CECS 441-2016 Design standard for indoor environment of urban underground space《城市地下空间内部环境设计标准》.pdf

相关资源

CECS 441-2016 城市地下空间内部环境设计标准.pdf

GB T 24975.1-2010 低压电器环境设计导则 第1部分：总则.pdf

GB T 24976.3-2010 电器附件环境设计导则 第3部分：家用和类似用途电缆卷盘.pdf

GB T 24976.4-2010 电器附件环境设计导则 第4部分：工业用插头插座和耦合器.pdf

GB T 24976.5-2010 电器附件环境设计导则 第5部分：家用和类似用途插头插座.pdf

GB T 24976.6-2010 电器附件环境设计导则 第6部分：家用和类似用途器具耦合器.pdf

GB T 24976.7-2010 电器附件环境设计导则 第7部分：家用和类似用途低压电器用连接器件.pdf

GB T 24976.8-2010 电器附件环境设计导则 第8部分：家用和类似用途固定式电器装置的开关.pdf

GB T 24975.5-2010 低压电器环境设计导则 第5部分：熔断器.pdf

GB T 24975.7-2010 低压电器环境设计导则 第7部分：接线端子.pdf

猜你喜欢

AASHTO TP 86-2010 Standard Method of Test for Accelerated Aging of Bituminous Sealants and Fillers Using a Vacuum Oven.pdf

AASHTO TP 87-2010 Standard Method of Test for Measuring Low-Temperature Flexural Creep Stiffness of Bituminous Sealants and Fillers by Bending Beam Rheometer (BBR).pdf

AASHTO TP 88-2010 Standard Method of Test for Evaluation of the Low-Temperature Tensile Property of Bituminous Sealants by Direct Tension Test.pdf

AASHTO TP 89-2010 Standard Method of Test for Measuring Adhesion of Hot-Poured Crack Sealant Using Direct Adhesion Tester.pdf

AASHTO TP 90-2016 Standard Method of Test for Measuring Interfacial Fracture Energy of Hot-Poured Crack Sealant Using a Blister Test.pdf

AASHTO TP 91-2015 Standard Method of Test for Determining Asphalt Binder Bond Strength by Means of the Binder Bond Strength (BBS) Test.pdf

AASHTO TP 92-2014 Standard Method of Test for Determining the Cracking Temperature of Asphalt Binder Using the Asphalt Binder Cracking Device (ABCD).pdf

AASHTO TP 96-2013 Standard Method of Test for Protective Sealers for Portland Cement Concrete.pdf

AASHTO TP 98-2013 Standard Method of Test for Determining the Influence of Road Surfaces on Vehicle Noise Using the Statistical Isolated Pass-By (SIP) Method.pdf