CNS 10253-1983 Fiberglass Reinforced Plastic Doors of Provisions Refrigerating Chamber for Marine Use《船舶冷藏粮食库用玻璃纤维强化塑料门》.pdf

相关资源

JIS A4110-1989 玻璃纤维增强聚酯造整体式水箱.pdf

JIS A4110-2008 玻璃纤维增强聚酯造整体式水箱(修改件1).pdf

JIS A5701-1995 玻璃纤维增强塑料波纹板.pdf

JIS R3420-1999 玻璃纤维一般试验方法 解释.pdf

JIS A4101-1994 抽水马桶用玻璃纤维增强塑料制污物处理装置结构件.pdf

JIS A5350-1991 玻璃纤维增强的复合管.pdf

JIS A5350-2006 玻璃纤维增强的复合管(修改件1).pdf

JIS A5712-1994 带洗涤槽的玻璃纤维增强塑料浴盆.pdf

JIS F1034-1-2002 小型船舶.船身结构.船材尺寸.第1部分材料标准叠层玻璃纤维增强热固性树脂.pdf

JIS K7034-2003 塑料管道系统.玻璃纤维增强热固性塑料(GRP)管道和配件.在偏移条件下内截面耐化学侵蚀的测定.pdf

猜你喜欢

ANSI AWWA C511-2017 Reduced-Pressure Principle Backflow Prevention Assembly.pdf

ANSI AWWA C512-2015 Air-Release Air Vacuum and Combination Air Valves for Water and Wastewater Service.pdf

ANSI AWWA C514-2015 Air Valve and Vent Inflow Preventer Assemblies for Potable Water Distribution System and Storage Facilities (First Edition).pdf

ANSI AWWA C515-2015 Reduced-Wall Resilient-Seated Gate Valves for Water Supply Service.pdf

ANSI AWWA C516-2014 Large-Diameter Rubber-Seated Butterfly Valves Sizes 78 In (2 000 mm) and Larger (First Edition).pdf

ANSI AWWA C517-2016 Resilient-Seated Cast-Iron Eccentric Plug Valves.pdf

ANSI AWWA C518-2013 Dual-Disc Swing-Check Valves for Waterworks Service《给水厂设备用双垫圈回转止回阀》.pdf

ANSI AWWA C520-2014 Knife Gate Valves Sizes 2 In (50 mm) Through 96 In (2 400 mm).pdf

ANSI AWWA C530-2017 Pilot-Operated Control Valves.pdf