1、BS ISO 2584:2016Cylindrical cutters with plainbore and key drive MetricseriesBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS ISO 2584:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO 2584:2016.The UK participation in its
2、preparation was entrusted to TechnicalCommittee MTE/18, Tools tips and inserts for cutting applications.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are r
3、esponsible for its correctapplication. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 83629 9ICS 25.100.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStanda
4、rds Policy and Strategy Committee on 31 October 2016.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS ISO 2584:2016 ISO 2016Cylindrical cutters with plain bore and key drive Metric seriesFraises cylindriques 1 taille, surfacer, alsage lisse, entranement par clavette Srie
5、mtriqueINTERNATIONAL STANDARDISO2584Second edition2016-10-15Reference numberISO 2584:2016(E)BS ISO 2584:2016ISO 2584:2016(E)ii ISO 2016 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2016, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may b
6、e reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the re
7、quester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgBS ISO 2584:2016ISO 2584:2016(E)Foreword iv1 Scope . 12 Normative references 13 Dimensions . 13.1 Solid cutters . 13.2 Interlocking cutters. 2
8、Annex A (informative) Relationship between designations in this International Standard and ISO 13399 (all parts) 3Bibliography 4 ISO 2016 All rights reserved iiiContents PageBS ISO 2584:2016ISO 2584:2016(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of
9、national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. Inte
10、rnational organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those int
11、ended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see ww
12、w.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document
13、will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expre
14、ssions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.The committee responsible for this document is ISO/TC 29, Small tools, S
15、ubcommittee SC 2, Holding tools, adaptive items and interfaces.This second edition cancels and replaces the first edition (ISO 2584:1972), of which it constitutes a minor revision, notably with the addition of Annex A, which gives the relationship between the designations of this International Stand
16、ard and the ISO 13399 series.iv ISO 2016 All rights reservedBS ISO 2584:2016Cylindrical cutters with plain bore and key drive Metric series1 ScopeThis International Standard specifies the dimensions of metric series cylindrical cutters with plain bore and key drive, intended for fitting to cutter ar
17、bors.It is applicable to solid cutters and also to interlocking cutters.Solid cutters are made either with straight teeth or with helicoidal teeth angled to the right or left; interlocking cutters are always made with straight or helicodial teeth angled to the left and right alternately.The range of
18、 outside diameters of these cutters is taken from ISO 523.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the lates
19、t edition of the referenced document (including any amendments) applies.ISO 240, Milling cutters Interchangeability dimensions for cutter arbors or cutter mandrels 3 Dimensions3.1 Solid cuttersFigure 1 Solid cuttersTable 1Dimensions in millimetresDJs16daH7L40 50 63 70 80 100 12550 22 X X X63 27 X X8
20、0 32 X X100 40 X XaThe bore and key way dimensions shall be in accordance with the metric series of ISO 240.INTERNATIONAL STANDARD ISO 2584:2016(E) ISO 2016 All rights reserved 1BS ISO 2584:2016ISO 2584:2016(E)3.2 Interlocking cuttersFigure 2 Interlocking cuttersTable 2Dimensions in millimetresDJs16
21、daH7L80 100 125 160 200 25080 32 X X100 40 X X125 50 X X160 60 X XaThe bore and key way dimensions shall be in accordance with the metric series of ISO 240.2 ISO 2016 All rights reservedBS ISO 2584:2016ISO 2584:2016(E)Annex A (informative) Relationship between designations in this International Stan
22、dard and ISO 13399 (all parts)For relationship between designations in this International Standard and preferred symbols according to ISO 13399 (all parts), see Table A.1.Table A.1 Relationship between designations in this International Standard and ISO 13399 (all parts)Symbol in ISO 2584 Reference
23、in ISO 2584Property name in ISO 13399 (all parts)Symbol in ISO 13399 (all parts)Reference in ISO 13399 (all parts)DFigures 1 and 2 Tables 1 and 2cutting diameter DC 71D084653E57FdFigures 1 and 2 Tables 1 and 2connection diameter machine sideDCONMS 71EBDBF5060E6d H7 Tables 1and 2tolerance class conne
24、ction diameter machine sideTCDCONMS 72719B2BD8041LFigures 1 and 2 Tables 1 and 2overall length OAL 71D078EB7C086 ISO 2016 All rights reserved 3BS ISO 2584:2016ISO 2584:2016(E)Bibliography1 ISO 523,1)Milling cutters Recommended range of outside diameters2 ISO 13399 (all parts), Cutting tool data repr
25、esentation and exchange1) Withdrawn.4 ISO 2016 All rights reservedBS ISO 2584:2016BS ISO 2584:2016ISO 2584:2016(E) ISO 2016 All rights reservedICS 25.100.20Price based on 4 pagesThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-
26、related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)About usWe bring together business, industry, government, consumers, innovators and othe
27、rs to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to hel
28、p them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PD
29、F versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Cus
30、tomer Services team.Copyright in BSI publicationsAll the content in BSI publications, including British Standards, is the property of and copyrighted by BSI or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licens
31、ed such information to BSI for commercial publication and use.Save for the provisions below, you may not transfer, share or disseminate any portion of the standard to any other person. You may not adapt, distribute, commercially exploit, or publicly display the standard or any portion thereof in any
32、 manner whatsoever without BSIs prior written consent.Storing and using standardsStandards purchased in soft copy format: A British Standard purchased in soft copy format is licensed to a sole named user for personal or internal company use only. The standard may be stored on more than 1 device prov
33、ided that it is accessible by the sole named user only and that only 1 copy is accessed at any one time. A single paper copy may be printed for personal or internal company use only.Standards purchased in hard copy format: A British Standard purchased in hard copy format is for personal or internal
34、company use only. It may not be further reproduced in any format to create an additional copy. This includes scanning of the document.If you need more than 1 copy of the document, or if you wish to share the document on an internal network, you can save money by choosing a subscription product (see
35、Subscriptions).Reproducing extractsFor permission to reproduce content from BSI publications contact the BSI Copyright & Licensing team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to Bri
36、tish Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discoun
37、ts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find o
38、ut more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, y
39、ou can be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity w
40、ithin a British Standard or other BSI publication please inform the Knowledge Centre.Useful ContactsCustomer ServicesTel: +44 345 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 345 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Group Headquarters389 Chiswick High Road London W4 4AL UKBSI Back Cover.indd 1 27/01/2016 14:20
