1、BRITISH STANDARD BS ISO 1268-9:2003 Fibre-reinforced plastics Methods of producing test plates Part 9: Moulding of GMT/STC ICS 83.120 BS ISO 1268-9:2003 This British Standard was published under the authority of the Standards Policy and S t r a t e g y C o m m i t t e e o n 14 April 2003 BSI 14 Apri
2、l 2003 ISBN 0 580 41555 4 National foreword This British Standard reproduces verbatim ISO 1268-9:2003 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee PRI/42, Fibre reinforced thermosetting plastics and prepregs, which has th
3、e responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found in the BSI Catalogue under the section entitled “Interna
4、tional Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a Brit
5、ish Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international an
6、d European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii to iv, pages 1 to 4, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document
7、 was last issued. Amendments issued since publication Amd. No. Date Comments Reference number ISO 1268-9:2003(E)INTERNATIONAL STANDARD ISO 1268-9 First edition 2003-03-15 Fibre-reinforced plastics Methods of producing test plates Part 9: Moulding of GMT/STC Plastiques renforcs de fibres Mthodes de fabrication de plaques dessai Partie 9: Moulage des GMT/STC BSISO12689:2003
