CSN 99 0652-1990 Vernier callipers reading to 0 02 mm《游标卡尺读数至0 02毫米》.pdf

相关资源

HB 2074-1989 内孔空刀槽径用游标卡尺（B=6~100mm）.pdf

HB 2075-1989 内孔空刀槽径用游标卡尺.pdf

HB 2076-1989 倒角游标卡尺 α=30°、45°.pdf

HB 3556-1985 高度游标卡尺技术条件.pdf

HB 3557-1985 高度游标卡尺检定规程.pdf

HB 3558-1985 高度游标卡尺.pdf

HB 3559-1985 高度游标卡尺.pdf

HB 4206-1989 壁厚游标卡尺.pdf

HB 4207-1989 内孔空刀槽径用游标卡尺.pdf

HB 4497-1990 游标卡尺质量分等规定.pdf

猜你喜欢

ASTM D633-2011 Standard Volume Correction Table for Road Tar《公路柏油量标准校正表》.pdf

ASTM D633-2011(2016) Standard Volume Correction Table for Road Tar《筑路焦油的标准体积修正表》.pdf

ASTM D635-2006 Standard Test Method for Rate of Burning and or Extent and Time of Burning of Plastics in a Horizontal Position《塑料在水平状态时的燃烧速率或者燃烧蔓延程度及燃烧时间的标准试验方法》.pdf

ASTM D635-2010 Standard Test Method for Rate of Burning and or Extent and Time of Burning of Plastics in a Horizontal Position《塑料在水平位置条件下的燃烧速度和 或燃烧范围和时间的标准试验方法》.pdf

ASTM D635-2014 Standard Test Method for Rate of Burning and or Extent and Time of Burning of Plastics in a Horizontal Position《塑料在水平状态时的燃烧速率和 或燃烧蔓延程度及燃烧时间的标准试验方法》.pdf

ASTM D638-2003 Standard Test Method for Tensile Properties of Plastics《塑料抗拉特性的标准试验方法》.pdf

ASTM D638-2008 Standard Test Method for Tensile Properties of Plastics.pdf

ASTM D638-2010 Standard Test Method for Tensile Properties of Plastics《塑料的拉伸性能的标准试验方法》.pdf

ASTM D638-2014 Standard Test Method for Tensile Properties of Plastics《塑料拉伸属性的标准试验方法》.pdf