[工程类试卷]桥涵工程基础检测练习试卷2及答案与解析.doc

上传人:dealItalian200 文档编号:614381 上传时间:2018-12-20 格式:DOC 页数:10 大小:37KB
下载 相关 举报
[工程类试卷]桥涵工程基础检测练习试卷2及答案与解析.doc_第1页
第1页 / 共10页
[工程类试卷]桥涵工程基础检测练习试卷2及答案与解析.doc_第2页
第2页 / 共10页
[工程类试卷]桥涵工程基础检测练习试卷2及答案与解析.doc_第3页
第3页 / 共10页
[工程类试卷]桥涵工程基础检测练习试卷2及答案与解析.doc_第4页
第4页 / 共10页
[工程类试卷]桥涵工程基础检测练习试卷2及答案与解析.doc_第5页
第5页 / 共10页
点击查看更多>>
资源描述

1、桥涵工程基础检测练习试卷 2 及答案与解析一、单项选择题1 超声波法检测桩身完整性,当桩径不大于 1.5m 时,应埋设( )根声测管。(A)2(B) 3(C) 4(D)52 超声波法检测桩身完整性,当桩径大于 1.5m 时,应埋设 ( )根声测管。(A)2(B) 3(C) 4(D)53 超声波法检测桩身完整性,则其量测间距不宜大于( )mm。(A)200(B) 250(C) 400(D)500mm4 超声波法检测桩身完整性,声速临界值取( )。 5 超声波法检测桩身完整性,PSD 判据增大了( )权数。(A)波形(B)波幅(C)频率(D)声时差值6 超声波法检测桩身完整性,波幅临界值取( )。

2、A)A m-2(B) Am-4(C) Am-5(D)A m-67 超声波法检测桩身完整性,各声测剖面每个测点的声速、波幅均大于临界值,波形正常,则该类桩属于( )。(A)类(B) 类(C) 类(D)类8 超声波法检测桩身完整性,某一声测剖面连续各个测点或某一深度桩截面处的声速、波幅值小于临界值,PSD 值变大,波形畸形,则该类桩属于( )。(A)类(B) 类(C) 类(D)类9 采用锚桩承载梁作为基桩静荷载试验承载反力装置,要求提供反力应不小于最大试验荷载的( ) 倍。(A)12(B) 11.5(C) 1.31.5(D)1.32.010 基桩静载试验采用压重平台反力装置时,要求压重不得小于预

3、估最大试验荷载的( )倍。(A)1.2(B) 1.5(C) 2.0(D)2.511 基桩静载试验,对施工检验性试验,一般可采用设计荷载的( )倍。(A)1.2(B) 1.5(C) 2.0(D)2.512 基桩静载试验,每级加载下沉量,在规定的时间内如不大于( )mm 可认为稳定。(A)0.001(B) 0.01(C) 0.1(D)1mm13 基桩静载试验,每级加载量一般为预估最大荷载的( )。(A)1/101/5(B) 1/151/5(C) 1/151/8(D)1/151/1014 高应变检测单桩轴向抗压承载力时,激振锤的质量不得小于基桩极限承载力的( )。(A)1.0%(B) 1.2%(C)

4、 1.5%(D)2.0%15 高应变检测单桩轴向抗压承载力时,采用自由落锤为激振设备,宜重锤低击,锤的最大落距不宜大于( )m。(A)0.5(B) 1(C) 2(D)316 一般正常混凝土的波速是( )m/s。(A)35004500(B) 25003500(C) 15002000(D)4000500017 标准贯入试验触探落锤质量为( )kg。(A)10.0(B) 28.0(C) 60.0(D)63.518 标准贯入试验对估计( )的天然密度十分有用。(A)砂类土(B)黏性土(C)粉土(D)黄土19 采用钻孔法判断桩内缺陷时,在检测管内应( )。(A)直接放入换能器进行检测即可(B)注入泥浆(

5、C)应注满清水(D)注满机油20 基桩垂直静载试验中,对于砂类土,在最后( )min 内,如果下沉量小于0.1mm,即可视为休止。(A)10(B) 20(C) 30(D)4021 桩长 25m 的钻孔桩,灌注水下混凝土应制取( )组混凝土试件。(A)1(B) 2(C) 3(D)422 在桩超声波脉冲检测中,换能器在声测管内用( )耦合。(A)空气(B)清水(C)泥水(D)盐水23 基桩静荷载试验时正确的卸载方法是( )。(A)卸载应分级进行,每级卸载量为 2 倍加载级的荷载值(B)卸载应分级进行,每级卸载量为加载级的荷载值(C)卸载应分级进行,每级卸载量为 2 倍加载级的荷载值。每级荷载卸载后

6、应观测桩顶的回弹量,直到回弹稳定后,再卸载下一级荷载(D)一次卸载到零桥涵工程基础检测练习试卷 2 答案与解析一、单项选择题1 【正确答案】 B【知识模块】 桥涵工程基础检测2 【正确答案】 C【知识模块】 桥涵工程基础检测3 【正确答案】 B【知识模块】 桥涵工程基础检测4 【正确答案】 B【知识模块】 桥涵工程基础检测5 【正确答案】 D【知识模块】 桥涵工程基础检测6 【正确答案】 D【知识模块】 桥涵工程基础检测7 【正确答案】 A【知识模块】 桥涵工程基础检测8 【正确答案】 C【知识模块】 桥涵工程基础检测9 【正确答案】 C【知识模块】 桥涵工程基础检测10 【正确答案】 C【

7、知识模块】 桥涵工程基础检测11 【正确答案】 C【知识模块】 桥涵工程基础检测12 【正确答案】 C【知识模块】 桥涵工程基础检测13 【正确答案】 D【知识模块】 桥涵工程基础检测14 【正确答案】 B【知识模块】 桥涵工程基础检测15 【正确答案】 C【知识模块】 桥涵工程基础检测16 【正确答案】 A【知识模块】 桥涵工程基础检测17 【正确答案】 D【知识模块】 桥涵工程基础检测18 【正确答案】 A【知识模块】 桥涵工程基础检测19 【正确答案】 C【知识模块】 桥涵工程基础检测20 【正确答案】 C【知识模块】 桥涵工程基础检测21 【正确答案】 C【知识模块】 桥涵工程基础检测22 【正确答案】 B【知识模块】 桥涵工程基础检测23 【正确答案】 C【知识模块】 桥涵工程基础检测

展开阅读全文
相关资源
猜你喜欢
  • BS EN ISO 11138-3-2017 Sterilization of health care products Biological indicators Biological indicators for moist heat sterilization processes《医疗保健产品灭菌 生物指示物 湿热灭菌处理用生物指示剂》.pdf BS EN ISO 11138-3-2017 Sterilization of health care products Biological indicators Biological indicators for moist heat sterilization processes《医疗保健产品灭菌 生物指示物 湿热灭菌处理用生物指示剂》.pdf
  • BS EN ISO 11138-4-2017 Sterilization of health care products Biological indicators Biological indicators for dry heat sterilization processes《医疗保健产品灭菌 生物指示物 干热灭菌用生物指示剂》.pdf BS EN ISO 11138-4-2017 Sterilization of health care products Biological indicators Biological indicators for dry heat sterilization processes《医疗保健产品灭菌 生物指示物 干热灭菌用生物指示剂》.pdf
  • BS EN ISO 11138-5-2017 Sterilization of health care products Biological indicators Biological indicators for low-temperature steam and formaldehyde sterilization processes《医疗保健产品灭菌.pdf BS EN ISO 11138-5-2017 Sterilization of health care products Biological indicators Biological indicators for low-temperature steam and formaldehyde sterilization processes《医疗保健产品灭菌.pdf
  • BS EN ISO 11140-1-2014 Sterilization of health care products Chemical indicators General requirements《保健产品的灭菌 化学指示剂 一般要求》.pdf BS EN ISO 11140-1-2014 Sterilization of health care products Chemical indicators General requirements《保健产品的灭菌 化学指示剂 一般要求》.pdf
  • BS EN ISO 11140-3-2009 Sterilization of health care products - Chemical indicators - Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test《保健品灭菌 化学指示剂.pdf BS EN ISO 11140-3-2009 Sterilization of health care products - Chemical indicators - Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test《保健品灭菌 化学指示剂.pdf
  • BS EN ISO 11140-4-2007 Sterilization of health care products - Chemical indicators - Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam pen.pdf BS EN ISO 11140-4-2007 Sterilization of health care products - Chemical indicators - Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam pen.pdf
  • BS EN ISO 11143-2008 Dental equipment - Amalgam separators《牙科设备 汞齐合金分离器》.pdf BS EN ISO 11143-2008 Dental equipment - Amalgam separators《牙科设备 汞齐合金分离器》.pdf
  • BS EN ISO 11145-2016 Optics and photonics Lasers and laser-related equipment Vocabulary and symbols《光学和光子学 激光器和激光相关设备 词汇和符号》.pdf BS EN ISO 11145-2016 Optics and photonics Lasers and laser-related equipment Vocabulary and symbols《光学和光子学 激光器和激光相关设备 词汇和符号》.pdf
  • BS EN ISO 11146-1-2005 Lasers and laser-related equipment - Test methods for laser beam widths divergence angles and beam propagation ratios - Stigmatic and simple astigmatic beams.pdf BS EN ISO 11146-1-2005 Lasers and laser-related equipment - Test methods for laser beam widths divergence angles and beam propagation ratios - Stigmatic and simple astigmatic beams.pdf
  • 相关搜索

    当前位置:首页 > 考试资料 > 职业资格

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1