1、BS EN 14023:2010ICS 93.080.20NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDBitumen andbituminous binders Specificationframework for polymermodified bitumensThis British Standard was published under the authority of the Standards Policy and Strategy Committee o
2、n 31 May 2010 BSI 2010ISBN 978 0 580 64340 8Amendments/corrigenda issued since publicationDate CommentsBS EN 14023:2010National forewordThis British Standard is the UK implementation of EN 14023:2010. Itsupersedes BS EN 14023:2005 which is withdrawn.The UK participation in its preparation was entrus
3、ted by Technical Committee B/510, Road materials, to Subcommittee B/510/19, Bitumen and related products.A list of organizations represented on this committee can be obtained onrequest to its secretary.This Standard is a revision of BS EN 14023:2005 and incorporates theprinciple changes outlined bel
4、ow:further harmonization of the original standard; a subdivision of properties into three groups in the tables;In the tables, properties are subdivided into three groups as follows:1. The properties in Table 1 shall be specified for all polymer modifiedbitumens. They are associated with regulatory o
5、r HSE requirements.2. The properties in Table 2 are required to meet specific regionalconditions. They are associated with regulatory or other regionalrequirements. 3. The properties in Table 3 are additional properties, which are non-mandated, but have been found useful in some countries to describ
6、epolymer modified bitumens.Guidance for users on the implementation of BS EN 14023:2010 forpolymer modified bitumens for use in the construction and maintenanceof roads and airfields in the UK is included in National Annex NA(informative).This publication does not purport to include all the necessar
7、y provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14023 April 2010 ICS 93.080.20 Supersedes EN 14023:2005English Version Bitumen and bitumin
8、ous binders - Specification framework for polymer modified bitumens Bitumes et liants bitumineux - Cadre de spcifications des bitumes modifis par des polymres Bitumen und bitumenhaltige Bindemittel - Rahmenwerk fr die Spezifikation von polymermodifizierten Bitumen This European Standard was approved
9、 by CEN on 6 March 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national stand
10、ards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified t
11、o the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg,
12、 Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of
13、exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14023:2010: EBS EN 14023:2010EN 14023:2010 (E) 2 Contents Page Foreword . 3Introduction 41 Scope . 52 Normative references . 53 Terms and definitions . 64 Sampling 65 Requirements and test methods . 66
14、 Evaluation of conformity 13Annex A (informative) Example of selected classes for a PMB 45/80-60 16Annex B (informative) Other properties 17Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive . 18Bibliography . 27BS EN 14023:20
15、10EN 14023:2010 (E) 3 Foreword This document (EN 14023:2010) has been prepared by Technical Committee CEN/TC 336 “Bituminous binders”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by
16、endorsement, at the latest by October 2010, and conflicting national standards shall be withdrawn at the latest by October 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for
17、identifying any or all such patent rights. This document supersedes EN 14023:2005. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directi
18、ve(s), see informative Annex ZA, which is an integral part of this document. This European Standard is part of a family of European Standards for bitumen as follows: NOTE Industrial applications are not covered by mandate M/124. According to the CEN/CENELEC Internal Regulations, the national standar
19、ds organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Pol
20、and, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Bituminous binders Paving grade bitumens EN 12591 Oxidized bitumens (industrial applications) EN 13304 Hard Gradeindustrialbitumens (industrial applications)EN 13924 Hard paving grade bitumens Polymer modi
21、fied bitumens EN 14023 EN 13305Cut-back “consistency at elevated service temperature“; “cohesion“; “durability“ of consistency; “brittleness at low service temperature“; “strain recovery“. The cohesion property has been included as a means of discriminating between polymer modified bitumens and othe
22、r bituminous binders. The other essential requirements, “adhesion“ and “setting ability“ are indicated by tests carried out on the finished asphalt mixtures. The introduction of classes of convenience in Table 1, Table 2 and Table 3 enables the selection of the most suitable specification for the bi
23、tumen taking account of local conditions of climate and use. The nomenclature of polymer modified bitumens comprises the penetration range and the minimum softening point (see example in Annex A). 2 Normative references The following referenced documents are indispensable for the application of this
24、 document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 58, Bitumen and bituminous binders Sampling bituminous binders EN 1426, Bitumen and bituminous binders Determination of needle
25、 penetration EN 1427, Bitumen and bituminous binders Determination of the softening point Ring and Ball method EN 12593, Bitumen and bituminous binders Determination of the Fraass breaking point EN 12594, Bitumen and bituminous binders Preparation of test samples EN 12595, Bitumen and bituminous bin
26、ders Determination of kinematic viscosity EN 12596, Bitumen and bituminous binders Determination of dynamic viscosity by vacuum capillary EN 12597:2000, Bitumen and bituminous binders Terminology EN 12607-1, Bitumen and bituminous binders Determination of the resistance to hardening under the influe
27、nce of heat and air Part 1: RTFOT method EN 13302, Bitumen and bituminous binders Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus EN 13398, Bitumen and bituminous binders Determination of the elastic recovery of modified bitumen BS EN 14023:2010EN 14023:201
28、0 (E) 6 EN 13399, Bitumen and bituminous binders Determination of storage stability of modified bitumen EN 13587, Bitumen and bituminous binders Determination of the tensile properties of bituminous binders by the tensile test method EN 13588, Bitumen and bituminous binders Determination of cohesion
29、 of bituminous binders with pendulum test EN 13589, Bitumen and bituminous binders Determination of the tensile properties of modified bitumen by the force ductility method EN 13702-1, Bitumen and bituminous binders Determination of dynamic viscosity of modified bitumen Part 1: Cone and plate method
30、 EN 13703, Bitumen and bituminous binders Determination of deformation energy EN 15326, Bitumen and bituminous binders Measurement of density and specific gravity Capilliary-stoppered pyknometer method (including EN 15326:2007/A1:2009) EN ISO 2592, Determination of flash and fire points Cleveland op
31、en cup method (ISO 2592:2000) EN ISO 4259, Petroleum products Determination and application of precision data in relation to methods of test (ISO 4259:2006) EN ISO 9001:2008, Quality management systems Requirements (ISO 9001:2008) 3 Terms and definitions For the purposes of this document, the terms
32、and definitions given in EN 12597:2000 apply. The following abbreviation term is used in the specification tables of this document (see Table 1, Table 2 and Table 3): TBR for “To Be Reported“: this class shall mean that the manufacturer is invited, but not required, to provide information, regarding
33、 performance characteristics, with the product. NOTE The reported values (TBR) are intended to be used for future development of specifications. NR for “No Requirement“ may be used when there are no regulations or other regional requirements for the property in the territory of intended use. 4 Sampl
34、ing Samples of bulk products shall be taken as described in EN 58. Test samples shall be taken from the laboratory samples, and prepared for testing, as described in EN 12594. 5 Requirements and test methods 5.1 General European product standards cover a large variety of road materials for different
35、 applications, to accommodate local traffic loads and climatic conditions. This European Standard therefore also covers a large range of bitumens to facilitate the production and application of the designed paving. This European Standard is a framework of specifications and classes for properties of
36、 polymer modified bitumens which are chosen from Table 1, Table 2 and Table 3. BS EN 14023:2010EN 14023:2010 (E) 7 There is a subdivision of properties into three groups in the tables. The properties in Table 1 shall be specified for all polymer modified bitumens. They are associated with regulatory
37、 or HSE requirements. The properties in Table 2 are required to meet specific regional conditions. They are associated with regulatory or other regional requirements. The properties in Table 3 are additional properties, which are non-mandated, but have been found useful in some countries to describe
38、 polymer modified bitumens. 5.2 Properties and related test methods 5.2.1 General The properties of, and the related test methods for polymer modified bitumens shall be selected from the classes given in Table 1 and Table 2. When tested by the methods given in a table, the various grades shall confo
39、rm to the limits specified in that table. In Table 3 further properties that have been considered useful for specifications are described. NOTE 1 Each country will then have a particular selection of specifications, which, if regulated, are covered in Tables 1 and 2 and which, if commonly used by in
40、dustry, are covered in Table 3. It is useful for each country to publish in a national guidance document for each application, their requirements for polymer modified bitumens from Table 1, Table 2 and Table 3. The appropriate class for each technical requirement or application is selected in turn a
41、nd the selection of classes should be made from past experience of successful use, on a regional basis, in order to avoid unworkable combinations. NOTE 2 In order to assist in using the tables, an example has been provided in Annex A. 5.2.2 Consistency at intermediate service temperatures Consistenc
42、y at intermediate service temperature for polymer modified bitumens shall comply with the requirements for penetration at 25 C in Table 1. The grades are designated by the nominal penetration range at 25 C. 5.2.3 Consistency at elevated service temperatures Consistency at elevated service temperatur
43、e for polymer modified bitumens shall comply with the requirements for softening point as indicated in Table 1. Polymer modified bitumens are supplied for a variety of end uses in various climatic conditions; consequently the specifications include a wide range of softening point values. NOTE The va
44、rious softening point limits are included so as not to prevent some traditional methods used to evaluate the suitability of modified bitumens in the different European climatic conditions (for more information refer to national guidance documents). As the grading system is based on the consistency a
45、t intermediate and elevated service temperatures, values shall be given for these characteristics. 5.2.4 Brittleness at low service temperature Brittleness at low service temperature may be required to meet specific regional conditions. Where required, polymer modified bitumens shall conform to the
46、requirements for Fraass breaking point in Table 2. For some highly modified polymer modified bitumens, Fraass breaking point is not a suitable low temperature method and, in that case, low temperature elastic recovery at 10 C shall be used. 5.2.5 Cohesion The property of cohesion is included as a me
47、ans of differentiating polymer modified bitumens from paving grade bitumens. Three different test methods are included in Table 1: force ductility, tensile test and Vialit pendulum. These reflect the different characteristics that can occur with polymer modified bitumens and are not considered to be
48、 equivalent. It is intended that the most appropriate cohesion test method shall be used in each case, at the discretion of the supplier. The manufacturer shall state the test method used. BS EN 14023:2010EN 14023:2010 (E) 8 One cohesion method shall be chosen based on end application. Vialit cohesi
49、on (EN 13588) shall only be used for surface dressing binders. 5.2.6 Durability Resistance to hardening Resistance to hardening shall be tested after conditioning in accordance with the Rolling Thin Film Oven Test (RTFOT) (see EN 12607-1). The main test is the RTFOT at 163 C. For some highly viscous polymer modified bitumens where the viscosity is too high to provide a moving film it is not possible to carry out the RTFOT at the reference temperature of 163 C. In such cases the proced
