CNS 10013-1983 Method of Test for Acrylonitrile Butadiene Rubber (NBR) Latex《丙烯睛丁二烯合成橡胶乳胶检验法》.pdf

相关资源

CB T 3700-1995 增强合成橡胶或增强塑料充气艇.pdf

SH T 0691-2000 润滑剂的合成橡胶溶胀性测定法.pdf

SH T 0429-1992 润滑脂与合成橡胶相容性测定法.pdf

SH T 1760-2007 合成橡胶胶乳中残留单体和其他有机成分的测定 毛细管柱气相色谱 直接液体进样法.pdf

SH T 1799-2016 合成橡胶胶乳 玻璃化转变温度的测定 差示扫描量热法（DSC）.pdf

SH T 1149-2006 合成橡胶胶乳 取样.pdf

GB T 5577-2008 合成橡胶牌号规范.pdf

GB 6735-1986 合成橡胶试样制备.pdf

SH T 1153-2011 合成橡胶胶乳.凝固物含量（筛余物）的测定.pdf

SH T 1154-2011 合成橡胶胶乳总固物含量的测定.pdf

猜你喜欢

ASTM D3236-1988(2009) Standard Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials《热熔粘合剂及涂层材料表观粘度的标准试验方法》.pdf

ASTM D3236-1988(2014) Standard Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials《热熔粘合剂及涂层材料表观粘度的标准试验方法》.pdf

ASTM D3236-2015 Standard Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials《热熔性胶粘剂和涂层材料的表观密度的标准试验方法》.pdf

ASTM D3237-2006e1 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy《原子吸收光谱法测定汽油中铅含量的标准试验方法》.pdf

ASTM D3237-2012 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy《原子吸收光谱法测定汽油中铅含量的标准试验方法》.pdf

ASTM D3237-2017 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy《采用原子吸收光谱法测定汽油中铅含量的标准试验方法》.pdf

ASTM D3238-1995(2005) Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method《n-d-M法计算石油中碳分布及结构基团分析的标准试验方法》.pdf

ASTM D3238-1995(2010) Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method《n-d-M法计算石油中碳分布及结构基团分析的标准试验方法》.pdf

ASTM D3238-1995(2015) Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method《使用n-d-M法分析石油中碳分布和结构基团的标准试验方法》.pdf