1、BS EN 13230-1:2016Railway applications Track Concrete sleepers and bearersPart 1: General requirementsBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 13230-1:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13230-1:2016
2、.It supersedes BS EN 13230-1:2009 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee RAE/2, Railway Applications - Track.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to i
3、nclude all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2016. Published by BSI StandardsLimited 2016ISBN 978 0 580 84749 3ICS 91.100.30; 93.100Compliance with a British Standard cannot confer immunity fromlegal obligations
4、.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 May 2016.Amendments issued since publicationDate Text affectedBS EN 13230-1:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13230-1 May 2016 ICS 91.100.30; 93.100 Supersedes EN 13230
5、-1:2009English Version Railway applications - Track - Concrete sleepers and bearers - Part 1: General requirements Applications ferroviaires - Voie - Traverses et supports en bton - Partie 1 : Prescriptions gnrales Bahnanwendungen - Oberbau - Gleis- und Weichenschwellen aus Beton - Teil 1: Allgemein
6、e Anforderungen This European Standard was approved by CEN on 4 March 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and biblio
7、graphical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsi
8、bility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republ
9、ic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALIS
10、ATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13230-1:2016 EBS EN 13230-1:2016EN 13230-1:2016 (E) 2 Contents Page European
11、 foreword . 5 Introduction 6 1 Scope 7 2 Normative references 7 3 Terms and definitions . 8 4 Common characteristics 10 4.1 General . 10 4.2 Loading. 10 4.2.1 Loads . 10 4.2.2 Load distribution 10 4.3 Characteristic bending moments . 11 4.4 Data to be supplied 11 4.4.1 General . 11 4.4.2 Data to be
12、supplied by the purchaser . 11 4.4.3 Data to be provided by the supplier 12 5 Materials 12 5.1 General requirements 12 5.2 Cement . 13 5.3 Aggregates 13 5.4 Mixing water 14 5.5 Admixtures . 14 5.6 Concrete . 14 5.6.1 Material requirements . 14 5.6.2 Information to be provided by the supplier . 14 5.
13、6.3 Changes for the material and processes 15 5.7 Steel . 15 5.7.1 Prestressing tendons 15 5.7.2 Reinforcing steel . 15 5.7.3 Steel connecting bar 15 5.8 Embedded components 15 6 General requirements 15 6.1 Design . 15 6.1.1 Geometrical design 15 6.1.2 Concrete cover . 18 6.1.3 Prestressing system d
14、esign 18 6.1.4 Reinforcing steel design 18 6.2 Manufacturing process . 18 6.2.1 General requirements 18 6.2.2 Natural curing 19 6.2.3 Accelerated curing . 19 6.3 Surface finish . 21 6.4 Marking 21 7 Product testing 21 BS EN 13230-1:2016EN 13230-1:2016 (E) 3 7.1 General . 21 7.2 Mechanical parameters
15、 22 7.3 Tests on product . 22 7.4 Tests on concrete 22 7.5 Tests in combination with the fastening system . 23 7.6 Additional tests . 23 8 Quality control . 23 8.1 General . 23 8.2 Quality control during design approval tests . 24 8.3 Quality control during manufacturing 24 Annex A (informative) Tes
16、t method to determine the Taber Wear index for a fine aggregate 25 A.1 General . 25 A.2 Apparatus 25 A.3 Preparation of Mortar Tiles 25 A.3.1 Sampling 25 A.3.2 Mortar Tile preparation . 25 A.3.3 Mortar Tile curing 26 A.3.4 Grinding of Mortar Tiles . 26 A.4 Test procedure 26 A.5 Calculation of Taber
17、Wear Index. 26 Annex B (informative) Test method for freezethaw resistance . 27 Annex C (informative) Test method for measuring the water absorption of concrete at atmospheric pressure . 28 C.1 Introduction 28 C.2 Samples 28 C.3 Sequence of test . 28 C.4 Results 28 C.5 Requirements . 28 Annex D (inf
18、ormative) Definition and recommendation for measurement of rail seat inclination and twist between rail seats 29 Annex E (informative) Surface finish 30 E.1 General . 30 E.2 General information for surface finish . 30 E.3 Surface finish of the rail seat 30 E.4 Surface finish of all other surfaces .
19、31 E.5 Detailed procedure for remedial work . 31 Annex F (informative) Quality control during manufacturing Routine tests and frequency of testing 32 F.1 General . 32 F.2 Data of the sleeper to be checked . 32 BS EN 13230-1:2016EN 13230-1:2016 (E) 4 F.3 Examples for frequency of testing 34 Annex ZA
20、(informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2008/57/EC 35 Bibliography . 37 BS EN 13230-1:2016EN 13230-1:2016 (E) 5 European foreword This document (EN 13230-1:2016) has been prepared by Technical Committee CEN/TC 256 “Railway applications
21、”, the secretariat of which is held by DIN. This document supersedes EN 13230-1:2009. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2016, and conflicting national standards shall be wit
22、hdrawn at the latest by November 2016. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive 2008/57/EC. For relationship with EU Directive 2008/57/EC, see informative Annex
23、 ZA, which is an integral part of this document. This European Standard is one of the EN 13230 series “Railway applications Track Concrete sleepers and bearers”, which consist of the following parts: Part 1: General requirements; Part 2: Prestressed monoblock sleepers; Part 3: Twin-block reinforced
24、sleepers; Part 4: Prestressed bearers for switches and crossings; Part 5: Special elements; Part 6: Design. This European Standard is used as the technical basis for transaction between corresponding parties (purchaser supplier). Annexes A to F are informative; they can be used as normative requirem
25、ents by completion of a contract, if agreed by the contracting parties. The Annex E of EN 13230-1:2009 is deleted and is shifted into EN 13230-6. There is a change in the wording of the documents of EN 13230 (series) “design bending moment” is replaced by “characteristic bending moment” and “test be
26、nding moment”. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedon
27、ia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13230-1:2016EN 13230-1:2016 (E) 6 Introduction This part of the EN
28、 13230 series covers the general requirements for concrete sleepers and bearers and is used in conjunction with the following parts: Part 2: Prestressed monoblock sleepers; Part 3: Twin-block reinforced sleepers; Part 4: Prestressed bearers for switches and crossings; Part 5: Special elements; Part
29、6: Design. Concrete sleepers and bearers are safety critical components for railway applications. They are not covered by any other standards. As safety critical components, an agreement is needed between purchaser and supplier to operate a factory Quality System. This position about safety critical
30、 relevance has always been highlighted by decisions from CEN/TC 256/SC 1 “Railway applications / Infrastructure” and Annex ZA provides detailed information. BS EN 13230-1:2016EN 13230-1:2016 (E) 7 1 Scope This part of the EN 13230 series defines technical criteria and control procedures which need t
31、o be satisfied by the constituent materials and the finished concrete sleepers and bearers, i.e.: precast concrete sleepers, twin-block reinforced sleepers, bearers for switches and crossings, and special elements for railway tracks. The main requirement of concrete sleepers and bearers is the trans
32、mission of vertical, lateral and longitudinal loads from the rails to the ballast or other support. In use, they are also exposed to frost damage and to moisture, which can result in detrimental chemical reactions within the sleeper. In this standard mechanical tests are defined which provide assura
33、nce of the capability of sleepers or bearers to resist repetitive loading and provide sufficient durability. In addition, controls are placed on manufacturing processes and tests to ensure that the concrete will not suffer degradation in service through chemical reaction and frost damage. 2 Normativ
34、e references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) app
35、lies. EN 206, Concrete - Specification, performance, production and conformity EN 934-2, Admixtures for concrete, mortar and grout Part 2: Concrete admixtures Definitions, requirements, conformity, marking and labelling EN 1008, Mixing water for concrete - Specification for sampling, testing and ass
36、essing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete EN 10080, Steel for the reinforcement of concrete - Weldable reinforcing steel - General FprEN 10138 (all parts), Prestressing steels EN 12620, Aggregates for concrete EN
37、13146-5, Railway applications - Track - Test methods for fastening systems - Part 5: Determination of electrical resistance EN 13230-2:2016, Railway applications Track Concrete sleepers and bearers Part 2: Prestressed monobloc sleepers EN 13230-3:2016, Railway applications Track Concrete sleepers an
38、d bearers Part 3: Twin-block reinforced sleepers EN 13230-4:2016, Railway applications Track Concrete sleepers and bearers Part 4: Prestressed bearers for switches and crossings prEN 13230-6:2015, Railway applications Track Concrete sleepers and bearers Part 6: Design EN 13481-2, Railway application
39、s - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers BS EN 13230-1:2016EN 13230-1:2016 (E) 8 EN 13481-5, Railway applications - Track - Performance requirements for fastening systems - Part 5: Fastening systems for slab track with rail on the s
40、urface or rail embedded in a channel EN 13481-7, Railway applications - Track - Performance requirements for fastening systems - Part 7: Special fastening systems for switches and crossings and check rails 3 Terms and definitions For the purposes of this document, the following terms and definitions
41、 apply. 3.1 purchaser body responsible for purchasing the product on the users behalf 3.2 supplier body responsible for the use of the European Standard in response to the purchasers requirement, and for requirements which apply to the producer or manufacturer 3.3 sleeper transverse component of the
42、 track which controls the gauge and transmits loads from the rail to the ballast or other sleeper support 3.4 bearer for switches and crossings transverse component of switches and crossings which controls the relative geometry of two or more stretches of running rails and different pieces of specia
43、l track work, and transmits loads from the rails to the ballast or other bearer support 3.5 bending moment moment applied on the concrete sleeper or bearer which produces tension and compression in the element 3.6 positive bending moment moment which produces tension or reduces compression at the bo
44、ttom of the concrete sleeper or bearer 3.7 negative bending moment moment which produces tension or reduces compression at the top of the concrete sleeper or bearer 3.8 rail seat area on which a running rail rests 3.9 rail seat area rail seat and the immediate area around the fastening system BS EN
45、13230-1:2016EN 13230-1:2016 (E) 9 3.10 rail seat bending moment moment under the centre line of the rail 3.11 centre bending moment moment at the centre part of a monoblock sleeper 3.12 prestressed monoblock sleeper monoblock sleeper using pre-tensioned or post-tensioned tendons for prestressing the
46、 concrete 3.13 twin-block reinforced sleeper sleeper in which two reinforced concrete blocks are connected by a steel connecting bar 3.14 prestressed concrete bearer monoblock bearer using pre-tensioned or post-tensioned tendons for prestressing the concrete 3.15 test load load applied during testin
47、g 3.16 crack partial split in concrete due to an external bending moment 3.17 crack under loading crack measured during a test with an external bending moment applied 3.18 residual crack crack measured during a test after an external bending moment has been applied and has been removed 3.19 minimum
48、concrete cover minimum cover given by the nominal cover reduced by the tolerance Note 1 to entry: Construction tolerances do not apply to the anchorage system of prestressed sleepers, in which case only the ordinary construction tolerances indicated by the manufacturer are applied. 3.20 dynamic rail
49、 seat load Pkcharacteristic load on a rail seat of the sleeper for normal service dynamic loading 3.21 characteristic bending moment Mkbending moment from dynamic rail seat load PkBS EN 13230-1:2016EN 13230-1:2016 (E) 10 3.22 characteristic positive bending moment for rail seat section Mk,r,pospositive bending moment at rail seat from dynamic rail seat load Pk3.23 characteristic negative bending moment for rail seat section Mk,r,negnegative bending moment at rail seat from dynamic rail seat load Pk3.24 characteristic
