1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 11148-5:2011Hand-held non-electric power tools Safety requirementsPart 5: Rotary percussive drills (ISO 11148-5:2011)Copyright European Committee for Standardization Pr
2、ovided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11148-5:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 11148-5:2011. It supersedes BS EN 792-5:2000+A1:2008, which is withd
3、rawn.The UK participation in its preparation was entrusted to Technical Committee MCE/8/-/2, Hand-held, non-electric power tools - Safety.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary p
4、rovisions of a contract. Users are responsible for its correct application. BSI 2011 ISBN 978 0 580 64136 7 ICS 25.140.10 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Comm
5、ittee on 31 January 2012Amendments issued since publicationDate Text affectedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN
6、ISO 11148-5 December 2011 ICS 25.140.10 Supersedes EN 792-5:2000+A1:2008English Version Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011) Machines portatives moteur non lectrique - Exigences de scurit - Partie 5: Perceuses percussion rotat
7、ives (ISO 11148-5:2011) Handgehaltene nicht elektrisch betriebene Maschinen - Sicherheitsanforderungen - Teil 5: Schlagbohrmaschinen (ISO 11148-5:2011) This European Standard was approved by CEN on 12 November 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stip
8、ulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European
9、Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the
10、 national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Sw
11、itzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. N
12、o. EN ISO 11148-5:2011: ECopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11148-5:2011 EN ISO 11148-5:2011 (E) 3 Foreword This document (EN ISO 11148-5:2011) has been pr
13、epared by Technical Committee ISO/TC 118 “Compressors and pneumatic tools, machines and equipment“ in collaboration with Technical Committee CEN/TC 255 “Hand-held, non-electric power tools - Safety” the secretariat of which is held by SIS. This European Standard shall be given the status of a nation
14、al standard, either by publication of an identical text or by endorsement, at the latest by June 2012, and conflicting national standards shall be withdrawn at the latest by June 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent right
15、s. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 792-5:2000+A1:2008. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential r
16、equirements of EU Directive. For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Aus
17、tria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
18、 Endorsement notice The text of ISO 11148-5:2011 has been approved by CEN as a EN ISO 11148-5:2011 without any modification. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN
19、 ISO 11148-5:2011EN ISO 11148-5:2011 (E) 4 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Associa
20、tion to provide a means of conforming to Essential Requirements of the New Approach Directive 2006/42/EC on machinery. Once this standard is cited in the Official Journal of the European Union under that Directive and has been implemented as a national standard in at least one Member State, complian
21、ce with the clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the corresponding Essential Requirements of that Directive except ER 1.5.7 and associated EFTA regulations. WARNING Other requirements and other EU Directives may be applic
22、able to the product(s) falling within the scope of this standard. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11148-5:2011ISO 11148-5:2011(E) ISO 2011 All rights re
23、served iiiContents Page Foreword iv Introduction . v 1 Scope 1 2 Normative references 1 3 Terms and definitions . 2 3.1 General terms and definitions 2 3.2 Terms and definitions related to rotary percussive power tools . 4 4 Safety requirements and/or protective measures 4 4.1 General . 4 4.2 Mechan
24、ical safety 4 4.3 Thermal safety . 5 4.4 Noise reduction . 5 4.5 Vibration . 6 4.6 Materials and substances processed, used or exhausted 6 4.7 Ergonomics 7 4.8 Controls 7 5 Verification . 8 5.1 General conditions for tests . 8 5.2 Noise . 8 5.3 Vibration . 8 5.4 Unintentional start . 8 5.5 Power too
25、l construction . 9 5.6 Structure of verification 9 6 Information for use 9 6.1 Marking, signs and written warnings 9 6.2 Instruction handbook 10 6.3 Operating instructions 15 6.4 Data . 16 6.5 Maintenance instructions . 17 Annex A (informative) List of significant hazards . 18 Annex B (informative)
26、Examples of rotary percussive drills covered by this part of ISO 11148 19 Annex C (normative) Symbols for labels and signs 20 Annex D (normative) Additional safety requirements related to internal combustion engine power tools 21 Bibliography 25 Copyright European Committee for Standardization Provi
27、ded by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11148-5:2011ISO 11148-5:2011(E) iv ISO 2011 All rights reservedForeword ISO (the International Organization for Standardization) is a worldwide federation of national standar
28、ds bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organi
29、zations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in
30、 the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 %
31、of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 11148-5 was prepared by Technical Committee ISO/TC 118, Comp
32、ressors and pneumatic tools, machines and equipment, Subcommittee SC 3, Pneumatic tools and machines. ISO 11148 consists of the following parts, under the general title Hand-held non-electric power tools Safety requirements: Part 1: Assembly power tools for non-threaded mechanical fasteners Part 2:
33、Cutting-off and crimping power tools Part 3: Drills and tappers Part 4: Non-rotary percussive power tools Part 5: Rotary percussive drills Part 6: Assembly power tools for threaded fasteners Part 7: Grinders Part 8: Sanders and polishers Part 9: Die grinders Part 10: Compression power tools Part 11:
34、 Nibblers and shears Part 12: Circular, oscillating and reciprocating saws A part 13, dealing with fastener driving tools, is under preparation. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without licens
35、e from IHS-,-,-BS EN ISO 11148-5:2011ISO 11148-5:2011(E) ISO 2011 All rights reserved vIntroduction This document is a type-C standard as stated in ISO 12100. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are defined in the Scope of this part of
36、 ISO 11148. When requirements of this type-C standard are different from those which are stated in type-A or -B standards, the requirements of this type-C standard take precedence over the requirements of other standards, for machines that have been designed and built according to the requirements o
37、f this type-C standard. ISO 11148 consists of a number of independent parts for individual types of hand-held non-electric power tools. Certain parts of ISO 11148 cover hand-held non-electric power tools driven by internal combustion engines powered by gaseous or liquid fuel. In these parts, the saf
38、ety aspects relating to internal combustion engines are found in a normative annex. The parts are type-C standards and refer to pertinent standards of type A and B where such standards are applicable. Copyright European Committee for Standardization Provided by IHS under license with CENNot for Resa
39、leNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11148-5:2011Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11148-5:2011INTERNATIONAL S
40、TANDARD ISO 11148-5:2011(E) ISO 2011 All rights reserved 1Hand-held non-electric power tools Safety requirements Part 5: Rotary percussive drills IMPORTANT The colours represented in the electronic file of this document can be neither viewed on screen nor printed as true representations. For the pur
41、poses of colour matching, see ISO 3864-4, which provides colorimetric and photometric properties together with, as a guideline, references from colour order systems. 1 Scope This part of ISO 11148 specifies safety requirements for hand-held non-electric power tools (hereinafter “rotary percussive dr
42、ills”) intended for making holes in hard materials, such as rock and concrete. The rotary percussive drills can be powered by compressed air, hydraulic fluid or internal combustion engines (ICEs) and are intended to be used by one operator and supported by the operators hand or hands, with or withou
43、t a suspension, e.g. a balancer. This part of ISO 11148 is applicable to: plug hole drills; rock drills; rotary hammers. NOTE 1 For examples of rotary percussive drills, see Annex B. This part of ISO 11148 is not applicable to special requirements and modifications of rotary percussive drills for th
44、e purpose of mounting them in a fixture. This part of ISO 11148 deals with all significant hazards, hazardous situations or hazardous events relevant to rotary percussive drills when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with t
45、he exception of the use of rotary percussive drills in potentially explosive atmospheres. NOTE 2 EN 13463-1 gives requirements for non-electrical equipment for potentially explosive atmospheres. 2 Normative references The following referenced documents are indispensable for the application of this d
46、ocument. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 3857-3, Compressors, pneumatic tools and machines Vocabulary Part 3: Pneumatic tools and machines ISO 5391, Pneumatic tools and
47、 machines Vocabulary Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11148-5:2011ISO 11148-5:2011(E) 2 ISO 2011 All rights reservedISO 9158, Road vehicles Nozzles spout
48、s for unleaded gasoline ISO 9159, Road vehicles Nozzles spouts for leaded gasoline and diesel fuel ISO 12100:2010, Safety of machinery General principles for design Risk assessment and risk reduction ISO 13732-1, Ergonomics of the thermal environment Methods for the assessment of human responses to contact with surfaces Part 1: Hot surfaces ISO 13732-3, Ergonomics of the thermal environment Methods for the assessment of human responses to contact with surfaces Part 3: Cold surfaces ISO 15744, Hand-held
