1999 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members Ref. No. EN 13003-1:1999 EPage 2 EN 13003-1:1999 BSI 09-1999 Foreword This European Standard has been prepared by Technical Committee C
14、EN/TC 249, Plastics, the Secretariat of which is held by IBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 1999, and conflicting national standards shall be withdrawn at the latest by O
15、ctober 1999. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands
16、, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. EN 13003 consists of the following parts, under the general title Para-aramid fibre filament yarns: Part 1: Designation Part 2: Methods of test and general specifications Part 3: Technical specifications Contents Foreword 2 1 Sco
17、pe 3 2 Normative references 3 3 Designation system 3 3.1 Data block 1 4 3.2 Data block 2 4 3.3 Data block 3 5 4 Example 5 5 Bibliography 6Page 3 EN 13003-1:1999 BSI 09-1999 1 Scope 1.1 This European Standard establishes a method of designation for para-aramid fibre filament yarns which may be used a
18、s the basis for specifications. 1.2 This designations system is for para-aramid fibre filament yarns used for the reinforcement of polymer composites to reinforce in mechanical properties. It does not apply to discontinuous fibres and para-aramid fibre products made in the form of staple yarns, wove
19、n fabrics, braids, knits, mats, etc. 1.3 It is not intended to imply that the fibres having the same designation give the same performances. This EN 13003-1 does not provide engineering data, performance data or data on processing conditions which may be required to specify a fibre for a particular
20、application and/or method of processing. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated refer
21、ences, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. EN 13003-3:1999, Para-aramid fibre filament yarns Technic
22、al specifications. 3 Designation system The designation for para-aramid fibre filament yarns is based on the following standardized pattern: Designation Identity block Individual item block European Standard number block Data block 1 Data block 2 Data block 3 The designation consists of an identity
23、block comprising the European Standard number and an individual item block. For unambiguous coding the individual item block is subdivided into data blocks comprising the following information: Data block No. 1 Identification of para-aramid fibre filament yarns; Data block No. 2 Designatory properti
24、es; Data block No. 3 Manufacturers code. To ensure legibility: the description block shall be separated from the standard number block by a comma; a space shall be inserted between blocks; the first character in the first individual item block shall be a dash; individual item blocks shall be separat
25、ed from each other by a comma; if a data block is not used, this shall be indicated by two inverted commas (”).Page 4 EN 13003-1:1999 BSI 09-1999 3.1 Data block 1 In this data para-aramid fibre filament yarns are identified by the letter A, followed by the letter C signifying continuous filament yar
26、ns. 3.2 Data block 2 In this data block the designatory properties are defined as follows: Position 1: The para-aramid fibre filament yarns are classified according to their type of tensile modulus in the following way: Designation Type of para-aramid fibre filament yarn Typical level of tensile mod
27、ulus (GPa) HM High modulus type 120 TM Tailor-made modulus type a) 60 a) Tailor-made modulus type includes all those yarns that are produced under the designation “Low modulus type” and “Intermediate modulus type”. Position 2: Tensile modulus of elasticity represented by a typical value or mean valu
28、e by a number of three figures which corresponds to the tensile modulus of elasticity in GPa. The number shall be rounded to 0 or 5 in the first place. For example: Number Typical level of tensile modulus of elasticity (GPa) 80 80 100 98 115 117 120 120 Position 3: Tensile strength represented by a
29、typical value or mean value by a number of two figures which corresponds to the thousands and hundreds digits of the tensile strength in MPa. Possible tens digits of the tensile strength shall be rounded off first. For example: Number Tensile strength 26 2 600 MPa 28 2 840 MPa 32 3 150 MPa Position
30、4: Linear density represented by the first three figures of the linear density in dtex which is given in Table 1 of prEN 13003-3:1998. This value represents the class of linear density. For example: Number Linear density class 124 1 240 dtex 797 7 970 dtexPage 5 EN 13003-1:1999 BSI 09-1999 3.3 Data
31、block 3 In this data block the manufacturers code is given. If desired, the designation may be completed with the manufacturers code permitting the incorporation of any complementary information that does not appear among the previous elements as pointed out below: number of single filaments per yar
32、n; diameter of single filament; twist number and direction; finish content of the yarn and designation of finish. 4 Example An example is given as follows. For a para-aramid fibre filament yarn: continuous filament yarn; high modulus type; tensile modulus of elasticity 121 GPa; tensile strength of 3
33、 150 MPa; linear density of 1 600 dtex; manufacturer X. The designation is:Page 6 EN 13003-1:1999 BSI 09-1999 5 Bibliography EN 13003-2, Para-aramid fibre filament yarns Methods of test and general specifications. prEN 12562, Textiles Para-aramid multifilament yarns Methods of test. EN ISO 1889, Rei
34、nforcement yarns Determination of the linear density (ISO 1889:1997). EN ISO 1890, Reinforcement yarns Determination of twist (ISO 1890:1997). EN ISO 3344, Reinforcement yarns Determination of moisture content (ISO 3344:1997). EN ISO 2062, Textiles Yarns from packages Determination of single-end bre
35、aking force and elongation at break (ISO 2062:1993). EN ISO 10548, Carbon fibre Determination of size content (ISO 10548:1994). prEN ISO 10618, Carbon fibre Determination of tensile properties of resin-impregnated yarns (ISO/DIS 10618:1994). ISO 10119, Carbon fibre Determination of density.blankBS E
36、N 13003-1:1999 BSI 389 Chiswick High Road London W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
37、| | | | | BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or re
38、vision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform
39、 the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of stand
40、ards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been p
41、ublished as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also availab
42、le which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and ot
43、her benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and
44、 Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of nece
45、ssary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.
