BS EN ISO 17230-2011 Leather Physical and mechanical tests Determination of water penetration pressure《皮革制品 物理和机械试验 渗水压力测定》.pdf
《BS EN ISO 17230-2011 Leather Physical and mechanical tests Determination of water penetration pressure《皮革制品 物理和机械试验 渗水压力测定》.pdf》由会员分享,可在线阅读,更多相关《BS EN ISO 17230-2011 Leather Physical and mechanical tests Determination of water penetration pressure《皮革制品 物理和机械试验 渗水压力测定》.pdf(14页珍藏版)》请在麦多课文档分享上搜索。
1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 17230:2011Leather Physical andmechanical tests Determination of waterpenetration pressure (ISO17230:2006)BS EN ISO 17230:2011 BRITISH STANDARDNational forewordThis Brit
2、ish Standard is the UK implementation of EN ISO17230:2011. It is identical to ISO 17230:2006. It supersedes BS EN14289:2003 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee TCI/69, Footwear, leather and coated fabrics.A list of organizations represented
3、on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2011ISBN 978 0 580 72291 2ICS 59.140.30Compliance with a British Standard cannot confer immunity
4、fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 September 2011.Amendments issued since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 17230 September 2011 ICS 59.140.30 Supersedes
5、 EN 14289:2003English Version Leather - Physical and mechanical tests - Determination of water penetration pressure (ISO 17230:2006) Cuir - Essais physiques et mcaniques - Dtermination de la pression de pntration de leau (ISO 17230:2006) Leder - Physikalische und mechanische Prfungen - Bestimmung de
6、s Wasserdurchlssigkeitsdruckes (ISO 17230:2006) This European Standard was approved by CEN on 18 August 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alter
7、ation. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made
8、 by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estoni
9、a, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPI
10、SCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 17230:2011: EBS EN ISO 17230:2011EN ISO 17230:2011 (E) 3 Foreword The text of ISO 17230:2006 has
11、 been prepared by International Union of Leather Technologists and Chemists Societies and has been taken over as EN ISO 17230:2011 by Technical Committee CEN/TC 289 “Leather” the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by p
12、ublication of an identical text or by endorsement, at the latest by March 2012, and conflicting national standards shall be withdrawn at the latest by March 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC
13、shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14289:2003. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bul
14、garia, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notic
15、e The text of ISO 17230:2006 has been approved by CEN as a EN ISO 17230:2011 without any modification. BS EN ISO 17230:2011ISO 17230:2006(E) IULTCS/IUP 45:2006(E) ISO 2006 All rights reserved iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national s
16、tandards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International
17、organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules gi
18、ven in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least
19、 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 17230 was prepared by the Physical Test Commission of
20、the International Union of Leather Technologists and Chemists Societies (IUP Commission, IULTCS) in collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/TC 289, Leather, the secretariat of which is held by UNI. It was published as EN 14289. It is based on IUP 4
21、5 published in J. Soc. Leather Tech. Chem., 86 (7), p. 345, 2002, and declared an official method of the IULTCS in May 2003. IULTCS, originally formed in 1897, is a world-wide organization of professional leather societies to further the advancement of leather science and technology. IULTCS has thre
22、e Commissions, which are responsible for establishing international methods for the sampling and testing of leather. ISO recognizes IULTCS as an international standardizing body for the preparation of test methods for leather. BS EN ISO 17230:2011BS EN ISO 17230:2011INTERNATIONAL STANDARD ISO 17230:
23、2006(E)IULTCS/IUP 45:2006(E) ISO 2006 All rights reserved 1Leather Physical and mechanical tests Determination of water penetration pressure 1 Scope This International Standard describes a method for determining the water penetration pressure of leather. 2 Normative references The following referenc
24、ed documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 2418, Leather Chemical, physical and mechanical and fastness tests
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
本资源只提供5页预览,全部文档请下载后查看!喜欢就下载吧,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BSENISO172302011LEATHERPHYSICALANDMECHANICALTESTSDETERMINATIONOFWATERPENETRATIONPRESSURE 皮革制品 物理 机械 试验

链接地址:http://www.mydoc123.com/p-581287.html