1、Dynamic modulesPart 3-1: Performance specification templates Dynamic channel equalizersBS EN 62343-3-1:2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis British Standard is the UK implementation of EN 62343-3-1:2016. It isidentical to IEC 6234
2、3-3-1:2016. It supersedes BS EN 62343-3-1:2010 whichis withdrawn.The UK participation in its preparation was entrusted by TechnicalCommittee GEL/86, Fibre optics, to Subcommittee GEL/86/3, Fibre optic systems and active devices.A list of organizations represented on this committee can be obtained on
3、request to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 90819 4ICS 33.180.20Compliance with a Briti
4、sh Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 August 2016.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62343-3-1:2016EUROPEAN STANDARD NORME
5、 EUROPENNE EUROPISCHE NORM EN 62343-3-1 July 2016 ICS 33.180.20 Supersedes EN 62343-3-1:2010 English Version Dynamic modules - Part 3-1: Performance specification templates - Dynamic channel equalizers (IEC 62343-3-1:2016) Modules dynamiques - Partie 3-1: Modles de spcification de performance - Egal
6、iseurs de canaux de transmission dynamiques (IEC 62343-3-1:2016) Dynamische Module - Teil 3-1: Vorlagen fr Leistungsspezifikationen - Dynamische Kanal-Equalizer (IEC 62343-3-1:2016) This European Standard was approved by CENELEC on 2016-05-26. CENELEC members are bound to comply with the CEN/CENELEC
7、 Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or t
8、o any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as th
9、e official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxemb
10、ourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN
11、-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62343-3-1:2016 E BS EN 62343-3-1:2016EN 62343-3-1:2016 2 European foreword The text of document 86C/1370/FDIS, future
12、 edition 2 of IEC 62343-3-1, prepared by SC 86C “Fibre optic systems and active devices” of IEC/TC 86 “Fibre optics” was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62343-3-1:2016. The following dates are fixed: latest date by which the document has to be implemented at
13、national level by publication of an identical national standard or by endorsement (dop) 2017-02-26 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-05-26 This document supersedes EN 62343-3-1:2010. It constitutes a technical revision and inclu
14、des the following significant technical change with respect to the previous edition: modification of terms and definitions and references. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held respon
15、sible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62343-3-1:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard in
16、dicated : IEC 61300 (series) NOTE Harmonized in EN 61300 (series). IEC 61753-1 NOTE Harmonized as EN 61753-1. BS EN 62343-3-1:2016EN 62343-3-1:2016 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in who
17、le or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publicati
18、on has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 61300-2-14 - Fibre optic intercon
19、necting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - High optical power EN 61300-2-14 - IEC 61300-3-2 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2: Examination and measurements - Polariz
20、ation dependent loss in a single-mode fibre optic device EN 61300-3-2 - IEC 61300-3-6 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements - Return loss EN 61300-3-6 - IEC 61300-3-29 - Fibre optic interconnecti
21、ng devices and passive components - Basic test and measurement procedures - Part 3-29: Examinations and measurements - Spectral transfer characteristics of DWDM devices EN 61300-3-29 - IEC 61300-3-32 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures
22、 - Part 3-32: Examinations and measurements - Polarization mode dispersion measurement for passive optical components EN 61300-3-32 - IEC 61300-3-38 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-38:Examinations and measurements - Group
23、delay, chromatic dispersion and phase ripple EN 61300-3-38 - IEC 61753-021-2 - Fibre optic interconnecting devices and passive components performance standard - Part 021-2: Grade C/3 single-mode fibre optic connectors for category C - Controlled environment EN 61753-021-2 - IEC 62343 - Dynamic modul
24、es - General and guidance EN 62343 - ITU-T Recommendation G.694.1 - Spectral grids for WDM applications: DWDM frequency grid - - BS EN 62343-3-1:2016 2 IEC 62343-3-1:2016 IEC 2016 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references. 6 3 Terms and definitions 7 4 Test report. 7 5
25、Reference components 7 6 Performance requirements . 7 6.1 Dimensions . 7 6.2 Sample size 7 6.3 Test details and requirements 7 Bibliography . 10 Table 1 Tests and requirements . 8 BS EN 62343-3-1:2016IEC 62343-3-1:2016 IEC 2016 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ DYNAMIC MODULES Part 3-1:
26、Performance specification templates Dynamic channel equalizers FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
27、co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referre
28、d to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in th
29、is preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an internation
30、al consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable e
31、fforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Public
32、ations transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. I
33、ndependent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7)
34、No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for cost
35、s (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct applica
36、tion of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62343-3-1 has been prepared by subcomm
37、ittee 86C: Fibre optic systems and active devices, of IEC technical committee 86: Fibre optics. This second edition cancels and replaces the first edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical change with respect t
38、o the previous edition: modification of terms and definitions and references. BS EN 62343-3-1:2016 4 IEC 62343-3-1:2016 IEC 2016 The text of this standard is based on the following documents: FDIS Report on voting 86C/1370/FDIS 86C/1372/RVD Full information on the voting for the approval of this sta
39、ndard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 62343 series, published under the general title Dynamic modules, can be found on the IEC website. The committee
40、 has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, o
41、r amended. A bilingual version of this publication may be issued at a later date. BS EN 62343-3-1:2016IEC 62343-3-1:2016 IEC 2016 5 INTRODUCTION A dynamic channel equalizer (DCE) is used to compensate and equalize the variations in channel power spectrum as the optical channels propagate through DWD
42、M networks. A typical DCE module is an electrically controlled two port device, which controls the time varying power levels of multichannel input signals such that, at the output channel, powers are nominally equalized. BS EN 62343-3-1:2016 6 IEC 62343-3-1:2016 IEC 2016 DYNAMIC MODULES Part 3-1: Pe
43、rformance specification templates Dynamic channel equalizers 1 Scope This part of IEC 62343 provides a performance specification template for the dynamic channel equalizer (DCE). The object of this performance specification template is to provide a framework for the preparation of detail specificati
44、ons on the product or performance of dynamic channel equalizers. Additional specification parameters may be included for product specifications or performance specifications. However, specification parameters specified in this standard should not be removed from the product specifications or perform
45、ance specifications. Technical information regarding dynamic channel equalizers and their applications in DWDM systems is described in IEC TR 62343-6-1. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its appl
46、ication. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61300-2-14, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-14: Tests H
47、igh optical power IEC 61300-3-2, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-2: Examinations and measurements Polarization dependent loss in a single-mode fibre optic device IEC 61300-3-6, Fibre optic interconnecting devices and passive com
48、ponents Basic test and measurement procedures Part 3-6: Examinations and measurements Return loss IEC 61300-3-29, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-29: Examinations and measurements Spectral transfer characteristics of DWDM device
49、s IEC 61300-3-32, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-32: Examinations and measurements Polarization mode dispersion measurement for passive optical components IEC 61300-3-38, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-38: Examinations and measurements Group delay, chromatic dispersion and phase ripple IEC 61753-0
