1、GX16t-5 capped tubular led lamp Safety specifications BS EN 62931:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62931 June 2017 ICS 29.140.10 English Version GX16t-5 capped tubular led lamp - Safety specifica
2、tions (IEC 62931:2017) Lampe led tubulaire munie dun culot GX16t-5 - Spcifications de scurit (IEC 62931:2017) Zweiseitig gesockelte LED-Lampen mit Passungssystem GX16t-5 - Sicherheitsanforderungen (IEC 62931:2017) This European Standard was approved by CENELEC on 2017-06-01. CENELEC members are boun
3、d to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CE
4、N-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management
5、Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland,
6、Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches
7、Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62931:2017 E National forewordThis British Standard is the UK implementation
8、of EN 62931:2017. It is identical to IEC 62931:2017.The UK participation in its preparation was entrusted to Technical Committee CPL/34/1, Electric lamps.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all
9、 the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 88053 7ICS 29.140.10Compliance with a British Standard cannot confer immunity from legal obligations.This British S
10、tandard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62931:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62931 June 2017 ICS 29.140.10 English Version
11、GX16t-5 capped tubular led lamp - Safety specifications (IEC 62931:2017) Lampe led tubulaire munie dun culot GX16t-5 - Spcifications de scurit (IEC 62931:2017) Zweiseitig gesockelte LED-Lampen mit Passungssystem GX16t-5 - Sicherheitsanforderungen (IEC 62931:2017) This European Standard was approved
12、by CENELEC on 2017-06-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
13、standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own la
14、nguage and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, Fr
15、ance, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Euro
16、pen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62931:2017 E BS EN 62931:20
17、17EN 62931:2017 2 European foreword The text of document 34A/1957/FDIS, future edition 1 of IEC 62931, prepared by SC 34A “Lamps“, of IEC/TC 34 “Lamps and related equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62931:2017. The following dates are fixed: latest
18、 date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-03-01 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-06-01 Attention is drawn to the possibilit
19、y that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association.
20、Endorsement notice The text of the International Standard IEC 62931:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60081 NOTE Harmonized as EN 60081. IEC 60
21、529:1989 + A1:1999 + A2:2013 NOTE Harmonized as EN 60529:1991 (not modified) + A1:2000 (not modified) + A2:2013 (not modified). IEC 60921 NOTE Harmonized as EN 60921. IEC 61195 NOTE Harmonized as EN 61195. IEC 61347-2-13 NOTE Harmonized as EN 61347-2-13. IEC 62471 NOTE Harmonized as EN 62471. BS EN
22、62931:2017EN 62931:2017 2 European foreword The text of document 34A/1957/FDIS, future edition 1 of IEC 62931, prepared by SC 34A “Lamps“, of IEC/TC 34 “Lamps and related equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62931:2017. The following dates are fixed
23、: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-03-01 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-06-01 Attention is drawn to the po
24、ssibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Assoc
25、iation. Endorsement notice The text of the International Standard IEC 62931:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60081 NOTE Harmonized as EN 60081
26、. IEC 60529:1989 + A1:1999 + A2:2013 NOTE Harmonized as EN 60529:1991 (not modified) + A1:2000 (not modified) + A2:2013 (not modified). IEC 60921 NOTE Harmonized as EN 60921. IEC 61195 NOTE Harmonized as EN 61195. IEC 61347-2-13 NOTE Harmonized as EN 61347-2-13. IEC 62471 NOTE Harmonized as EN 62471
27、. EN 62931:2017 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the
28、 edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the l
29、atest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60061-1 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps EN 60061-1 - IEC 60061-2 - Lamp caps and ho
30、lders together with gauges for the control of interchangeability and safety - Part 2: Lampholders EN 60061-2 - IEC 60061-3 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges EN 60061-3 - IEC 60061-4 - Lamp caps and holders together with gau
31、ges for the control of interchangeability and safety - Part 4: Guidelines and general information EN 60061-4 - IEC 60360 - Standard method of measurement of lamp cap temperature rise EN 60360 - IEC 60400 2008 Lampholders for tubular fluorescent lamps and starterholders EN 60400 2008 + A1 2011 + A1 2
32、011 + A2 2014 + A2 2014 IEC 60598-1 (mod) 2014 Luminaires - Part 1: General requirements and tests EN 60598-1 2015 IEC 60695-2-10 2000 Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure EN 60695-2-10 2001 1)1) EN 60695-2-10:2001 is su
33、perseded by EN 60695-2-10:2013, which is based on IEC 60695-2-10:2013. BS EN 62931:2017EN 62931:2017 4 Publication Year Title EN/HD Year IEC 60838-2-3 - Miscellaneous lampholders - Part 2-3: Particular requirements - Lampholders for double-capped linear LED lamps EN 60838-2-3 - IEC 60695-2-11 2000 F
34、ire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products EN 60695-2-11 2001 2)IEC 61347-1 2015 Lamp controlgear - Part 1: General and safety requirement EN 61347-1 2015 IEC 62031 - LED modules for general lighting - Safety specificatio
35、ns EN 62031 - IEC 62504 - General lighting - Light emitting diode (LED) products and related equipment - Terms and definitions EN 62504 - IEC/TR 62778 2014 Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires - - ISO 4046-4 2016 Paper, board, pulps and rel
36、ated terms - Vocabulary - Part 4: Paper and board grades and converted products - - 2) EN 60695-2-11:2001 is superseded by EN 60695-2-11:2014, which is based on IEC 60695-2-11:2014. 2 IEC 62931:2017 IEC 2017 CONTENTS FOREWORD . 4 1 Scope 6 2 Normative references 6 3 Terms and definitions 7 4 General
37、 requirements and general test requirements . 8 5 Marking . 8 5.1 Marking on the lamp . 8 5.2 Marking on the packing or in instructions 9 5.3 Durability and legibility of marking . 9 6 Interchangeability 10 6.1 Dimensional requirements of caps 10 6.2 Mass . 10 6.3 Dimensions . 10 6.3.1 General . 10
38、6.3.2 Dimensions at 25 C (non-operating) . 10 6.3.3 Dimension A at maximum ambient temperature (operating) . 10 6.3.4 Dimension A at minimum ambient temperature (non-operating) . 11 6.4 Temperature . 11 6.5 Lamp bowing (sag) . 11 6.6 Pin connection 12 7 Protection against accidental contact with liv
39、e parts 12 8 Insulation resistance and electric strength after humidity treatment . 14 8.1 General . 14 8.2 Insulation resistance . 14 8.3 Electric strength 14 9 Mechanical requirements for caps . 14 9.1 General . 14 9.2 Torque test on unused lamps 14 9.3 Torque test after heat treatment 15 9.4 Live
40、 part accessibility after mechanical tests . 15 10 Cap temperature rise . 15 11 Resistance to heat . 15 12 Resistance to flame and ignition 16 13 Resistance to heat of insulating material of cap . 17 14 Fault conditions . 17 14.1 General . 17 14.2 Testing under extreme electrical conditions 17 14.3
41、Short-circuit across capacitors 18 14.4 Fault conditions across electronic components . 18 14.5 Compliance . 18 15 Creepage distances and clearances 18 16 Ingress protection 19 16.1 Aim of the test 19 16.2 Thermal endurance . 19 16.3 IP testing 19 BS EN 62931:2017EN 62931:2017 4 Publication Year Tit
42、le EN/HD Year IEC 60838-2-3 - Miscellaneous lampholders - Part 2-3: Particular requirements - Lampholders for double-capped linear LED lamps EN 60838-2-3 - IEC 60695-2-11 2000 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products E
43、N 60695-2-11 2001 2)IEC 61347-1 2015 Lamp controlgear - Part 1: General and safety requirement EN 61347-1 2015 IEC 62031 - LED modules for general lighting - Safety specifications EN 62031 - IEC 62504 - General lighting - Light emitting diode (LED) products and related equipment - Terms and definiti
44、ons EN 62504 - IEC/TR 62778 2014 Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires - - ISO 4046-4 2016 Paper, board, pulps and related terms - Vocabulary - Part 4: Paper and board grades and converted products - - 2) EN 60695-2-11:2001 is superseded by
45、EN 60695-2-11:2014, which is based on IEC 60695-2-11:2014. 2 IEC 62931:2017 IEC 2017 CONTENTS FOREWORD . 4 1 Scope 6 2 Normative references 6 3 Terms and definitions 7 4 General requirements and general test requirements . 8 5 Marking . 8 5.1 Marking on the lamp . 8 5.2 Marking on the packing or in
46、instructions 9 5.3 Durability and legibility of marking . 9 6 Interchangeability 10 6.1 Dimensional requirements of caps 10 6.2 Mass . 10 6.3 Dimensions . 10 6.3.1 General . 10 6.3.2 Dimensions at 25 C (non-operating) . 10 6.3.3 Dimension A at maximum ambient temperature (operating) . 10 6.3.4 Dimen
47、sion A at minimum ambient temperature (non-operating) . 11 6.4 Temperature . 11 6.5 Lamp bowing (sag) . 11 6.6 Pin connection 12 7 Protection against accidental contact with live parts 12 8 Insulation resistance and electric strength after humidity treatment . 14 8.1 General . 14 8.2 Insulation resi
48、stance . 14 8.3 Electric strength 14 9 Mechanical requirements for caps . 14 9.1 General . 14 9.2 Torque test on unused lamps 14 9.3 Torque test after heat treatment 15 9.4 Live part accessibility after mechanical tests . 15 10 Cap temperature rise . 15 11 Resistance to heat . 15 12 Resistance to fl
49、ame and ignition 16 13 Resistance to heat of insulating material of cap . 17 14 Fault conditions . 17 14.1 General . 17 14.2 Testing under extreme electrical conditions 17 14.3 Short-circuit across capacitors 18 14.4 Fault conditions across electronic components . 18 14.5 Compliance . 18 15 Creepage distances and clearances 18 16 Ingress protection 19 16.1 Aim of the test 19 16.2 Thermal endurance . 19 16.3 IP testing 19 BS EN 62931:2017IEC 62931:2017 IEC 2017 3 17 Photobiological safety 19 17.1 UV radiation
