CSN 72 1073-1971 Determination of change in length of ceramic materials by drying and calcining《通过分割和分解测定陶瓷材料长度的变化》.pdf

相关资源

CB 1125-1998 水声用压电陶瓷材料规范.pdf

CB-Z 162-1979 压电陶瓷材料线胀系数a,1测量方法.pdf

CB-Z 165-1979 压电陶瓷材料等静压压电应变常数d,H测量方法.pdf

CB-Z 166-1979 压电陶瓷材料体积电阻率ρ,V测量方法.pdf

JC T 2019-2010 陶瓷材料的热分析-质谱同时联用测定方法.pdf

JC T 2143-2012 四方相氧化锆陶瓷材料.pdf

HG T 3210-2002 耐酸陶瓷材料性能试验方法.pdf

SJ-Z 1463-1979 无线电陶瓷材料化学分析方法的一般要求.pdf

YY T 0110-1993 医用超声压电陶瓷材料.pdf

YY T 0110-2009 医用超声压电陶瓷材料.pdf

猜你喜欢

ASTM C1786-2018 Standard Specification for Segmental Precast Reinforced Concrete Box Sections for Culverts Storm Drains and Sewers Designed According to AASHTO LRFD《根据AASHTO LRFD设计.pdf

ASTM C1787-2014 Standard Specification for Installation of Non Metallic Plaster Bases &40 Lath&41 Used with Portland Cement Based Plaster in Vertical Wall Applications《垂直墙体中与硅酸盐水泥基.pdf

ASTM C1788-2014 Standard Specification for Non Metallic Plaster Bases &40 Lath&41 Used with Portland Cement Based Plaster in Vertical Wall Applications《直墙应用件中使用带波特兰水泥基塑料的非金属石膏基 (板条.pdf

ASTM C1789-2013 Standard Test Method for Use and Calibration of Hand-Held Moisture Meters on Gypsum Panels《在石膏面板上使用和校准手持式湿度计的标准试验方法》.pdf

ASTM C1789-2014 Standard Test Method for Calibration of Hand-Held Moisture Meters on Gypsum Panels《石膏板上手持水分仪校正的标准试验方法》.pdf

ASTM C1789-2014(2018) Standard Test Method for Calibration of Hand-Held Moisture Meters on Gypsum Panels.pdf

ASTM C179-2004 Standard Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens《耐火塑料和冲击混合样品的干燥和焙烧线性改变的标准试验方法》.pdf

ASTM C179-2009 Standard Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens《耐火塑料和冲击混合样品的干燥和焙烧收缩的标准试验方法》.pdf

ASTM C179-2011 Standard Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens《干燥和烘焙线性变化耐火塑料和捣打料样品的标准试验方法》.pdf